4 Pad Ceramic Package, 1.5 mm x 3.2 mm IL3X Series Product Features: Applications: r20 ppm Stability SMD Package Low Profile RoHS Compliant Compatible with Leadfree Processing Real Time Clocks Metering Industrial Control Time Reference Frequency 32.768 KHz ESR (Equivalent Series Resistance) 65 K: Max. Shunt Capacitance (C0) 1.7 pF Typical Frequency Tolerance @ 25q C r20 ppm Standard Frequency Stability over Temperature Parabolic -0.034 ppm / q C Typical. Inflection point approx. 27q C See Graph Below. Crystal Cut X-Cut Load Capacitance 12.5 pF Drive Level 1 uW Max. Aging r5 ppm Max. / Year 2 Temperature Operating -40q C to +85q C Standard Storage -40q C to +85q C Standard ppm Typical X Cut Tem perature Coefficient 0 -30 -60 -90 -120 -150 -180 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 Tem perature Part Number Guide Package IL3X - Sample Part Number: IL3X - HX5F12.5 - 32.768 KHz Stability (ppm) at Room Temperature Stability (ppm) over Operating Temperature Operating Temperature Range H = ±20 ppm X = X Cut 5 = -40°C to +85°C Mode (overtone) F = Fundamental Load Capacitance (pF) Frequency 12.5 pF - 32.768 KHz * [email protected]• www.ilsiamerica.com • www.ilsiamerica.com ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] 11/09_A Specifications subject to change without notice Page 1 4 Pad Ceramic Package, 1.5 mm x 3.2 mm IL3X Series Pb Free Solder Reflow Profile: Typical Circuit: *Units are backward compatible with 240C reflow processes Package Information: MSL = N/A Termination = e4 (Au over Ni over W base metal) Tape and Reel Information: Quantity per Reel A B C D E F 3000 12 +/-.3 8 +/-.2 5.5 +/-.2 13.5 +/-1 or 12 +/- 3 60 / 80 180 / 250 Environmental Specifications Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking Line 1: Factory Designator, Date Code (yww) [email protected]• www.ilsiamerica.com • www.ilsiamerica.com ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] 11/09_A Specifications subject to change without notice Page 2