G5016 Global Mixed-mode Technology Dual Ultra-Low On-Resistance Load Switch with Controlled Turn-On Features General Description The G5016 is dual N-channel MOSFET power switch designed for high-side load-switching applications, and the device has a typical RDS(ON) of 16mΩ and the output current is limited to 6A. Each switch is independently controlled by an on/off input (EN1, EN2), which is capable of interfacing directly with low-voltage GPIO control signals. Integrated Dual Channel Load Switch Input Voltage Range: 0.8V to 5.5V Dual Ultra-low ON-Resistance (16mΩ) 6A Continuous Switch Current per channel Low Threshold Control Inputs Adjustable Slew-rate Control Quick Output Discharge Transistor 14 Pin TDFN Package with Thermal Pad In the G5016, a 250Ω on-chip load resistor is added for quick output discharge (QOD) when the switch is turned off. The rise time of the device is internally controlled in order to avoid in-rush current and can be adjusted using a ceramic capacitor on the CTx pins. Applications Notebooks / Netbooks Tablet PCs Consumer Electronics Set-Top-Boxes Industrial Systems Telecom Systems The G5016 is available in 14 pin TDFN package. Ordering Information ORDER NUMBER MARKING G5016KD1U 5016 TEMP. RANGE -40°C to 85°C PACKAGE (Green) TDFN2X3-14 Note: KD: TDFN2X3-14 1: Bonding Code U: Tape & Reel Pin Configuration Typical Application Circuit G5016 VIN1 10uF IN1 IN1 1 14 OUT1 CT1 IN1 2 13 OUT1 EN1 EN1 3 12 CT1 EN2 4 11 GND EN2 5 10 CT2 IN2 6 9 OUT2 IN2 7 8 OUT2 VBIAS control VBIAS 1uF driver OUT1 GND Charge pump OUT2 driver CT2 IN2 VIN2 10uF TDFN2x3-14 TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.1 Aug 01, 2013 1