Data Sheet Mechanical Drawing 11.0 MAX IN08078 YYWW ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 7.2 MAX Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) 0.1 max for coplanarity IN08078 0 Inductor AUG-07-2009 ---- Item 7.5 MAX General Information 1.6 +/- 0.1 (a) (b) 2.5 +/- 0.2(x2) unit:mm Specification Spec Pins Sample Test Data Test Condition Inductance @0Adc S-F 300 nH +/- 10% Inductance @Isat at 25degC S-F 216 nH min DCR S-F Isat at 25degC S-F 34 Adc max Isat at +125degC S-F 25 Adc max Idc S-F 45 Adc max 1 MHz, 0.1Vrms, series 1 MHz, 0.1Vrms, series (34 Adc) 0.29 mOhm +/- 10% +25 deg C Recommended PCB Layout Schematic 1. 3.5 S Remark 11.2 F Isat is the current at which the inductance drops by 20%. 2. Idc is the current at which the 2.5 temperature of the part increases by 50 deg C. 3. Inductance vs. Current Curve and Temperature vs. Current Curve as unit:mm attached. 4. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. 5. This is RoHS compliant product. 6. The max operating temperature is 130degC (ambient + temperature rise). Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 0 Description Initial release PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/8/7 2009/8/7 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN08078 Inductance vs. Current 100.0 +25 degC 80.0 +125 degC 70.0 60.0 50.0 40.0 0 5 10 15 20 25 30 35 Current (A) Temperature VS Current Temperature(degC) % Inductance 90.0 100.0 80.0 60.0 40.0 20.0 0.0 0 5 10 15 20 25 30 35 40 45 50 Current (DC) PAGE 2 OF 2