Conventional MASTR® III Station VHF, UHF, 800 MHz The Conventional MASTR III Base Station provides A comprehensive array of control capabilities The latest in digital signal processing technology Fully shielded and removable modules, front-mounted controls, and remote diagnostics The Conventional MASTR III provides the flexibility to change system setup as necessary. Whether users are designing a system, programming radio functions, or arranging an installation site, MASTR III keeps pace with their needs. Flexible, Efficient Design The microprocessorcontrolled, PC programmable options provide flexibility, simplified setup, and easy field upgrades. The fully synthesized design of the MASTR III Base Station allows the user to make frequency changes Public Safety and Professional Communications | www.pspc.harris.com 221 Jefferson Ridge Parkway | Lynchburg, VA USA 24501 | 1-800-368-3277 (+1-434-455-6403) Harris, assuredcommunications, and MASTR are registered trademarks of Harris Corporation. Aegis is a trademark of Harris Corporation. Copyright 2012 Harris Corporation. All rights reserved. Printed in U.S.A. 01/12 ECR-5778W quickly, easily, and affordably. In addition, the MASTR III can operate in either a wideband (25 kHz) or narrowband (12.5 kHz) mode. The modular design of the MASTR III Base Station makes maintenance and servicing simple and fast. Each module furnishes easyto-read indications of proper operation. Equipment is available in 37-inch, 69-inch, or 83-inch cabinets or an 86-inch open rack. Backward Compatible The MASTR III Base Station can be used in combination with MASTR II or IIe stations. The MASTR III is readily upgradeable through software revisions. Technical specifications are subject to change without notice. Product sales are subject to applicable U.S. export control laws. Conventional Options and Accessories Programmable Options General Specifications Conventional Tone and DC Remote Controlled Stations Transmit Frequencies Receive Frequencies Channel Guard Digital and Tone Channel Guard Disable Repeater Disable Intercom Function DTMF Decode Morse Code ID Squelch Tail Elimination (STE) Carrier Control Timer Station Control DC Control Tone Control Repeater DC/Repeat Tone/Repeat 2- or 4-Wire Audio Scan Audio (Line to Transmitter) Line Terminating Impedance: Line Level (Adjustable): Frequency Response: Tone Control Function Tones: 1050,1150,1250,1350,1450, 1550,1650, 1750,1850,1950 and 2050 Hz 2175 Hz 20 dB Below Voice Weight (min) [(lb (kg)] Continuous Duty Packed, Domestic Shipping Number of Rack Units Max. Units w/Power Supply 10 K 1 V RMS (for 5 kHz Deviation) 600 +7 dBm (Adjustable) +7 dBm (Reference 7 dBm) +1 and -3 dB @ 300-3000 Hz -55 dB (Reference 7 dBm) -30 dB (Reference 7 dBm) -2.5, ±6, and ±11 mA 11 K (Includes 3K Termination) VOLUME RX SYNTHESIZER RX FRONT END RX IF 69.1 (175) 23.1 (59) 21.0 (53) 83.0 (211) 23.1 (59) 21.0 (53) 121 (55) 136 (62) 576 (261) 606 (275) 693 (315) 729 (331) 17 1 33 4 41 5 SQUELC H PA ALARM DATA PORT -22 to +140oF (-30 to +60oC) 90% @ 122oF (50oC) 120 VAC (±20%), 47-63 Hz 230 VAC (±15%), 47-63 Hz 26.4 VDC, 50 AHR (min.) Type N 10 ft (3048 mm) Provided