CHAPTER 4 DRAWINGS Tray Drawings Carrier Tape

 Chapter 4 Drawings
CHAPTER 4 DRAWINGS
Tray Drawings
Carrier Tape Drawings
Tube Drawings
Packages and Packing Methodologies Handbook
23 Aug 2013
4-1
 Chapter 4 Drawings
TRAY DRAWINGS
Dimensional drawings are available for each tray used in the shipment of Spansion products and
are found beginning on page 4-3.
Consult your Spansion sales representative for additional information about the trays used with
Spansion products.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-2
 Chapter 4 Drawings
Plastic Quad Flat Package: PQR 080 (sheet 1 of 2)
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-3
 Chapter 4 Drawings
Plastic Quad Flat Package: PQR 080 (sheet 2 of 2)
Notes:
1 All dimensions are in millimeters
Packages and Packing Methodologies Handbook
23 Aug 2013
4-4
 Chapter 4 Drawings
Shrink Small Outline Package: SSO 056 (sheet 1 of 2)
(322.6)
2.54 R.
4 PLACES
* 315.0
VACUUM PICKUP CELLS
8 PLACES
6.35 *
X
Y
7.62
Z
(4 CENTER CELLS, 4 SIDE CELLS)
SEE DETAIL "E"
X
X
105.90
±0.25
135.9*
92.1
* 21.18
B
12.7
*
25.70
15.00
16.15
CHAMFER
3.0X45˚
SEE DETAIL "D"
*
SEE DETAIL "F"
Y
SEE DETAIL "B"
*
SEE DETAIL "C"
1.6 R.
3 PLACES
282.70 ±0.25
C
*
SEE DETAIL "H"
0.76
A
8XR2.54 MAX
SEE DETAIL "I"
2.54
255.3
0.20 M A X M
* 311.15
+0.25
-0.13
0.20 M A Z M
25.4
34.3
R4.75
* 132.08
+0.25
-0.13
0.80
BOTTOM VIEW
DETAIL "D"
DETAIL "C"
+0.25
-0.13
* 311.66
+0.25
-0.13
* 132.59
0.20 M A X M
0.20 M A Z M
SECTION "X-X"
SECTION "Y-Y"
TRAY STACKING DETAIL
7˚
2.90
30˚
SSOP
56LD
XXXXXXX
7˚
DETAIL "H"
ITEM
NO.
DETAIL "I"
*
REVISION
LETTER
3468a \ 26254d
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-5
 Chapter 4 Drawings
Shrink Small Outline Package: SSO 056 (sheet 2 of 2)
0.50 M A B C
0.50 M A B C
* 23.84 }0.076
*
23.76M+3A1BE0.076
B
13.30 }0.076
*
0.50 M A B C
A
A
*
13.315 }0.076
0.50 M A B C
B
TOP VIEW
DETAIL "B"
BOTTOM VIEW
DETAIL "B"
RECYCLING LOGO
150˚C MAX
TEMPERATURE
RATING BLOCK
12G-56LD-G19
MPPO
7
TRAY MADE IN KOREA
DAEWON PART NO.
DETAIL "F"
DAEWON
SSOP 56LD
DETAIL "E"
25.70
*
3.8
2.5
2.0
SEE DETAIL "J"
1.50
0.20 ±0.10
23.84±0.076+5˚/S
0.50 M A B C
40˚
0.80
2.90
7.62
3.5
6.35
40˚
2.14
0.20
1.3
0.87
1.40
16.80-10˚/S
1.20
+1.5˚/S
1.67
*
0.50 M A B C
*
0.20
23.76±0.076+15˚/S
SECTION "A-A"
1.22
±0.10
0.35
1.15
30˚
0.50 M A B C
13.30±0.076
11.00
+3ß/S
SEE DETAIL "K"
16.57-5˚/S
1.30
1.50
1.00 ±0.10
25˚
1.86
-5˚/S
DETAIL "J"
0.35
7˚
4.70
0.50 M A B C
* 13.315\±0.076
14.70+30˚/S
SECTION "B-B"
15˚
2.14
1.22
±0.10
0.87
DETAIL "K"
3468b \ 26254d
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-6
 Chapter 4 Drawings
Small Outline Package: SOA 008 (sheet 1 of 2)
w3669 / f29362c / 1.3.8
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-7
 Chapter 4 Drawings
Small Outline Package: SOA 008 (sheet 2 of 2)
w3669 / f29362c / 1.3.8
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-8
 Chapter 4 Drawings
Small Outline Package: SOC 008 (sheet 1 of 2)
w3670 / f29363a / 1.3.8
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-9
 Chapter 4 Drawings
Small Outline Package: SOC 008 (sheet 2 of 2)
w3670 / f29363a / 1.3.8
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-10
 Chapter 4 Drawings
Small Outline Package: SO 044 (sheet 1 of 2)
g1054.1/f27455/12.13.11
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-11
 Chapter 4 Drawings
Small Outline Package: SO 044 (sheet 2 of 2)
g1054.2/f27455/12.13.11
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-12
 Chapter 4 Drawings
Small Outline Package: SL3 016, SO3 016, SS3 016 (sheet 1 of 2)
g1053.1/f29364/12.13.11
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-13
 Chapter 4 Drawings
Small Outline Package: SL3 016, SO3 016, SS3 016 (sheet 2 of 2)
g1053.2/f29364/12.13.11
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-14
 Chapter 4 Drawings
Thin Small Outline Package: TS, TSR 032 (Type 1) (sheet 1 of 2)
3592-1 / 24112j / 8.24.6
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-15
 Chapter 4 Drawings
Thin Small Outline Package: TS, TSR 032 (Type 1) (sheet 2 of 2)
3592-2 / 24112j / 8.24.6
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-16
 Chapter 4 Drawings
Thin Small Outline Package: TS, TSR 040 (Type 1) (sheet 1 of 2)
3593-1 / 25355i / 8.24.6
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-17
 Chapter 4 Drawings
Thin Small Outline Package: TS, TSR 040 (Type 1) (sheet 2 of 2)
3593-2 / 25355i / 8.24.6
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-18
 Chapter 4 Drawings
Thin Small Outline Package: T2, T2R 044 (040) (Type 2) (sheet 1 of 2)
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-19
 Chapter 4 Drawings
Thin Small Outline Package: T2, T2R 044 (040) (Type 2) (sheet 2 of 2)
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-20
 Chapter 4 Drawings
Thin Small Outline Package: T2A 050 (Type 2) (sheet 1 of 2)
3573-1 / 29371a
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-21
 Chapter 4 Drawings
Thin Small Outline Package: T2A 050 (Type 2) (sheet 2 of 2)
3573-2 / 29371a
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-22
 Chapter 4 Drawings
Thin Small Outline Package: TS, TSR, TS2 048 (Type 1) (sheet 1 of 2)
3595-1 / 24607i / 8.24.6
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-23
 Chapter 4 Drawings
Thin Small Outline Package: TS, TSR, TS2 048 (Type 1) (sheet 2 of 2)
3595-2 / 24607i / 8.24.6
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-24
 Chapter 4 Drawings
Thin Small Outline Package: TS, TSR 056 (Type 1) (sheet 1 of 2)
3594-1 / 25993f / 8.24.6
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-25
 Chapter 4 Drawings
Thin Small Outline Package: TS, TSR 056 (Type 1) (sheet 2 of 2)
3594-2 / 25993f / 8.24.6
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-26
 Chapter 4 Drawings
Ultra Thin Small Outline No Lead Package: UNE 008 (sheet 1 of 2)
3535 \ 28809b \ 1.5.5
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-27
 Chapter 4 Drawings
Ultra Thin Small Outline No Lead Package: UNE 008 (sheet 2 of 2)
3535 \ 28809b \ 1.5.5
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-28
 Chapter 4 Drawings
Very Very Thin Small Outline No Lead Package: WND 008 (sheet 1 of 2)
3535 \ 28809b \ 1.5.5
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-29
 Chapter 4 Drawings
Very Very Thin Small Outline No Lead Package: WND 008 (sheet 2 of 2)
3535 \ 28809b \ 1.5.5
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-30
 Chapter 4 Drawings
Very Very Thin Small Outline No Lead Package: WNF 008, WNG008, WNH 008 (sheet 1 of 2)
(322.6)
2.54 R.
4 PLACES
* 315.0
VACCUM PICKUP CELLS
14 PLACES
Y
(12 CENTER CELLS, 2 SIDE CELLS)
CLOSED CELLS
2 PLACES
6.35
SEE
DETAIL "D"
X
BUMPS
12 PLACES
*
7.62
Z
SEE DETAIL "E"
X
X
115.2
±0.25
*
135.9
*
92.1
9.60
B
12.7
*
SEE DETAIL "B"
10.35
CHAMFER
3.0X45M+3A1C6
12.50
SEE DETAIL "C"
*
11.60
SEE DETAIL "F"
Y
*
1.6 R.
3 PLACES
290.0±0.25
C
*
0.76
8XR2.54 MAX
SEE DETAIL "H"
A
SEE DETAIL "G"
2.54
25.4
255.3
R4.75
0.20 M A Z M
0.20 M A X M
*311.15
* 132.08
+0.25
-0.13
+0.25
-0.13
+0.25
-0.13
* 311.66
+0.25
-0.13
132.59
*
0.762
DETAIL "C"
FBGA
SECTION "Y-Y"
SECTION "X-X"
TRAY STACKING DETAIL
MALE
6X8
*
XXXXXXX
0.20 M A Z M
0.20 M A X M
FEMALE
34.3
FEMALE
ITEM
NO.
REVISION
LETTER
DETAIL "G"
MALE
7˚
3.11
30˚
7˚
"X" DIRECTION
"Y" DIRECTION
SLIP-LOCK DETAILS
DETAIL "D"
Notes:
DETAIL "H"
3466a \ 26022i
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-31
 Chapter 4 Drawings
Very Very Thin Small Outline No Lead Package: WNF 008, WNG 008, WNH 008 (sheet 2 of 2)
* 8.40±0.10
* 8.40±0.10
0.50 M A B C
0.50 M A B C
B
0.50 M A B C
* 6.40
±0.10
A
A
40˚
* 6.40
±0.10
0.72
0.50 M A B C
B
TOP VIEW
DETAIL "B"
3.20
-5˚/S
BOTTOM VIEW
DETAIL "B"
DAEWON
3.20
-5˚/S
DETAIL "I"
FBGA 6X8/FGA/FBA 48
DETAIL "E"
RECYCLING LOGO
150˚C MAX
7
1.05
12B-0608-F19
MPPO
TRAY MADE IN KOREA
30˚
TEMPERATURE
RATING BLOCK
DETAIL "F"
9.87
-40˚/S
0.50 M A B C
3.8
2.5
8.40
±0.10
6.70
±0.10
DETAIL "J"
DAEWON PART NO.
