Data Sheet Mechanical Drawing 11.0 MAX IN06092 YYWW ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 8.0 MAX General Information Item Inductance @0Adc IN06092 0 Inductor (a) AUG-07-2009 ---Specification Pins Spec S-F Inductance @Isat at 25degC S - F 300 nH +/- 15% 215 nH min DCR S-F Isat at 25degC S-F 30 Adc max Isat at -40degC S-F 32 Adc max Isat +125degC S-F 25 Adc max Idc S-F 39 Adc max 7.0 MAX Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) 2.1 +/- 0.15 (b) 2.5 +/- 0.3 unit:mm Sample Test Data Test Condition 1 MHz, 0.1Vrms, series 1 MHz, 0.1Vrms, series (30 Adc) 0.48 mOhm +/- 10% +25 deg C Schematic Recommended PCB Layout Remark 1. S 3.5 11.2 F Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 0 Description Initial release Isat is the current at which the inductance drops by 15% typ. 2. Idc is the current at which the temperature of the part increases by 40 deg C. 2.5 3. Inductance vs. Current Curve and Temperature vs. Current Curve as attached. unit:mm 4. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. 5. This is RoHS compliant product. PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/8/7 2009/8/7 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN06092 Inductance vs. Current 100.0 90.0 80.0 -40 degC 70.0 +125 degC 60.0 50.0 40.0 0 5 10 15 20 25 30 35 Current (A) Temperature VS Current Temperature(degC) % Inductance +25 degC 100 80 60 40 20 0 0 10 20 30 40 50 Current (DC) PAGE 2 OF 2