through Handset or TQ0619 Software Up to 15,000 ft (4,570 m) Up to 50,000 ft (15,250 m) VHF UHF 800 Frequency Range (MHz) 136-174 380-512 5A @ 120 VAC or 3A @ 230 VAC 5A @ 120 VAC or 3A @ 230 VAC 851-870 Tx 806-825 Rx 5A @ 120 VAC or 3A @ 230 VAC VDC 13.8 13.8 26.4 26.4 2 2 12/8 0.5 2 2 12/8 0.5 2 2 12/8 0.5 VHF UHF 800 136-174 110 50 380-512 100 50 851-870 100 50 -36 ±1.0 -36 ±1.0 -36 ±1.0 0 to ±5 0 to ±2.5 NA -55 12.5/25/30 0 to ±5 0 to ±2.5 NA -55 12.5/25 0 to ±5 NA 0 to ±4 -55 25 12.5 (NPSPAC) 6.25 0.5 Synthesizer Step Size (kHz) 1.25 1.25 Frequency Spread Full Spec (MHz) 2 2 Audio Distortion (@ 1 kHz): Less than 3% Number of Channels (Conventional): Up to 12 Audio Response (pre-emphasis): Within +1/-3 dB of 6 dB/octave, 300 to 3000 Hz per EIA NOTE: Rated power output is measured at the transmitter power amplifier output connector per FCC Type Acceptance filing information. Any customer-required optional items such as power measuring devices and/or duplexers will introduce loss between the transmitter output connector and the station cabinet output connector. This loss will reduce the available power at the station connector. MIC DSP PORT POWER MODULE Station Power Humidity (EIA): Input Power Source: Optional Input Power Source: Standby Battery Source: Antenna Connections: Length of AC Power Cable: Metering: Altitude: Operable: Shippable: 1W @ 8 Transistorized Dynamic Transmit/Receive - 100% Transmitter (All specifications measured per TIA/EIA-603 Procedure) ADVANCE DIGITAL CAPABLE SYSTEM MODULE Service Speaker: Service Microphone: Duty Cycle (EIA) Continuous: Ambient Temperature (or full spec performance per EIA): Source Power Drain AC Input Power DC Input Power (A) Tx Rx only Tx (full/half power) Rx only Additional Options TX SYNTHESIZER 37.0 (94) 21.5 (55) 18.25 (46) NOTE: One rack unit equals 1.75 inches. Stations occupy 6 rack units of cabinet space. 27 dB Frequency Range (MHz) Rated Power Output (W) RF Output Impedance () Conducted Spurious and Harmonic Emission (dBm) Frequency Stability (ppm) Modulation Deviation (kHz) Wideband Narrowband NPSPAC FM Noise (dB) Channel Spacing (kHz) Service Microphone Antenna Multicoupler 230V Power Supply Duplexer Antenna Relay (VHF/UHF) Combiner Isolator Squelch-Operated Relay Remote Controllers Battery Standby Battery Charger Gel Cell Battery Voice Guard Encryption Aegis™ Digital Switchable Channel Spacing INDOOR CABINET (Floor Mount) 37 in. 69 in. 83 in. CABINET Size [in. (cm)] Height Width Depth 600 -20 to +7 dBm ±3 dB @ 300-3000 Hz Secur-it Tone and Transmit Tone: Transmitted 2175 Hz Tone Level: Permissible Control Line Loss @2175 Hz: Audio (Receiver to Line) Audio Amplifier Input Impedance: Input Level: Output Impedance to Line: Output Level to Line Voice (1 kHz ref): Tone (1 kHz ref): Frequency Response: Hum and Noise, Noise Squelch: Tone Squelch: DC Control Control Currents: Line Loop Resistance (maximum): Technical specifications are subject to change without notice. Product sales are subject to applicable U.S. export control laws. Receiver (All specifications measured per TIA/EIA-603 Procedure) DC output ON DC output OFF 100-120 VAC, 50/60 HZ, 4 Amp MAX