3.90
-10˚/S
40˚
1.80
+10˚/S
SEE DETAIL "I"
1.52
2.0
0.72
3.11
7.62
3.5
6.35
4.51
*
3.20
-5˚/S
1.3
2.50
+10˚/S
1.40
1.67
5.60
-10˚/S
0.50 M A B C
0.15
SEE DETAIL "J"
DETAIL "K"
2.20
-10˚/S
7.87
-40˚/S
* 8.40
±0.10
9.12
-30˚/S
SECTION "A-A"
1.20
0.50 M A B C
* 6.40
±0.10
5.25
±0.10
1.50
+10˚/S
1.80
-7˚/S
SEE DETAIL "K"
1.52
3.20
-5˚/S
3.11
1.05
4.51
1.50
+10˚/S
4.40
-10˚/S
30˚
DETAIL "L"
0.50 M A B C
* 6.40
±0.10
7.07
-30˚/S
1.20
0.15
SEE DETAIL "L"
2.50
-10˚/S
SECTION "B-B"
3466b \ 26022i
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-32
 Chapter 4 Drawings
Very Thin Quad Flat No Lead Package: VQA 024 (sheet 1 of 2)
3625-1 / 27575a / 1.29.7
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-33
 Chapter 4 Drawings
Very Thin Quad Flat No Lead Package: VQA 024 (sheet 2 of 2)
3625-2 / 27575a / 1.29.7
Notes:
1 All dimensions are in millimeters
Packages and Packing Methodologies Handbook
23 Aug 2013
4-34
 Chapter 4 Drawings
LAND GRID ARRAY: L1A 140, L2A 140, L3A 140, L4A 140 (sheet 1 of 1)
315.0
*
*
*
*
*
*
2.00
**
*
*
*
*
*
*
g1047.1/f30975/11.27.11
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-35
 Chapter 4 Drawings
Ball Grid Array: FAA 064 (sheet 1 of 2)
(322.6)
315.0 *
2.54 R.
4 PLACES
VACUUM PICKUP CELLS
10 PLACES
(6 CENTER CELLS, 4 SIDE CELLS)
5.62*
X
7.62
SEE
DETAIL "D" Z
Y
SEE DETAIL "E"
X
X
112.0 135.9*
±0.25
92.1
* 16.00
B
12.7
* 11.95
CHAMFER
3.0X45˚
*
0.76
A
18.10 *
SEE DETAIL "B"
1.6 R.
3 PLACES
SEE DETAIL "C"
12.70 *
C
SEE
DETAIL "F"
Y
289.6 ±0.25
SEE DETAIL "H"
8XR2.54 MAX
SEE DETAIL "I"
2.54
255.3
25.4
34.3
NOTE:
1. VACUUM PICKUP CELLS 10 PLACES
0.20 M A X M
3417-1a \ 27458b
FEMALE
0.20 M A Z M
*
MALE
132.08 *
311.15
+0.25
-0.13
+0.25
-0.13
+0.25
-0.13
* 311.66
+0.25
-0.13
*
132.59
0.20 M A X M
0.20 M A Z M
SLIP-LOCK DETAILS
DETAIL "D"
SECTION "X-X"
SECTION "Y-Y"
TRAY STACKING DETAIL
7˚
R4.75
3.11
30˚
FBGA
13X10
XXXXXXX
ITEM
NO.
REVISION
LETTER
*
DETAIL "I"
0.80
7˚
DETAIL "H"
DETAIL "C"
Notes:
3417-1b \ 27458b
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-36
 Chapter 4 Drawings
Ball Grid Array: FAA 064 (sheet 2 of 2)
*13.20 ±0.08
0.50 M A B C
B
A
*
A
13.20 ±0.08
0.50 M A B C
*10.20±0.08
0.50 M A B C
10.20±0.08 *
0.50 M A B C
4.90
-5˚/S
1.85
B
TOP VIEW
DETAIL "B"
BOTTOM VIEW
DETAIL "B"
1.05
40˚
DETAIL "K"
DAEWON
150˚C MAX
TEMPERATURE
RATING BLOCK
7
MAT'L NAME
FBGA 13X10/FAA 64/FSG 88
DETAIL "E"
14B-1310-C19
TRAY MADE IN KOREA
DAEWON
PART NO.
RECYCLING
LOGO
DETAIL "F"
0.50 M A B C
3.8
2.5
3.5 2.0
7.62
3417-2a \ 27458b
14.37
-40˚/S
* 13.20
±0.08
11.20
±0.08
40˚
SEE DETAIL "J"
3.60
+12˚/S
1.41
±0.10 0.61
5.62
3.11 4.51
0.80
1.3
1.40
1.67
0.50 M A B C
11.20
-10˚/S
* 13.20
±0.08
2.00
+10˚/S
8.20
-10˚/S
1.00
-10˚/S
14.73
-40˚/S
2.00 0.15
±0.10
SEE DETAIL "K"
4.90
-5˚/S
40˚
DETAIL "J"
0.80
SECTION "A-A"
5.80-5˚/S
0.50 M A B C
11.36
-40˚/S
10.20
*
±0.08
8.20
±0.08
0.90
-7˚/S
5.30
-12˚/S
1.80
+12˚/S
SEE
DETAIL "L"
1.41
±0.10 0.61
1.85
5.80-5˚/S
3.11 4.51
0.50 M A B C
8.20
-10˚/S
* 10.20
±0.08
11.73
-40˚/S
3.00
+10˚/S
SECTION "B-B"
2.00 0.15
±0.10
SEE
DETAIL "M"
DETAIL "L"
1.05
40˚
DETAIL "M"
3417-2b \ 27458b
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-37
 Chapter 4 Drawings
Ball Grid Array: FAB 024, FAC 024, ZSA 024, FBA 048, TLF 048, VBF048,
VBK 048 (sheet 1 of 2)
(322.6)
2.54 R.
4 PLACES
* 315.0
VACCUM PICKUP CELLS
14 PLACES
Y
(12 CENTER CELLS, 2 SIDE CELLS)
CLOSED CELLS
2 PLACES
6.35
SEE
DETAIL "D"
X
BUMPS
12 PLACES
*
7.62
Z
SEE DETAIL "E"
X
X
115.2
±0.25
*
135.9
*
92.1
9.60
B
12.7
*
SEE DETAIL "B"
10.35
CHAMFER
3.0X45M+3A1C6
12.50
SEE DETAIL "C"
*
11.60
SEE DETAIL "F"
Y
*
1.6 R.
3 PLACES
290.0±0.25
C
*
0.76
8XR2.54 MAX
SEE DETAIL "H"
A
SEE DETAIL "G"
2.54
25.4
255.3
R4.75
0.20 M A Z M
0.20 M A X M
*311.15
* 132.08
+0.25
-0.13
+0.25
-0.13
0.762
DETAIL "C"
+0.25
-0.13
+0.25
-0.13
* 132.59
* 311.66
FBGA
SECTION "Y-Y"
SECTION "X-X"
TRAY STACKING DETAIL
MALE
6X8
*
XXXXXXX
0.20 M A Z M
0.20 M A X M
FEMALE
34.3
FEMALE
ITEM
NO.
REVISION
LETTER
DETAIL "G"
MALE
7˚
3.11
30˚
7˚
"X" DIRECTION
"Y" DIRECTION
SLIP-LOCK DETAILS
DETAIL "D"
Notes:
DETAIL "H"
3466a \ 26022i
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-38
 Chapter 4 Drawings
Ball Grid Array: FAB 024, FAC 024, ZSA 024, FBA 048, TLF 048, VBF048,
VBK 048 (sheet 2 of 2)
* 8.40±0.10
* 8.40±0.10
0.50 M A B C
0.50 M A B C
B
0.50 M A B C
* 6.40
±0.10
A
A
40˚
* 6.40
±0.10
0.72
0.50 M A B C
B
TOP VIEW
DETAIL "B"
3.20
-5˚/S
BOTTOM VIEW
DETAIL "B"
DAEWON
3.20
-5˚/S
DETAIL "I"
FBGA 6X8/FGA/FBA 48
DETAIL "E"
RECYCLING LOGO
150˚C MAX
7
1.05
12B-0608-F19
MPPO
TRAY MADE IN KOREA
30˚
TEMPERATURE
RATING BLOCK
DETAIL "F"
9.87
-40˚/S
0.50 M A B C
3.8
2.5
8.40
±0.10
6.70
±0.10
DETAIL "J"
DAEWON PART NO.
3.90
-10˚/S
40˚
1.80
+10˚/S
SEE DETAIL "I"
1.52
2.0
0.72
3.11
7.62
3.5
6.35
4.51
*
3.20
-5˚/S
1.3
2.50
+10˚/S
1.40
1.67
5.60
-10˚/S
0.50 M A B C
0.15
SEE DETAIL "J"
DETAIL "K"
2.20
-10˚/S
7.87
-40˚/S
* 8.40
±0.10
9.12
-30˚/S
SECTION "A-A"
1.20
0.50 M A B C
* 6.40
±0.10
5.25
±0.10
1.50
+10˚/S
1.80
-7˚/S
SEE DETAIL "K"
1.52
3.20
-5˚/S
3.11
1.05
4.51
1.50
+10˚/S
4.40
-10˚/S
30˚
DETAIL "L"
0.50 M A B C
* 6.40
±0.10
7.07
-30˚/S
1.20
0.15
SEE DETAIL "L"
2.50
-10˚/S
SECTION "B-B"
3466b \ 26022i
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-39
 Chapter 4 Drawings
Ball Grid Array: FBB 048 (sheet 1 of 2)
(322.6)
2.54 R.
4 PLACES
6.35 *
* 315.0
VACUUM PICKUP CELLS
18 PLACES
(16 CENTER CELLS, 2 SIDE CELLS)
SEE DETAIL "D"
X
7.62
CLOSED CELLS
8 PLACES
Y
Z
SEE DETAIL "E"
X
X
120.0
±0.25
135.9 *
92.1
*
8.00
B
12.7
*
SEE DETAIL "M"
7.95
11.00
CHAMFER
3.0X45˚
9.00
*
SEE DETAIL "B"
Y
SEE DETAIL "F"
SEE DETAIL "C"
1.6 R.
3 PLACES
*
297.0±0.25
C
*
0.76
A
8XR2.54 MAX
SEE DETAIL "H"
SEE DETAIL "G"
2.54
255.3
0.20 M A X M
MALE
0.20 M A Z M
311.15
+0.25
-0.13
132.08
+0.25
-0.13
+0.25
-0.13
311.66
+0.25
-0.13
132.59
0.20 M A X M
25.4
FEMALE
FEMALE
MALE
"X" DIRECTION
"Y" DIRECTION
SLIP-LOCK DETAILS
DETAIL "D"
0.20 M A Z M
SECTION "X-X"
SECTION "Y-Y"
TRAY STACKING DETAIL
FBGA
XXXXXXX
6X9
*
ITEM NO.
