Data Sheet Mechanical Drawing 11.0 MAX IN06156 YYWW ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 7.2 MAX General Information Item Inductance @0Adc IN06156 0 Inductor AUG-07-2009 ---Specification Pins Spec S-F Inductance @Isat at 25degC S - F 150 nH +/- 15% 102 nH min DCR S-F Isat at 25degC S-F 64 Adc max Isat at +125degC S-F 48 Adc max Isat at -40degC S-F 65 Adc max Idc S-F 39 Adc max 7.5 MAX Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) (a) 2.5 1.6 (b) unit:mm Sample Test Data Test Condition 1 MHz, 0.1Vrms, series 1 MHz, 0.1Vrms, series (64 Adc) 0.47 mOhm +/- 10% +25 deg C Recommended PCB Layout Schematic Remark 1. S 3.5 11.2 F Isat is the current at which the inductance drops by 15%. 2. Idc is the current at which the temperature of the part increases by 50 deg C. 2.5 3. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. unit:mm 4. This is RoHS compliant product. 5. The max operating temperature is 130degC (ambient + temperature rise). 6. Inductance vs. Current Curve as attached. Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 0 Description Initial release PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/8/7 2009/8/7 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN06156 Inductance vs. Current 100.0 % Inductance 90.0 +25 degC 80.0 70.0 +125 degC 60.0 50.0 40.0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 Current (A) PAGE 2 OF 2