TOTAL AC POWER 27.2 VDC 13.6 VDC VHF One Conventional Channel Regulatory Data Frequency Range (MHz) Power Output (Adjustable) (W) FCC Type Acceptance Number Applicable FCC Rules 22, 90 90 Industry Canada Certification Number 3636B-0017 3636B-0038 Applicable Industry Canada Rules RSS-119 RSS-119 136-174 403-450 10-110 10-100 OWDTR-0032-E OWDTR-0038-E 450-512 10-100 OWDTR-0039-E 22, 90, 74 3636B-0039 806-870 10-100 OWDTR-0036-E 90 3636-194-215 CE Marking NTIA Certification Number JF-1208074 JF-1208074 RSS-119 Stations available in UHF that meet the following: ETS 300 086 ETS 300 219 ETS 300 113 RSS-119 NA (380-400, 403-425) NA NA UHF Frequency Range (MHz) 136-174 380-512 50 50 RF Input Impedance () Channel Spacing (kHz) 12.5/25/30 12.5/25 Synthesizer Step Size (kHz) 1.25 1.25 Sensitivity (dBm) EIA 12 dB SINAD -116 (0.35 V) -116 (0.35 V) Threshold Squelch (dBm) -119 (0.25 V) -119 (0.25 V) Selectivity EIA 2-Signal (dB) 12.5 kHz 75 75 25 kHz 85 85 30 kHz 90 NA Frequency Stability (ppm) ±1.0 ±1.0 Signal Displacement Bandwidth (kHz) 12.5:±1, 25/30:±2 12.5:±1, 25:±2 Intermodulation (dB) 12.5 kHz 75 75 25 kHz 80 80 30 kHz 80 NA Spurious and Image Rejection (dB) 90 90 Frequency Spread Full Specs. (MHz) 2.0 2.0 Audio Response (de-emphasis): Within +2/-8 dB of 6 dB/octave (@ Local Speaker), 300 to 3000 Hz per EIA Within +1/-3 dB of 6 dB/octave (@ Line Output), 300 to 3000 Hz per EIA Audio Output: 1 Watt at less than 3% distortion @ 1000 Hz, 25/30 kHz Channel 800 806-825 50 12.5 (NPSPAC)/25 6.25 -118 (0.28 V) -121 (0.18 V) 20 (NPSPAC) 85 NA ±1.0 25:±2 NA 80 NA 90 0.5 Technical specifications are subject to change without notice. Product sales are subject to applicable U.S. export control laws. Conventional Options and Accessories Programmable Options General Specifications Conventional Tone and DC Remote Controlled Stations Transmit Frequencies Receive Frequencies Channel Guard Digital and Tone Channel Guard Disable Repeater Disable Intercom Function DTMF Decode Morse Code ID Squelch Tail Elimination (STE) Carrier Control Timer Station Control DC Control Tone Control Repeater DC/Repeat Tone/Repeat 2- or 4-Wire Audio Scan Audio (Line to Transmitter) Line Terminating Impedance: Line Level (Adjustable): Frequency Response: Tone Control Function Tones: 1050,1150,1250,1350,1450, 1550,1650, 1750,1850,1950 and 2050 Hz 2175 Hz 20 dB Below Voice Weight (min) [(lb (kg)] Continuous Duty Packed, Domestic Shipping Number of Rack Units Max. Units w/Power Supply 10 K 1 V RMS (for 5 kHz Deviation) 600 +7 dBm (Adjustable) +7 dBm (Reference 7 dBm) +1 and -3 dB @ 300-3000 Hz -55 dB (Reference 7 dBm) -30 dB (Reference 7 dBm) -2.5, ±6, and ±11 mA 11 K (Includes 3K Termination) VOLUME RX SYNTHESIZER RX FRONT END RX IF 69.1 (175) 23.1 (59) 21.0 (53) 83.0 (211) 23.1 (59) 21.0 (53) 121 (55) 136 (62) 576 (261) 606 (275) 693 (315) 729 (331) 17 1 33 4 41 5 SQUELC H PA ALARM DATA PORT -22 to +140oF (-30 to +60oC) 90% @ 122oF (50oC) 120 VAC (±20%), 47-63 Hz 230 VAC (±15%), 47-63 Hz 26.4 VDC, 50 AHR (min.) Type N 10 ft (3048 mm) Provided through Handset or TQ0619 Software Up to 15,000 ft (4,570 m) Up to 50,000 ft (15,250 m) VHF UHF 800 Frequency