DETAIL "G"
R4.75
7˚
REVISION
LETTER
4.51
30˚
7˚
0.762
INTERLOCKING DETAILS
BOTTOM VIEW
DETAIL "M"
34.3
DETAIL "H"
DETAIL "C"
Notes:
3476a \ 26040h
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-40
 Chapter 4 Drawings
Ball Grid Array: FBB 048 (sheet 2 of 2)
* 9.20
0.50 M A B C
0.50 M A B C
±0.10
B
*9.20
±0.10
7.25
±0.10
0.50 M A B C
* 6.20
±0.10
A
0.90
A
5.10
±0.10
B
1.80
-15˚
* 6.20
DETAIL "J"
±0.10
0.50 M A B C
20˚
TOP VIEW
DETAIL "B"
BOTTOM VIEW
DETAIL "B"
DAEWON
0.40
FBGA 6X9 / FGB 48
0.25
RECYCLING LOGO
DETAIL "E"
150˚C MAX
TEMPERATURE
RATING BLOCK
0.50 M A B C
3.8
1.80
-15˚
12B-0609-F19
MPPO
DETAIL "I"
TRAY MADE IN KOREA
DAEWON PART NO.
DETAIL "F"
10.11
-20˚/S
* 9.20
±0.10
2.5
2.0
7.62
7
20˚
7.25
±0.10
SEE DETAIL "I"
3.75
+10˚/S
1.52
0.65
1.27
3.5
0.25
6.35
3.11
4.51
1.3
1.05
1.40
1.67
0.50 M A B C
SECTION "A-A"
* 9.20
±0.10
9.68
-15˚
0.15
1.80
-15˚/S
SEE DETAIL "J"
5.00
-10˚/S
0.50 M A B C
7.11
-20˚/S
* 6.20
±0.10
3.00
-10˚/S
DETAIL "K"
1.50
+10˚/S
5.10
±0.10
SEE DETAIL "K"
1.52
1.27
0.90
3.11
1.80
-15˚/S
0.50 M A B C
DETAIL "L"
* 6.20
±0.10
6.68
-15˚
3.00
-15˚/S
1.05
4.51
0.15
SEE DETAIL "L"
SECTION "B-B"
3467b \ 26040h
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-41
 Chapter 4 Drawings
Ball Grid Array: FBC 048, VBD 064, VBJ 064 (sheet 1 of 2)
322.6 REF.
2.54 R.
4 PLACES
6.35*
315.0*
VACUUM PICKUP CELLS
18 PLACES
(16 CENTER CELLS, 2 SIDE CELLS)
SEE DETAIL "D"
X
Y
CLOSED CELLS
8 PLACES
7.62
Z
SEE DETAIL "E"
X
X
119.9
±0.25
135.9*
92.1
* 10.90
B
12.7
SEE DETAIL "M"
* 8.00
11.00 *
CHAMFER
3.0X45˚
SEE DETAIL "B"
Y
SEE DETAIL "F"
SEE DETAIL "C"
1.6 R.
3 PLACES
9.00 *
297.0±0.25
*
0.76
A
C
SEE DETAIL "H"
8X2.54 MAX
SEE DETAIL "G"
2.54
255.3
25.4
34.3
3410 \ 26048i
0.20 M A X M
0.20 M A Z M
311.15 *
+0.25
-0.13
132.08 *
+0.25
-0.13
R4.75
0.762
+0.25
-0.13
132.59 *
+0.25
-0.13
311.66 *
DETAIL "C"
FEMALE
MALE
0.20 M A Z M
0.20 M A X M
SECTION "Y-Y"
SECTION "X-X"
TRAY STACKING DETAIL
SLIP-LOCK DETAILS
DETAIL "D"
7˚
4.51
30˚
7˚
DETAIL "H"
Notes:
BOTTOM VIEW
DETAIL "M"
3410-1b \ 26048i
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-42
 Chapter 4 Drawings
Ball Grid Array: FBC 048, VBD 64, VBJ 064 (sheet 2 of 2)
*
9.20
±0.10
0.50 M A B C
9.20 *
±0.10
B
20˚
0.50 M A B C
0.65
0.50 M A B C
*
8.20 *
±0.10
2.70
-15˚/S
A
A
0.90
DETAIL "K"
8.20 *
}0.10
1.80
-15˚S
DETAIL "J"
0.50 M A B C
15˚
B
TOP VIEW
DETAIL "B"
5.00
-10˚S
9.11
-20˚/S
0.50 M A B C
BOTTOM VIEW
DETAIL "B"
1.50
+10˚S
8.20 *
±0.10
20˚
0.90
0.40
SEE DETAIL "K"
1.52
1.27
0.25
2.70
-15˚
3.11
0.50 M A B C
5.00
-10˚S
8.20 *
±0.10
1.05
1.80
-15˚S
DETAIL "L"
4.51
DETAIL "I"
0.15
SEE DETAIL "L"
8.68
-15˚/S
SECTION "B-B"
3410-2a \ 26048i
10.11
-20˚/S
0.50 M A B C
3.8
7.25
-10˚/S
* 9.20
±0.10
7.62
SEE DETAIL "I"
3.75
+10˚/S
2.5
2.0
1.52
1.27
3.5
6.35
3.11
4.51
1.3
1.05
1.40
1.67
0.50 M A B C
5.00
-7˚/S
9.20 *
±0.10
9.68
-15˚/S
0.15
SEE DETAIL "J"
FBGA
XXXXXXX
8X9
ITEM
NO.
SECTION "A-A"
*
REVISION
LETTER
DETAIL "G"
DAEWON
FBGA 8X9 / FGC/FBC 48
DETAIL "E"
150˚C MAX
TEMPERATURE
RATING BLOCK
7
MPPO
RECYCLING
LOGO
DETAIL "F"
12B-0809-F19
TRAY MADE IN KOREA
DAEWON
PART NO.
3410-2b \ 26048i
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-43
 Chapter 4 Drawings
Ball Grid Array: FBD 048 (sheet 1 of 2)
3175-1b \ 04-26913
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-44
 Chapter 4 Drawings
Ball Grid Array: FBD 048 (sheet 2 of 2)
3175-2 \
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-45
 Chapter 4 Drawings
Ball Grid Array: FBD 063 (sheet 1 of 2)
322.6 REF.
2.54 R.
4 PLACES
*315.0
VACUUM PICKUP CELLS
8 PLACES
(6 CENTER CELLS, 2 SIDE CELLS)
Y
SEE
DETAIL "D"
X
CLOSED CELLS
2 PLACES
6.35 *
Z
7.62
SEE DETAIL "E"
X
X
119.5
±0.25
135.9*
92.1
* 11.95
B
*
SEE DETAIL "C"
SEE DETAIL "B"
8.20
17.20 *
CHAMFER
3.0X45˚
SEE
DETAIL "F"
Y
12.7
1.6 R.
3 PLACES
11.30 *
292.4±0.25
C
8X2.54
MAX
SEE DETAIL H
0.76 *
A
SEE DETAIL G
255.3
NOTE:
1
2.54
25.4
34.3
VACUUM PICKUP CELL 8 PLACES
0.20 M A Z M
0.20 M A X M
311.15
3412-1a \ 26396f
*
132.08
7˚
*
+0.25
-0.13
+0.25
-0.13
3.11
30˚
7˚
+0.25
-0.13
+0.25
-0.13
311.66
*
132.59
DETAIL "H"
*
0.20 M A Z M
0.20 M A X M
R4.75
SECTION "X-X"
SECTION "Y-Y"
TRAY STACKING DETAIL
MALE
FEMALE
MALE
FEMALE
0.762
DETAIL "C"
"X" DIRECTION
"Y" DIRECTION
SLIP-LOCK DETAILS
DETAIL "D"
Notes:
3412-1b \ 26396f
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-46
 Chapter 4 Drawings
Ball Grid Array: FBD 063 (sheet 2 of 2)
0.50 M A B C
*
14.15
±0.08
0.50 M A B C
*
14.15
±0.08
11.50
±0.08
B
0.50 M A B C
*
8.15
±0.08
A
A
8.15 *
±0.08
6.80
±0.08
10˚
0.50 M A B C
3.8
2.5
2.0
6.35
BOTTOM VIEW
DETAIL "B"
16.40
-10˚/S
0.50 M A B C
7.62
45˚
B
TOP VIEW
DETAIL "B"
14.15 *
±0.08
11.50
±0.08
10˚
SEE
DETAIL "I"
11.00
+10˚/S
3.11
2.61
1.71
0.91
3.05
-10˚/S
DETAIL "I"
3.5
1.3
1.40
1.67
0.50 M A B C
SEE
DETAIL "J"
10˚
DETAIL "J"
SECTION "A-A"
10.39
-10˚/S
8.15 *
±0.08
3412-2a \ 26396f
10˚
SEE
DETAIL "K"
5.00
+10˚/S
6.80
±0.08
0.40
14.15 *
±0.08
14.50
-10˚/S
0.50 M A B C
0.35
1.35
45˚
3.11
2.61
1.71
0.91
3.80
-10˚/S
DETAIL "K"
SEE
DETAIL "L"
0.50 M A B C
8.15 *
±0.08
8.50
-10˚/S
DAEWON
1.35
0.35
10˚
FBGA
XXXXXXX
SECTION "B-B"
ITEM
NO.
