PA1110 1800-2000 MHz. Ultra Linear Power Amplifier Features (typical values) High Output Power ............................. +33.0 dBm. High IP3 .............................................. +50.0 dBm. Low NF ...................................................... 3.2 dB. Low Cost Electrical Specifications Parame te r Typical Value (Referenced to 50 ohms) Typical Performance @ 25C M in. Value M ax. Value Units 1800 2000 MHz. G a in (d B ) v s . F r e q u e n c y Frequency Gain 10.0 8. 5 dB. 1 0 .2 10 9 .8 Gain Flatness Reverse Isolation ±0 . 3 dB. 15 dB. 1800 1900 2000 N F (d B ) v s . F re q u e n c y 3 .5 Pout @ 1dB. comp. 33.0 Noise Figure 3. 5 32. 0 dBm. 4.0 IP3 (two tone) +50.0 +46.0 VSWR (Input/Output) 2.0:1 2.5:1 +10/725 +10/775 dB. 3 2 .5 1800 1900 2000 dBm. P o u t (d B m ) v s . F re q u e n c y Supply Req'd 34 v./mA. 33 32 IP3 measured with 2 tones @+20dBm. per tone Min and max values from 0 to 85 degrees C 1800 1900 2000 V S W R v s . F re q u e n c y In O ut 2 .5 2 1 .5 1 Outline Drawings 1800 1900 2000 IP 3 (d B m ) v s . F re q u e n c y 52 51 50 49 48 1800 1900 2000 F re q u e n c y in M H z . Maximum Ratings Storage Temperature ......... -40°C to +85°C DC Voltage .................................. +12 volts RF Input Power ........................... +28 dBm. Case Temperature ............................ +95°C Specifications subject to change without notice 100 Emlen Way Telford, Pa. 18969 Tel. (215) 723-6011 Fax. (215) 723-6015