Range (MHz) 136-174 380-512 5A @ 120 VAC or 3A @ 230 VAC 5A @ 120 VAC or 3A @ 230 VAC 851-870 Tx 806-825 Rx 5A @ 120 VAC or 3A @ 230 VAC VDC 13.8 13.8 26.4 26.4 2 2 12/8 0.5 2 2 12/8 0.5 2 2 12/8 0.5 VHF UHF 800 136-174 110 50 380-512 100 50 851-870 100 50 -36 ±1.0 -36 ±1.0 -36 ±1.0 0 to ±5 0 to ±2.5 NA -55 12.5/25/30 0 to ±5 0 to ±2.5 NA -55 12.5/25 0 to ±5 NA 0 to ±4 -55 25 12.5 (NPSPAC) 6.25 0.5 Synthesizer Step Size (kHz) 1.25 1.25 Frequency Spread Full Spec (MHz) 2 2 Audio Distortion (@ 1 kHz): Less than 3% Number of Channels (Conventional): Up to 12 Audio Response (pre-emphasis): Within +1/-3 dB of 6 dB/octave, 300 to 3000 Hz per EIA NOTE: Rated power output is measured at the transmitter power amplifier output connector per FCC Type Acceptance filing information. Any customer-required optional items such as power measuring devices and/or duplexers will introduce loss between the transmitter output connector and the station cabinet output connector. This loss will reduce the available power at the station connector. MIC DSP PORT POWER MODULE Station Power Humidity (EIA): Input Power Source: Optional Input Power Source: Standby Battery Source: Antenna Connections: Length of AC Power Cable: Metering: Altitude: Operable: Shippable: 1W @ 8 Transistorized Dynamic Transmit/Receive - 100% Transmitter (All specifications measured per TIA/EIA-603 Procedure) ADVANCE DIGITAL CAPABLE SYSTEM MODULE Service Speaker: Service Microphone: Duty Cycle (EIA) Continuous: Ambient Temperature (or full spec performance per EIA): Source Power Drain AC Input Power DC Input Power (A) Tx Rx only Tx (full/half power) Rx only Additional Options TX SYNTHESIZER 37.0 (94) 21.5 (55) 18.25 (46) NOTE: One rack unit equals 1.75 inches. Stations occupy 6 rack units of cabinet space. 27 dB Frequency Range (MHz) Rated Power Output (W) RF Output Impedance () Conducted Spurious and Harmonic Emission (dBm) Frequency Stability (ppm) Modulation Deviation (kHz) Wideband Narrowband NPSPAC FM Noise (dB) Channel Spacing (kHz) Service Microphone Antenna Multicoupler 230V Power Supply Duplexer Antenna Relay (VHF/UHF) Combiner Isolator Squelch-Operated Relay Remote Controllers Battery Standby Battery Charger Gel Cell Battery Voice Guard Encryption Aegis™ Digital Switchable Channel Spacing INDOOR CABINET (Floor Mount) 37 in. 69 in. 83 in. CABINET Size [in. (cm)] Height Width Depth 600 -20 to +7 dBm ±3 dB @ 300-3000 Hz Secur-it Tone and Transmit Tone: Transmitted 2175 Hz Tone Level: Permissible Control Line Loss @2175 Hz: Audio (Receiver to Line) Audio Amplifier Input Impedance: Input Level: Output Impedance to Line: Output Level to Line Voice (1 kHz ref): Tone (1 kHz ref): Frequency Response: Hum and Noise, Noise Squelch: Tone Squelch: DC Control Control Currents: Line Loop Resistance (maximum): Technical specifications are subject to change without notice. Product sales are subject to applicable U.S. export control laws. Receiver (All specifications measured per TIA/EIA-603 Procedure) DC output ON DC output OFF 100-120 VAC, 50/60 HZ, 4 Amp MAX TOTAL AC POWER 27.2 VDC 13.6 VDC VHF One Conventional Channel Regulatory Data Frequency Range (MHz) Power Output (Adjustable) (W) FCC Type Acceptance Number Applicable FCC Rules 22, 90 90 Industry Canada Certification Number 3636B-0017 3636B-0038 Applicable Industry Canada Rules RSS-119 RSS-119 136-174 403-450 10-110 10-100 OWDTR-0032-E OWDTR-0038-E 450-512 10-100 OWDTR-0039-E 22, 90, 74 3636B-0039 806-870 10-100 OWDTR-0036-E 90 3636-194-215 CE Marking NTIA Certification Number JF-1208074 JF-1208074 RSS-119 Stations available in UHF that meet the following: ETS 300 086 ETS 300 219 ETS 300 113 RSS-119 NA (380-400, 403-425) NA NA UHF Frequency Range (MHz) 136-174 380-512 50 50 RF Input Impedance () Channel Spacing (kHz) 12.5/25/30 12.5/25 Synthesizer Step Size (kHz) 1.25 1.25 Sensitivity (dBm) EIA 12 dB SINAD -116 (0.35 V) -116 (0.35 V) Threshold Squelch (dBm) -119 (0.25 V) -119 (0.25 V) Selectivity EIA 2-Signal (dB) 12.5 kHz 75 75 25 kHz 85 85 30 kHz 90 NA Frequency Stability (ppm) ±1.0 ±1.0 Signal Displacement Bandwidth (kHz) 12.5:±1, 25/30:±2 12.5:±1, 25:±2 Intermodulation (dB) 12.5 kHz 75 75 25 kHz 80 80 30 kHz 80 NA Spurious and Image Rejection (dB) 90 90 Frequency Spread Full Specs. (MHz) 2.0 2.0 Audio Response (de-emphasis): Within +2/-8 dB of 6 dB/octave (@ Local Speaker), 300 to 3000 Hz per EIA Within +1/-3 dB of 6 dB/octave (@ Line Output), 300 to 3000 Hz per EIA Audio Output: 1 Watt at less than 3% distortion @ 1000 Hz, 25/30 kHz Channel 800 806-825 50 12.5 (NPSPAC)/25 6.25 -118 (0.28 V) -121 (0.18 V) 20 (NPSPAC) 85 NA ±1.0 25:±2 NA 80 NA 90 0.5 Conventional MASTR® III Station VHF, UHF, 800 MHz The Conventional MASTR III Base Station provides A comprehensive array of control capabilities The latest in digital signal processing technology Fully shielded and removable modules, front-mounted controls, and remote diagnostics The Conventional MASTR III provides the flexibility to change system setup as necessary. Whether users are designing a system, programming radio functions, or arranging an installation site, MASTR III keeps pace with their needs. Flexible, Efficient Design The microprocessorcontrolled, PC programmable options provide flexibility, simplified setup, and easy field upgrades. The fully synthesized design of the MASTR III Base Station allows the user to make frequency changes Public Safety and Professional Communications | www.pspc.harris.com 221 Jefferson Ridge Parkway | Lynchburg, VA USA 24501 | 1-800-368-3277 (+1-434-455-6403) Harris, assuredcommunications, and MASTR are registered trademarks of Harris Corporation. Aegis is a trademark of Harris Corporation. Copyright 2012 Harris Corporation. All rights reserved. Printed in U.S.A. 01/12 ECR-5778W quickly, easily, and affordably. In addition, the MASTR III can operate in either a wideband (25 kHz) or narrowband (12.5 kHz) mode. The modular design of the MASTR III Base Station makes maintenance and servicing simple and fast. Each module furnishes easyto-read indications of proper operation. Equipment is available in 37-inch, 69-inch, or 83-inch cabinets or an 86-inch open rack. Backward Compatible The MASTR III Base Station can be used in combination with MASTR II or IIe stations. The MASTR III is readily upgradeable through software revisions.