FBGA 8X14 / FBD63
8X14
DETAIL "G"
*
REVISION
LETTER
0.40
DETAIL "E"
7
150˚CMAX
TEMPERATURE
RATING BLOCK
RECYCLING
LOGO
DETAIL "F"
MPPO
12F-0814-D19
TRAY MADE IN KOREA
10˚
DETAIL "L"
DAEWON
PART NO.
3412-2b \ 26396f
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-47
 Chapter 4 Drawings
Ball Grid Array: FBE 040
(sheet 1 of 2)
g1040.1/f26635/11.27.11
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-48
 Chapter 4 Drawings
Ball Grid Array: FBE 040 (sheet 2 of 2)
g1040.2/f26635/11.27.11
Packages and Packing Methodologies Handbook
23 Aug 2013
4-49
 Chapter 4 Drawings
Ball Grid Array: FDD 047 (sheet 1 of 2)
g1041.1/f26636/11.27.11
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-50
 Chapter 4 Drawings
Ball Grid Array: FDD 047 (sheet 2 of 2)
g1041.2/f26636/11.27.11
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-51
 Chapter 4 Drawings
Ball Grid Array: UDA 048, VDG 048, RLG 052, RSE 052 (sheet 1 of 2)
3535 \ 28809b \ 1.5.5
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-52
 Chapter 4 Drawings
Ball Grid Array: UDA 048, VDG 048, RLG 052, RSE 052 (sheet 2 of 2)
3535 \ 28809b \ 1.5.5
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-53
 Chapter 4 Drawings
Ball Grid Array: VCA 056 (sheet 1 of 2)
g1043.1/f27570/11.27.11
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-54
 Chapter 4 Drawings
Ball Grid Array: VCA 056 (sheet 2 of 2)
g1043.2/f27570/11.27.11
Packages and Packing Methodologies Handbook
23 Aug 2013
4-55
 Chapter 4 Drawings
Ball Grid Array: FBE 063, FSA 063, FSD 063, FBE 080, VBC 080, FBF 084 (sheet 1 of 2)
(322.6)
2.54 R.
4 PLACES
315.0
VACUUN PICKUP CELLS
8 PLACES
*
X
(6 CENTER CELLS, 2 SIDE CELLS)
*
SEE DETAIL "D"
6.35
Z
7.62
BUMPS
11 PLACES
CLOSED CELLS
4 PLACES
Y
SEE DETAIL "E"
X
X
*
101.5
±0.25
*
14.50
*
17.20
135.9
92.1
B
CHAMFER
3.0X45˚
18.00
SEE DETAIL "F"
Y
*
*
12.7
SEE DETAIL "C"
SEE DETAIL "B"
15.50
1.6 R.
3 PLACES
279.0±0.25
C
*
0.76
SEE DETAIL H
A
SEE DETAIL G
2.54
255.3
25.4
0.50 M A B C
B
12.15
±0.10
34.3
0.50 M A B C
*
12.15
±0.10
*
* 11.15±0.10
0.50 M A B C
A
A
*0.5011.15±0.10
M A B C
9.80
B
FBGA 11x12
TOP VIEW
DETAIL "B"
BOTTOM VIEW
DETAIL "B"
*
XXXXXXX
ITEM NO.
DAEWON
DETAIL G
FBGA 11X12 / FBE63/80 FSA63 FBF84
REVISION
LETTER
RECYCLING LOGO
DETAIL E
125ßC BAKE / 140˚C MAX
TEMPERATURE
RATING BLOCK
DETAIL F
7
MPSU
12B-1112-D13
TRAY MADE IN KOREA
DAEWON PART NO.
3469a \ 26637c
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-56
 Chapter 4 Drawings
Ball Grid Array: FBE 063, FSA 063, FSD 063, FBE 080, VBC 080, FBF 084
(sheet 2 of 2)
13.53
-40˚/S
0.50 M A B C
3.8
*
40˚
5.40
-10˚/S
12.15
±0.10
SEE DETAIL "I"
3.00
+10˚/S
10.10
-7˚/S
2.5
2.0
1.66
1.45
±0.10
3.11
0.70
3.5
7.62
6.35
4.51
3.35
-5˚/S
1.3
1.40
1.30
±0.10
9.20
-10˚/S
1.67
0.50 M A B C
4.00
+10˚/S
12.15
*±0.10
DETAIL "I"
SEE DETAIL "J"
12.53
-40˚/S
13.03
-40˚/S
SECTION "A-A"
0.15
0.50 M A B C
3.80
+7˚/S
11.15
* ±0.10
8.80
-7˚/S
3.35
-5˚/S
SEE DETAIL "K"
4.00
+10˚/S
1.45
±0.10
3.11
4.51
0.50 M A B C
1.15
40˚
DETAIL "J"
SECTION "B-B"
0.20 M A X M
11.15
*±0.10
1.30
±0.10
0.15
SEE DETAIL "L"
5.40
-10˚/S
12.03
-40˚/S
0.20 M A Z M
*311.15
2.60
+10˚/S
R4.75
* 132.08
+0.25
-0.13
+0.25
-0.13
0.762
DETAIL "C"
+0.25
-0.13
* 311.66
*
0.20 M A X M
+0.25
-0.13
132.59
1.15
SECTION "Y-Y"
40˚
MALE
3.35
-5˚/S
0.20 M A Z M
SECTION "X-X"
FEMALE
SLIP-LOCK DETAILS
DETAIL "D"
0.70
7˚
40˚
4.51
30˚
DETAIL "L"
0.70
3.35
-5˚/S
DETAIL "K"
7˚
DETAIL "H"
3469b \ 26637c
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-57
 Chapter 4 Drawings
Ball Grid Array: NLD 044, RLA 044, VDE 044, VDJ 044, RLA 056, RSD 056 (sheet 1 of 2)
3648 \ f28384b \ 8.1.7
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-58
 Chapter 4 Drawings
Ball Grid Array: NLD 044, RLA 044, VDE 044, VDJ 044, RLA 056, RSD 056( sheet 2 of 2)
3648 \ f28384b \ 8.1.7
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-59
 Chapter 4 Drawings
Ball Grid Array: VBN 048, FMH 107 (sheet 1 of 2)
3574-1 / 28805c
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-60
 Chapter 4 Drawings
Ball Grid Array: VBN 048, FMH 107 (sheet 2 of 2)
3574-2 / 28805c
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-61
 Chapter 4 Drawings
Ball Grid Array: VDF 048, FMC 104 (sheet 1 of 2)
3575-1 / 28803a
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-62
 Chapter 4 Drawings
Ball Grid Array: VDF 048, FMC 104 (sheet 2 of 2)
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-63
 Chapter 4 Drawings
Ball Grid Array: VCC 056 (sheet 1 of 2)
g1048.1/f27771/12.4.11
Notes:
(See next page for detailed views)
All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-64
 Chapter 4 Drawings
Ball Grid Array: VCC 056 (sheet 2 of 2)
g1048.2/f27771/12.4.11
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-65
 Chapter 4 Drawings
Ball Grid Array: VBB 080, FTD 088, VBB 088 (sheet 1 of 2)
g1044.1/f27718/11.27.11
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-66
 Chapter 4 Drawings
Ball Grid Array: VBB 080, FTD 088, VBB 088 (sheet 2 of 2)
g1044.2/f27718/11.27.11
Packages and Packing Methodologies Handbook
23 Aug 2013
4-67
 Chapter 4 Drawings
Ball Grid Array: VBE 088, VBS 088 (sheet 1 of 2)
(322.6)
* 315.0
2.54 R.
4 PLACES
X
SEE DETAIL "D"
VACUUM PICKUP CELLS
14 PLACES
(12 CENTER CELLS, 2 SIDE CELLS)
Y
Z
5.62 *
7.62
SEE DETAIL "E"
X
X
115.2
±0.25
*
135.9
* 12.80
92.1
B
* 10.35
14.65
11.00
CHAMFER
3.0X45ß
*
SEE DETAIL "B"
SEE DETAIL "G"
Y
SEE DETAIL "F"
12.7
SEE DETAIL "C"
*
1.6 R.
3 PLACES
293.0 ±0.25
C
*
SEE DETAIL "H"
0.76
A
8XR2.54 MAX
SEE DETAIL "I"
2.54
255.3
0.20 M A X M
*
*
25.4
0.20 M A Z M
*
311.15
+0.25
-0.13
+0.25
-0.13
311.66
*
0.20 M A X M
R4.75
132.08
+0.25
-0.13
0.80
DETAIL "C"
+0.25
-0.13
132.59
0.20 M A Z M
SECTION "X-X"
SECTION "Y-Y"
TRAY STACKING DETAIL
FEMALE
34.3
BOTTOM VIEW
DETAIL "G"
7˚
MALE
3.11
30˚
FBGA
9.7 X 12
XXXXXXX
*
ITEM NO.
7˚
DETAIL "I"
REVISION
LETTER
DETAIL "H"
SLIP-LOCK DETAILS
DETAIL "D"
Notes:
3477a \ 27776c
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-68
 Chapter 4 Drawings
Ball Grid Array: VBE 088, VBS 088 (sheet 2 of 2)
*
B
*
12.15 ±0.08
12.15 ±0.08
0.50 M A B C
0.50 M A B C
*
9.85±0.08
0.50 M A B C
A
A
*
9.85±0.08
0.50 M A B C
2.50
-5˚/S
B
TOP VIEW
DETAIL "B"
BOTTOM VIEW
DETAIL "B"
0.90
DAEWON
1.50
FBGA 9.7 X 12 VBE 088
DETAIL "E"
RECYCLING LOGO
150˚C MAX
7
TEMPERATURE
RATING BLOCK
MPPO
20˚
14B-9712-F19
TRAY MADE IN KOREA
DETAIL "K"
DAEWON PART NO.
