2 Pad Glass Package Quartz Crystal, 1.5 mm x 4.1 mm Product Features: IL3Y Series Applications: Low Cost SMD Package RoHs Compliant Compatible with Leadfree Processing Real Time Clocks Metering Industrial Control Time Reference Frequency 32.768 KHz ESR (Equivalent Series Resistance) 70 KΩ Max. Shunt Capacitance (C0) 1.0 pF Typical Frequency Tolerance @ 25° C ±20 ppm Standard Frequency Stability over Temperature Parabolic -0.034 ppm / ° C Typical. Inflection point approx. 27° C See Graph Below Crystal Cut X-Cut Load Capacitance 12.5 pF Standard Drive Level 1 uW Max. Aging ±5 ppm Max. / Year Standard 2 Temperature Operating -40° C to +85° C Standard ( Storage -40° C to +85° C Standard ppm Typical X Cut Tem perature Coefficient 0 -30 -60 -90 -120 -150 -180 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 Tem perature Part Number Guide Package IL3Y - Sample Part Number: IL3Y - HX5F12.5 - 32.768 KHz Stability (ppm) at Room Temperature Stability (ppm) over Operating Temperature Operating Temperature Range H = ±20 ppm X = X Cut 5 = -40°C to +85°C ode (overtone) F = Fundamental Load Capacitance (pF) 12.5 pF Standard 6.0 pF Available ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 02/09 Specifications subject to change without notice Page 1 Frequency - 32.768 KHz 2 Pad Glass Package Quartz Crystal, 1.5 mm x 4.1 mm IL3Y Series Pb Free Solder Reflow Profile: Typical Circuit: *Units are backward compatible with 240C reflow processes Package Information: MSL = 2a Termination = e4 (Au over Ni over W base metal) Tape and Reel Information: Quantity per Reel A B C D E F 3000 12 +/-.3 8 +/-.2 5.5 +/-.2 13.5 +/-1 or 12 +/- 3 60 / 80 180 / 250 Environmental Specifications Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking Line 1: Frequency, Date Code ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 02/09 Specifications subject to change without notice Page 2