DETAIL "F"
13.00
-40˚/S
0.50 M A B C
*
40˚
12.15
±0.08
3.8
10.35
±0.08
2.5
3.5
SEE DETAIL "J"
3.00
+12˚/S
5.95
-7˚/S
1.39
±0.10
0.30
40˚
0.65
7.62
5.62
3.11
4.51
1.3
1.40
1.67
*
0.50 M A B C
12.15
±0.08
12.74
-20˚/S
SECTION "A-A"
0.50 M A B C
2.95
-5˚/S
2.50
-5˚/S
1.80 0.30
±0.10
1.80
+10˚/S
7.20
-10˚/S
10.15
-10˚/S
DETAIL "J"
SEE DETAIL "K"
10.70
-40˚/S
*
9.85
±0.08
8.05
±0.08
5.70
-12˚/S
1.55
+12˚/S
SEE DETAIL "L"
1.39
±0.10
0.30
1.50
7.85
-10˚/S
*
0.50 M A B C
20˚
DETAIL "M"
9.85
±0.08
10.44
-20˚/S
5.65
-10˚/S
3.00
+10˚/S
SECTION "B-B"
2.95
-5˚/S
DETAIL "L"
3.11
0.90
0.65
1.05
-7˚/S
4.51
1.80 0.30
±0.10
SEE DETAIL "M"
3477b \ 27776c
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-69
 Chapter 4 Drawings
Ball Grid Array: FLA 069, VBG 080, FEC 088, FEE 088, TLE 088, TSA 088, VBG 088,
VBL 088 (sheet 1 of 2)
(322.6)
2.54 R.
4 PLACES
* 315.0
VACUUM PICKUP CELLS
14 PLACES
SEE DETAIL "D"
X
Y
(12 CENTER CELLS, 2 SIDE CELLS)
6.35
*
7.62
BUMPS
11 PLACES
Z
SEE DETAIL "E"
X
X
7 8
5 6
5 6 7
08
Z 1
2 3
05
8 9 X
9
2 3 4
04
07
YZ 1
103.68
±0.25
4
03
06
1
135.9
*
92.1
*
11.52
B
12.7
*
SEE DETAIL "B"
16.11
14.52
CHAMFER
3.0X45˚
12.30
SEE DETAIL "C"
SEE DETAIL "F"
Y
*
1.6 R.
3 PLACES
*
290.4±0.25
C
*
SEE DETAIL "H"
0.76
A
8XR2.54 MAX
SEE DETAIL "G"
2.54
255.3
25.4
R4.75
0.20 M A Z M
0.20 M A X M
34.3
* 132.08
* 311.15
+0.25
-0.13
+0.25
-0.13
0.762
7˚
*
+0.25
-0.13
* 132.59
+0.25
-0.13
311.66
DETAIL "C"
3.11
30˚
0.20 M A Z M
0.20 M A X M
7˚
SECTION "Y-Y"
SECTION "X-X"
TRAY STACKING DETAIL
MALE
FEMALE
FEMALE
DETAIL "H"
MALE
FBGA
8X11
XXXXXXX
ITEM
NO.
*
REVISION
LETTER
DETAIL "G"
"X" DIRECTION
"Y" DIRECTION
SLIP-LOCK DETAILS
DETAIL "D"
Notes:
3470a \ 26715g
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-70
 Chapter 4 Drawings
Ball Grid Array: FLA 069, VBG 080, FEC 088, FEE 088, TLE 088, TSA 088, VBG 088,
VBL 088 (sheet 2 of 2)
*11.20 ±0.08
* 11.20 ±0.08
3.32
-5˚/S
0.50 M A B C
0.50 M A B C
0.70
* 8.20 ±0.08
0.50 M A B C
A
A
1.15
* 8.20 ±0.08
40˚
0.50 M A B C
40˚
DETAIL "J"
0.70
B
TOP VIEW
DETAIL "B"
BOTTOM VIEW
DETAIL "B"
DAEWON
FBGA 8X11 / VBG 88 /FLA 69
3.32
-5˚/S
RECYCLING LOGO
DETAIL "I"
DETAIL "E"
150ßC MAX
TEMPERATURE
RATING BLOCK
12B-0811-119
MPPO
7
TRAY MADE IN KOREA
DAEWON PART NO.
DETAIL "F"
12.58
-40˚/S
0.50 M A B C
3.8
3.32
-5˚/S
*11.20
4.80
-13˚/S
±0.08
9.70
±0.08
2.80
+13˚/S
2.5
2.25
2.0
SEE DETAIL "I"
1.45
±0.10
1.15
3.11
7.62
3.5
6.35
0.70
4.51
1.3
6.20
-15˚/S
3.20
+13˚/S
1.40
1.67
8.60
-10˚/S
*11.20
SECTION "A-A"
40˚
0.15
1.30
±0.10
DETAIL "L"
SEE DETAIL "J"
0.50 M A B C
±0.08
12.08
-40˚/S
0.50 M A B C
9.58
-40˚/S
2.40
+13˚/S
* 8.20
±0.08
40˚
SEE DETAIL "K"
4.64
-5˚/S
9.58
-40˚/S
2.25
1.45
±0.10
3.11
4.51
0.70
9.08
-40˚/S
5.80
-15˚/S
3.32
-5˚/S
DETAIL "K"
0.50 M A B C
1.80
+15˚/S
* 8.20
±0.08
9.08
-40˚/S
SECTION "B-B"
0.15
1.30
±0.10
SEE DETAIL "L"
3.80
-15˚/S
1.40
-15˚/S
3470b \ 26715g
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-71
 Chapter 4 Drawings
Ball Grid Array: TLA 064, TSB 064, VBH 064, TLA 067, FLB 073, FLJ 073, FMD 073,
FSB 073 FSC 073, FTA 073, TLA 073, FEB 084, FFB 084, FTA 084, TLA 084, TSB 084, TTA
084, VBH 084, VSA 084, FTA 088, FLB 093, TLA 093 (sheet 1 of 2)
(322.6)
2.54 R.
4 PLACES
*
315.0
Y
VACUUM PICKUP CELLS
10 PLACES
(8 CENTER CELLS, 2 SIDE CELLS)
SEE DETAIL "D"
X
BUMPS
10 PLACES
6.35 *
7.62
Z
SEE DETAIL "E"
X
X
115.20
±0.25
135.9
*
92.1
*
12.80
B
12.7
*
10.35
15.34
11.77
CHAMFER
3.0X45M+3A1C6
*
SEE DETAIL "G"
Y
SEE DETAIL "B"
*
SEE DETAIL "F"
SEE DETAIL "C"
1.6 R.
3 PLACES
291.46 ±0.25
C
*
SEE DETAIL "H"
0.76
A
8XR2.54 MAX
SEE DETAIL "I"
2.54
255.3
0.20 M A X M
*
25.4
0.20 M A Z M
*
311.15
+0.25
-0.13
34.3
R4.75
132.08
+0.25
-0.13
0.80
+0.25
-0.13
* 311.66
+0.25
-0.13
DETAIL "C"
* 132.59
0.20 M A X M
SECTION "X-X"
SECTION "Y-Y"
3.11
30˚
TRAY STACKING DETAIL
FEMALE
BOTTOM VIEW
DETAIL "G"
7˚
0.20 M A Z M
MALE
7˚
FBGA
XXXXXXX
ITEM NO.
SLIP-LOCK DETAILS
DETAIL "D"
Notes:
DETAIL "H"
8X11.6
*
REVISION
LETTER
DETAIL "I"
3472a \ 26946h
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-72
 Chapter 4 Drawings
Ball Grid Array: TLA 064, TSB 064, VBH 064, TLA 067, FLB 073, FLJ 073, FMD 073,
FSB 073 FSC 073, FTA 073, TLA 073, FEB 084, FFB 084, FTA 084, TLA 084, TSB 084, TTA
084, VBH 084, VSA 084, FTA 088, FLB 093, TLA 093 (sheet 2 of 2)
11.80
±0.08
B
*
3.54
-5˚/S
*
11.80
±0.08
0.50 M A B C
0.50 M A B C
0.65
*
1.15
8.20 ±0.08
0.50 M A B C
A
A
40˚
DETAIL "K"
7.50±0.08
*
40˚
0.50 M A B C
B
4.60
-5˚/S
TOP VIEW
DETAIL "B"
BOTTOM VIEW
DETAIL "B"
40˚
0.70
0.70
5.30
-12˚/S
1.15
DETAIL "L"
0.50
3.54
-5˚/S
40˚
DETAIL "M"
0.50 M A B C
3.8
*
11.80 ±0.08
SEE DETAIL "J"
4.00
+12˚/S
9.90
±0.08
2.5
2.0
DETAIL "J"
13.18
-40˚/S
1.45
±0.10
3.11
7.62
3.5
6.35
3.11 4.51
1.3
1.40
2.30
+10˚/S
9.80
-10M+3A1C6/S
1.67
0.50 M A B C
* ±0.08
11.80
12.75
-40˚/S
6.00
-10˚/S
1.30 0.15
±0.10
SEE DETAIL "K"
0.50 M A B C
9.59
-40˚/S
*
SECTION "A-A"
4.00
-12˚/S
1.80
+12˚/S
7.50
±0.08
SEE DETAIL "L"
1.45
±0.10
3.11
3.11 4.51
0.50 M A B C
DAEWON
6.20
-10˚/S
8.20
±0.08
2.40
+10˚/S
9.15
-40˚/S
FBGA 8X11.6/FLB/FSB/FSC/FTA73 FLB/FSC93
DETAIL "E"
*
1.30 0.15
±0.10
SEE DETAIL "M"
SECTION "B-B"
RECYCLING LOGO
150˚C MAX
TEMPERATURE
RATING BLOCK
7
MPPO
12B-8116-119
TRAY MADE IN KOREA
DAEWON PART NO.
DETAIL "F"
3472b \ 26946h
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-73
 Chapter 4 Drawings
Ball Grid Array: FLK 073, FMB 073, FTE 073, FVC 093, FMB 104, FFC 115, FFD 115,
FMB 115, FPB 115, FTE 115, FTL 115, BFA 188, BNB 188 (sheet 1 of 2)
3478 \ f27839b-opt2 \ 12-13-07
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-74
 Chapter 4 Drawings
Ball Grid Array: FLK 073, FMB 073, FTE 073, FVC 093, FMB 104, FFC 115, FFD 115,
FMB 115, FPB 115, FTE 115, FTL 115, BFA 188, BNB 188 (sheet 2 of 2)
3478 \ f27839b-opt2 \ 12-13-07
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-75
 Chapter 4 Drawings
Ball Grid Array: LAA 064, LSA 064, LSE 064, LIA 064, LSH 064, LSF 064, LSG 064,
LAA 080, LSB 080, MMB 112, FND 115, FTM 115, TMB 115, FIB 137, FJA 137, FMI 137, FND
137, FTM 137, FVE 137, FWC 137, FWD 137, TLK 137, TMB 137, T3A 137
VBP 137 (sheet 1 of 2)
3694 \ f27326 \ 5.21.8
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-76
 Chapter 4 Drawings
Ball Grid Array: LAA 064, LSA 064, LSE 064, LIA 064, LSH 064, LSF 064, LSG 064,
LAA 080, LSB 080, MMB 112, FND 115, FTM 115, TMB 115, FIB 137, FJA 137, FMI 137, FND
137, FTM 137, FVE 137, FWC 137, FWD 137, TLK 137, TMB 137, T3A 137
VBP 137 (sheet 2 of 2)
3694 \ f27326 \ 5.21.8
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-77
 Chapter 4 Drawings
Ball Grid Array: LAB 080 (sheet 1 of 2)
(322.6)
6.35 *
*315.0
2.54 R.
4 PLACES
VACUUM PICKUP CELLS
10 PLACES
X
SEE DETAIL "I"
7.62
CLOSED CELLS
4 PLACES
(8 CENTER CELLS, 2 SIDE CELLS)
Z
SEE DETAIL "E"
X
X
117.9
±0.25
*
135.9 *
92.1
13.10
12.7
B
*
17.20
9.00
11.30
CHAMFER
3.0X45˚
*
SEE DETAIL "F"
SEE DETAIL "D"
SEE DETAIL "B"
*
1.6 R.
3 PLACES
SEE DETAIL "C"
292.4±0.25
C
*
8XR2.54 MAX
SEE DETAIL "H"
0.76
A
SEE DETAIL "G"
2.54
255.3
0.20 M A X M
25.4
34.3
0.20 M A Z M
* 311.15
* 132.08
+0.25
-0.13
7˚
+0.25
-0.13
3.11
30˚
+0.25
-0.13
* 311.66
+0.25
-0.13
* 132.59
0.20 M A X M
0.20 M A Z M
7˚
DETAIL "H"
FBGA
SECTION "Y-Y"
SECTION "X-X"
TRAY STACKING DETAIL
FEMALE
MALE
XXXXXXX
15 X 10
*
REVISION
LETTER
ITEM NO.
DETAIL "G"
BOTTOM VIEW
DETAIL "D"
SLIP-LOCK DETAILS
DETAIL "I"
Notes:
3474a \ 27327d
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-78
 Chapter 4 Drawings
Ball Grid Array: LAB 080 (sheet 2 of 2)
*
B
* 15.20±0.08
15.20±0.08
0.50 M A B C
0.50 M A B C
2.00
-7˚/S
0.95
10.20 ±0.08 *
0.50 M A B C
A
A
* 10.20±0.08
0.50 M A B C
7˚
DETAIL "K"
40˚
B
TOP VIEW
DETAIL "B"
BOTTOM VIEW
DETAIL "B"
DAEWON
DETAIL "E"
FBGA 15X10 / LAB 080
2.00
-5˚/S
DETAIL "J"
RECYCLING LOGO
150˚C MAX
TEMPERATURE
RATING BLOCK
TRAY MADE IN KOREA
DAEWON PART NO.
DETAIL "F"
16.25-40˚/S
40˚
1.50
-12˚/S
9.40
+12˚/S
2.00
+12˚/S
13.20±0.08
2.5
2.0
7.62
12B-1510-C19
MPPO
7
0.50 M A B C
* 15.20±0.08
3.8
0.75
SEE DETAIL "J"
1.30
±0.10
0.55
3.5
0.75
6.35
3.11 4.51
1.3
1.40
1.67
10.60
-10˚/S
13.60
-10˚/S
3.60
-10˚/S
* 15.20±0.08
15.43-7˚/S
*10.20
±0.08
8.80
±0.08
11.25
-40˚/S
2.90
-5˚/S
DETAIL "L"
2.90
-7˚/S
SECTION "A-A"
5.64
+12˚/S
1.35
+12˚/S
0.20
SEE DETAIL "K"
0.50 M A B C
0.50 M A B C
1.15
±0.10
SEE DETAIL "L"
1.30
±0.10
0.95
0.55
3.11 4.51
8.60
-10˚/S
10.43
-7˚/S
*10.20
±0.08
0.50 M A B C
6.60
-10˚/S
3.60
-10˚/S
1.15
±0.10
SECTION "B-B"
0.20
SEE DETAIL "M"
7˚
DETAIL "M"
3474b \ 27327d
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-79
 Chapter 4 Drawings
Ball Grid Array: LAC 064, LSC 080 (sheet 1 of 2)
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-80
 Chapter 4 Drawings
Ball Grid Array: LAC 064, LSC 080 (sheet 2 of 2)
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-81
 Chapter 4 Drawings
Ball Grid Array: TLB 069, TLB 088, TSE 088, TLB 089(sheet 1 of 2)
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-82
 Chapter 4 Drawings
Ball Grid Array: TLB 069, TLB 088, TSE 088, TLB 089 (sheet 2 of 2)
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-83
 Chapter 4 Drawings
Ball Grid Array: ALD 128, ALF 128, ALG 128, ALJ 128, AMB 128, ASC 128,
ASF 128 (sheet 1 of 2)
3570-1 / 29476a
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-84
 Chapter 4 Drawings
Ball Grid Array: ALD 128, ALF 128, ALG 128, ALJ 128, AMB 128, ASC 128,
ASF 128 (sheet 2 of 2)
3570-2 / 29476b
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-85
 Chapter 4 Drawings
Ball Grid Array: NLB 044, NSB 044, VDA 044, VDD 044, NLB 056, NSB 056, NSD 056,
VDD 064, VDH 064 (sheet 2 of 2)
3416 \ f27328a \ 12-13-07
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-86
 Chapter 4 Drawings
Ball Grid Array: NLB 044, NSB 044, VDA 044, VDD 044, NLB 056, NSB 056, NSD 056,
VDD 064, VDH 064 (sheet 2 of 2)
3416 \ f27328a \ 12-13-07
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-87
 Chapter 4 Drawings
Ball Grid Array: RSB 044, VDL 044, RLF 052, RSB 052 (sheet 1 of 2)
g1046.1/f30672/11.27.11
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-88
 Chapter 4 Drawings
Ball Grid Array: RSB 044, VDL 044, RLF 052, RSB 052 (sheet 2 of 2)
g1046.2/f30672/11.27.11
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-89
 Chapter 4 Drawings
Ball Grid Array: VCB 048, VCD 056, VCE 056 (sheet 1 of 2)
(322.6)
315.0 *
2.54 R.
4 PLACES
X
SEE DETAIL "D"
VACUUM PICKUP CELLS
20 PLACES
Y
5.62*
Z
(16 CENTER CELLS, 4 SIDE CELLS)
7.62
SEE DETAIL "E"
X
X
115.2
±0.25
135.9*
92.1
* 12.80
B
12.7
* 10.35
11.80 *
SEE DETAIL "B"
SEE DETAIL "G"
Y
SEE DETAIL "F"
10.00 *
CHAMFER
3.0X45ß
1.6 R.
3 PLACES
SEE DETAIL "C"
295.0 ±0.25
C
*
SEE DETAIL "H"
0.76
A
8XR2.54 MAX
SEE DETAIL "I"
2.54
255.3
25.4
0.20 M A X M
0.20 M A Z M
*
311.15
*
132.08
+0.25
-0.13
34.3
R4.75
+0.25
-0.13
0.80
7˚
+0.25
-0.13
* 311.66
*
0.20 M A X M
3.11
DETAIL "C"
+0.25
-0.13
132.59
30˚
7˚
0.20 M A Z M
SECTION "X-X"
SECTION "Y-Y"
TRAY STACKING DETAIL
FEMALE
DETAIL "H"
MALE
FBGA
7.8 X 9
XXXXXXX
*
ITEM NO.
BOTTOM VIEW
DETAIL "G"
SLIP-LOCK DETAILS
DETAIL "D"
Notes:
DETAIL "I"
REVISION
LETTER
3475a \ 27586b
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-90
 Chapter 4 Drawings
Ball Grid Array: VCB 048, VCD 056, VCE 056 (sheet 2 of 2)
9.20 ±0.08 *
0.50 M A B C
9.20 ±0.08 *
0.50 M A B C
B
* 8.00 ±0.08
0.50 M A B C
A
A
8.00 ±0.08 *
0.50 M A B C
2.60
-5˚/S
BOTTOM VIEW
DETAIL "B"
B
TOP VIEW
DETAIL "B"
0.80
DAEWON
FBGA 7.8X9 / VCB 48
30˚
DETAIL "E"
RECYCLING LOGO
DETAIL "K"
150˚C MAX
TEMPERATURE
RATING BLOCK
3.8
3.5
7.62
7
7.20
±0.08
TRAY MADE IN KOREA
4.80
-5˚/S
2.40
+12˚/S
SEE DETAIL "J"
5.10
-7˚/S
10.05
-40˚/S
2.0
14B-7890-C19
MPPO
DAEWON PART NO.
DETAIL "F"
0.50 M A B C
*
9.20
±0.08
2.5
1.39
±0.10
0.30
5.62
3.11
1.3
10.03
-30˚/S
1.40
1.67
7.20
-10˚/S
1.50
+10˚/S
8.60
-10˚/S
9.20 *
±0.08
30˚
SEE DETAIL "K"
DETAIL "M"
SECTION "A-A"
7.60
-12˚/S
8.00
±0.08
SEE DETAIL "L"
1.30
+12˚/S
8.85
-40˚/S
1.39
±0.10
0.30
0.65
3.11
0.50 M A B C
0.30
40˚
0.50 M A B C
6.00
-10˚/S
8.00
±0.08
1.70
±0.10
4.51
40˚
0.50 M A B C
6.60
±0.08
1.40
8.83
-30˚/S
2.35
-10˚/S
2.60
-5˚/S
DETAIL "J"
1.70
±0.10
0.30
SEE DETAIL "M"
SECTION "B-B"
4.51
6.50
4.80
-5˚/S
DETAIL "L"
3475b\ 27586b
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-91
 Chapter 4 Drawings
Ball Grid Array: VBW 055, NSE 056, TSE 064, TSE 107, TLB 107, VLB 107,
VSB 107 (sheet 1 of 2)
3645 / f29719a / 8.2.7
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-92
 Chapter 4 Drawings
Ball Grid Array: VBW 055, NSE 056, TSE 064, TSE 107, TLB 107, VLB 107,
VSB 107 (sheet 2 of 2)
3645 / f29719a / 8.2.7
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-93
 Chapter 4 Drawings
Ball Grid Array: TLM 137, TSH 137 (sheet 1 of 2)
3644 / f29858a / 8.2.7
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-94
 Chapter 4 Drawings
Ball Grid Array: TLM 137, TSH 137 (sheet 2 of 2)
3644 / f29858a / 8.2.7
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-95
 Chapter 4 Drawings
Ball Grid Array: FDE 048, NLA 048, NSA 048, VDC 048, NLA 060, RLD 133, RLE 133, MTA
133, NLC 133 (sheet 1 of 2)
(322.6)
2.54 R.
4 PLACES
* 315.0
VACUUM PICKUP CELLS
10 PLACES
BUMPS
8 PLACES
Y
(2 CENTER CELLS, 8 SIDE CELLS)
6.35 *
SEE DETAIL "D"
X
7.62
Z
SEE DETAIL "E"
X
X
135.9 *
101.50
±0.25
92.1
*
14.50
B
12.7
*
SEE DETAIL "B"
17.20
13.50
CHAMFER
3.0X45˚
15.75
SEE DETAIL "C"
SEE DETAIL "F"
Y
*
1.6 R.
3 PLACES
*
283.50±0.25
C
*
8XR2.54 MAX
SEE DETAIL "H"
0.76
A
SEE DETAIL "G"
2.54
255.3
25.4
34.3
0.20 M A Z M
0.20 M A X M
* 311.15
* 132.08
+0.25
-0.13
+0.25
-0.13
+0.25
-0.13
* 311.66
+0.25
-0.13
* 132.59
0.20 M A X M
0.20 M A Z M
R4.75
0.762
7˚
DETAIL "C"
SECTION "Y-Y"
SECTION "X-X"
TRAY STACKING DETAIL
FEMALE
3.11
30˚
MALE
7˚
FBGA
11 X 10
XXXXXXX
ITEM NO.
DETAIL "H"
*
REVISION
LETTER
DETAIL "G"
SLIP-LOCK DETAILS
DETAIL "D"
Notes:
3471a \ 26769e
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-96
 Chapter 4 Drawings
Ball Grid Array: FDE 048, NLA 048, NSA 048, VDC 048, NLA 060, RLD 133, RLE 133, MTA
133, NLC 133 (sheet 2 of 2)
*
* 10.15±0.10
10.15±0.10
0.50 M A B C
0.50 M A B C
B
3.35
-5˚
* 11.15±0.10
0.50 M A B C
A
A
*
0.70
11.15±0.10
1.15
0.50 M A B C
40˚
DETAIL "J"
40˚
0.70
B
TOP VIEW
DETAIL "B"
BOTTOM VIEW
DETAIL "B"
RECYCLING LOGO
150˚C MAX
7
12B-1110-D19
MPPO
3.35
-5˚
TRAY MADE IN KOREA
DETAIL "I"
TEMPERATURE
RATING BLOCK
DETAIL "F"
DAEWON PART NO.
DAEWON
FBGA 11X10 / FDE 48/60
DETAIL "E"
11.53
-40˚/S
0.50 M A B C
* 10.15
4.60
-10˚/S
3.35
-5˚/S
±0.10
3.8
2.5
SEE DETAIL "I"
2.50
+10˚/S
8.60
±0.10
1.45
±0.10
1.15
2.0
3.11
7.62
3.5
6.35
4.51
1.3
6.00
-10˚/S
1.40
8.20
-10˚/S
1.67
0.50 M A B C
0.15
40˚
DETAIL "L"
SEE DETAIL "J"
* 10.15
±0.10
11.03
-40˚/S
SECTION "A-A"
1.30
±0.10
4.00
+10˚/S
0.70
12.53
-40˚/S
0.50 M A B C
*11.15
±0.10
9.60
±0.10
40˚
3.50
+10˚/S
6.50
-10˚/S
SEE DETAIL "K"
1.45
±0.10
3.11
4.51
2.50
+10˚/S
0.70
8.75
-10˚/S
3.35
-5˚/S
DETAIL "K"
0.50 M A B C
*11.15
±0.10
12.03
-40˚/S
5.50
-10˚/S
1.30
±0.10
0.15
SEE DETAIL "L"
4.20
-10˚/S
SECTION "B-B"
3471b \ 26769e
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-97
 Chapter 4 Drawings
Ball Grid Array: TLC 056, TSC 056, VBU 056, TLC 080, TSC 080, VBR 080 (sheet 1 of 2)
w3604-1 / 28713c / 9.14.6
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-98
 Chapter 4 Drawings
Ball Grid Array: TLC 056, TSC 056, VBU 056, TLC 080, TSC 080, VBR 080 (sheet 2 of 2)
w3604-2 / 28713c / 9.14.6
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-99
 Chapter 4 Drawings
Ball Grid Array: LAE 064
(sheet 1 of 2)
g1052.1/f29853/12.4.11
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-100
 Chapter 4 Drawings
Ball Grid Array: LAE 064 (sheet 2 of 2)
g1052.2/f29853/12.4.11
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-101
 Chapter 4 Drawings
Ball Grid Array: NLE 133, NSC 133, RLB 133, RSC 133 (sheet 1 of 2)
3862-1 / 29718b
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-102
 Chapter 4 Drawings
Ball Grid Array: NLE 133, NSC 133, RLB 133, RSC 133 (sheet 2 of 2)
3572-2 / 29718b
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-103
 Chapter 4 Drawings
Ball Grid Array: ALH 160, AMA 160, ASE 160, ATA 160, BTA 160, BWA 160,
BWB 160 (sheet 1 of 2)
3571-1 / 29716a
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-104
 Chapter 4 Drawings
Ball Grid Array: ALH 160, AMA 160, ASE 160, ATA 160, BTA 160, BWA 160,
BWB 160 (sheet 2 of 2)
3571-2 / 29716a
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-105
 Chapter 4 Drawings
Ball Grid Array: TLD 064, FEA 084, FED 084, FFA 084, FIA 084, FMC 084, FTF 084, FTI 084,
TLD 084, TMA 084, TSD 084, FWA 084, FLL 096, FEA 104, FMC 107, FFA 115, FMC 115,
FOA 115, FTF 115, FTG 115, FUB 115, FWA 115, FEA 137, FMC 137, FTF 137, TLD 137, TSD
137 (sheet 1 of 2)
(322.6)
315.0 *
2.54 R.
4 PLACES
5.62 *
X
SEE DETAIL "D"
VACUUM PICKUP CELLS
14 PLACES
7.62
Y
Z
(12 CENTER CELLS, 2 SIDE CELLS)
SEE DETAIL "E"
X
X
115.2
±0.25
135.9 *
92.1
* 12.80
B
12.7
SEE DETAIL "B"
* 10.35
14.65
SEE DETAIL "G"
Y
*
SEE DETAIL "F"
SEE DETAIL "C"
11.00 *
CHAMFER
3.0X45˚
1.6 R.
3 PLACES
293.0 ±0.25
C
*
SEE DETAIL "H"
0.76
A
8XR2.54 MAX
SEE DETAIL "I"
2.54
255.3
0.20 M A X M
25.4
0.20 M A Z M
34.3
R4.75
R
R
311.15
+0.25
-0.13
132.08
+0.25
-0.13
0.76
7˚
3.11
R
+0.25
-0.13
311.66
R
0.20 M A X M
+0.25
-0.13
132.59
30˚
DETAIL "C"
7˚
0.20 M A Z M
SECTION "X-X"
SECTION "Y-Y"
DETAIL "H"
TRAY STACKING DETAIL
FEMALE
FBGA
MALE
XXXXXXX
9 X 12
*
ITEM
NO.
REVISION
LETTER
DETAIL "I"
BOTTOM VIEW
DETAIL "G"
SLIP-LOCK DETAILS
DETAIL "D"
Notes:
w3479a\27844c
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-106
 Chapter 4 Drawings
Ball Grid Array: TLD 064, FEA 084, FED 084, FFA 084, FIA 084, FMC 084, FTF 084, FTI 084,
TLD 084, TMA 084, TSD 084, FWA 084, FLL 096, FEA 104, FMC 107, FFA 115, FMC 115,
FOA 115, FTF 115, FTG 115, FUB 115, FWA 115, FEA 137, FMC 137, FTF 137, TLD 137, TSD
137 (sheet 2 of 2)
12.20±0.08
B
*
12.20±0.08
0.50 M A B C
0.50 M A B C
A
A
* 9.20±0.08
0.50 M A B C
9.20±0.08 *
0.50 M A B C
40˚
0.30
B
TOP VIEW
DETAIL "B"
0.60
BOTTOM VIEW
DETAIL "B"
DAEWON
FBGA 9 X 12 / TMA 115/FMC 104
0.70
2.45-5˚/S
DETAIL "E"
RECYCLING LOGO
DETAIL "J"
150˚C MAX
TEMPERATURE
RATING BLOCK
14B-0912-119
MPPO
7
TRAY MADE IN KOREA
DAEWON PART NO.
DETAIL "F"
6.00
-12˚/S
6.96
-12˚/S
2.00
+12˚/S
13.36
-40˚/S
0.50 M A B C
3.8
11.36
±0.08
2.5
3.5
7.62
12.20 *
±0.08
2.45-5˚/S
SEE DETAIL "J"
1.80
±0.10
0.90
0.30
1.50
2.0
5.62
3.11
1.40
1.67
0.50 M A B C
10.20
-10˚/S
12.20
±0.08
6.20
-10˚/S
3.00
+10˚/S
*
12.79
-20˚/S
*
9.20
±0.08
8.20
±0.08
DETAIL "K"
1.80 0.30
±0.10
40˚
0.60
SEE DETAIL "K"
SECTION "A-A"
0.30
10.36
-40˚/S
0.50 M A B C
20˚
4.51
1.3
3.60-5˚/S
3.00
+12˚/S
6.20
-12˚/S
SEE DETAIL "L"
1.80
±0.10
0.30
0.70
3.60-5˚/S
0.90
3.11
1.50
DETAIL "L"
4.51
20˚
0.50 M A B C
7.40
-10˚/S
*
9.20
±0.08
9.79
-20˚/S
1.80
+10˚/S
4.67
-10˚/S
SECTION "B-B"
1.80 0.30
±0.10
DETAIL "M"
SEE DETAIL "M"
w3479b\27844c
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-107
 Chapter 4 Drawings
Ball Grid Array: VBM 063, VLD 063, LAD 080, FEF 103, FLG 103, FME 103, FTJ 103, TLI
103, TSG 103, ASH 165 (sheet 1 of 2)
3598-1 / 28391a / 8.24.6
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-108
 Chapter 4 Drawings
Ball Grid Array: VBM 063, VLD 063, LAD 080, FEF 103, FLG 103, FME 103, FTJ 103, TLI
103, TSG 103, ASH 165 (sheet 2 of 2)
3598-2 / 28391a / 8.24.6
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-109
 Chapter 4 Drawings
Ball Grid Array: FTK 107, TLH 107 (sheet 1 of 2)
g1050.1/f29473/12.4.11
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-110
 Chapter 4 Drawings
Ball Grid Array: FTK 107, TLH 107 (sheet 2 of 2)
g1050.1/f29473/12.4.11
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-111
 Chapter 4 Drawings
Ball Grid Array: PIA 107, PNA 107 (sheet 1 of 2)
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
g5016.1/f31015/8.23.13
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-112
 Chapter 4 Drawings
Ball Grid Array: PIA 107, PNA 107 (sheet 2 of 2)
*
*
*
*
*
*
*
*
g5016.2/f31015/8.23.13
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-113
 Chapter 4 Drawings
Ball Grid Array: ASA 137 (sheet 1 of 2)
3510-1 \ 28806a
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-114
 Chapter 4 Drawings
Ball Grid Array: ASA 137 (sheet 2 of 2)
3510-2 \ 28806a
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-115
 Chapter 4 Drawings
Ball Grid Array: WZA 052 (sheet 1 of 2)
3596-1 / 29471a / 8.24.6
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-116
 Chapter 4 Drawings
Ball Grid Array: WZA 052 (sheet 2 of 2)
3596-1 / 29472a / 8.24.6
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-117
 Chapter 4 Drawings
Ball Grid Array: VBY 181, ASB 220 (sheet 1 of 4)
g1051.1/f29717/12.4.11
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-118
 Chapter 4 Drawings
Ball Grid Array: VBY 181, ASB 220
(sheet 2 of 4)
g1051.2/f29717/12.4.11
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-119
 Chapter 4 Drawings
Ball Grid Array: VBY 181, ASB 220 (sheet 3 of 4)
g1051.3/f29717
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-120
 Chapter 4 Drawings
Ball Grid Array: VBY 181, ASB 220 (sheet 4 of 4)
g1051.4/f29717/12
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-121
 Chapter 4 Drawings
Ball Grid Array: ALK 202, BNA 202 (sheet 1 of 2)
3597-1 / 29723a / 8.24.6
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-122
 Chapter 4 Drawings
Ball Grid Array: ALK 202, BNA 202 (sheet 2 of 2)
3597-2 / 29723a / 8.24.6
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-123
 Chapter 4 Drawings
Ball Grid Array: ASD 188, BEA 188 (sheet 1 of 2)
3613-1 / f27459a / 11.13.6
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-124
 Chapter 4 Drawings
Ball Grid Array: ASD 188, BEA 188 (sheet 2 of 2)
3613-2 / f27459a / 11.13.6
Notes:
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-125
 Chapter 4 Drawings
Ball Grid Array: VBV 138, TLJ 138 (sheet 1 of 2)
3625-1 / 27575a / 1.29.7
Notes:
(See next page for detailed views)
1 All dimensions are in millimeters.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-126
 Chapter 4 Drawings
Ball Grid Array: VBV 138, TLJ 138 (sheet 2 of 2)
3625-2 / 27575a / 1.29.7
Notes:
1 All dimensions are in millimeters
Packages and Packing Methodologies Handbook
23 Aug 2013
4-127
 Chapter 4 Drawings
CARRIER TAPE DRAWINGS
Dimensional drawings are available for each carrier tape used in the shipment of Spansion products and are found beginning on page 4-129.
Consult your Spansion sales representative for additional information about the carrier tape used
with Spansion products.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-128
 Chapter 4 Drawings
Ball Grid Array: FAB 024, FAC 024, ZSA 024
g1036 / f28807a /11.12.11
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance ±0.2.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Ball Grid Array: FBE 040
g1031 / f26634a /11.12.11
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance ±0.2.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-129
 Chapter 4 Drawings
Ball Grid Array: NLB 044, VDD 044, NLB 056, NSB 044, NSB 056, NSD 056, VDD 064, VDH
064
3587 / f04-28065a / 12-13-07
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance ±0.2.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Ball Grid Array: NLD 044, RLA 044, VDJ 044, VDE 044, NLD 056, NSD 056, RLA 056, RSD
056
3646 \ f04-29857b \ 12-13-07
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-130
 Chapter 4 Drawings
Ball Grid Array: RSB 044, VDL 044, RLF 052, RSB 052
g1039 / f30673a /11.12.11
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance ±0.2.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Ball Grid Array: VDA 044
Ø1.5+0.1/-0.0
12.00
Ø1.50 MIN
2.00
4.00
0.30±0.05
1.75
A
R0.3 MAX
7.5 ± 0.1
*Bo
6.7
*16.0 ± .3
*Ko
*K1
SECTION A-A
A
.25
7.7
*Ao
*Bo
*Ko
*K1
*Ao
.25
R.50
=
=
=
=
9.50
8.50
1.95
1.10
3165\04-27329d
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-131
 Chapter 4 Drawings
Ball Grid Array: FDD 047
g1030 / f26632a /11.12.11
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance ±0.2.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Ball Grid Array: FBA 048, VBF 048, VBK 048
0.30±0.05
4.00
2.00
1.75
Ø1.5+0.1/-0.0
R0.3 MAX
A
Ø1.5 MIN
7.5±0.1
*16.0±0.3
*Bo
6.7
4.7
*K1
12.00
*Ao
*Ko
SECTION A-A
*Ao = 6.60
*Bo = 8.60
*Ko = 1.70
*K1 = 0.80
A
R0.5 TYP
3449 \ 26041h
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch has a cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-132
 Chapter 4 Drawings
Ball Grid Array: FBB 048
0.30±0.05
4.00
2.00
Ø1.5+0.1/-0.0
R0.3 MAX
1.75
A
Ø1.5 MIN
7.5±0.1
*16.0±0.3
*Bo
7.7
4.7
*K1
8.00
*Ao
*Ko
SECTION A-A
* Ao = 6.50
*Bo = 9.50
* Ko = 1.60
* K1 = 0.80
A
R0.5 TYP
3450 \ 26043f
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch has a cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Ball Grid Array: FBC 048, VCE 056, VCD 056, VBD 064, VBJ 064
0.30±0.05
2.00
Ø1.50+0.1/0.0
Ø1.50 MIN
4.00
R0.3 MAX
A
1.75
7.5±0.1
16.0±0.3*
*Bo 7.5
6.5
*Ko
*K1
SECTION A-A
Ao* = 8.50
Bo* = 9.50
Ko* = 1.70
K1* = 0.80
*Ao
12.00
A
R0.5 TYP
3451 \ 26042h
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch has a cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-133
 Chapter 4 Drawings
Ball Grid Array: FBD 048
4.00
2.00
0.30 ± 0.05
Ø1.5 +0.1/-0.0
A
01.5 MIN
RO.3 MAX
1.75
11.5±0.1
*Bo 10.90
*Ao
*Ko
*K1
SECTION A-A
*24.0 ± .3
RO.5 TYP
4.90
*
*
*
*
Ao
Bo
Ko
K1
=
=
=
=
8.00
6.40
12.40
1.70
0.95
Ø1.50 MIN
3197 \ 26911b
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch has a cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Ball Grid Array: FDE 048, NLA 048, NSA 048, VDC 048, NLA 060, MTA 133, NLC 133, RLD
133, RLE 133, RSD 133
Ø1.5 +0.1/-0.0
16.00
Ø1.50 MIN
2.00
1.75 ±.10
4.00
0.30±.05
A
R 0.3 MAX
11.5 ±.1
* Bo
9.8
*24.0 ±.3
*K1
*Ko
SECTION A-A
9.3
*Ao
A
R 0.5 TYP
*Ao = 10.90
*Bo = 11.40
*Ko = 1.90
*K1 = 1.20
3456 \ 28064b
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch has a cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-134
 Chapter 4 Drawings
Ball Grid Array: TLF 048
3541 \ 28807
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch has a cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Ball Grid Array: VBN 048
Ø 1.5 +0.1 / -0.0
12.00
2.00
4.00
0.30±.05
Ø 1.50 MIN
1.75±.10
A
R0.3 MAX
7.5±.1
*Bo 8.9
*16.0±.3
A
*Ko
*K1
*Ao
SECTION A-A
4.9
R0.5
30˚
*Ao
*Bo
*Ko
*K1
=
=
=
=
6.50
10.50
1.90
1.10
28802a \ 3567
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch has a cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-135
 Chapter 4 Drawings
Ball Grid Array: VCB 048
g1035 / f27841a /11.12.11
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance ±0.2.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Ball Grid Array: VDF 048
1.5 +0.1 / -0.0
8.00
0.30±.05
2.00±.10
1.50 MIN
4.00
1.75±.10
A
R0.3 MAX
7.5±.1
5.2
*16.0±.3
*Bo
A
*Ko
*K1
SECTION A-A
R0.5 TYP
*Ao
3.2
*Ao
*Bo
*Ko
*K1
=
=
=
=
4.70
6.70
1.72
0.95
28804a \ 3566
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch has a cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-136
 Chapter 4 Drawings
Ball Grid Array: UDA 048, VDG 048, RLG 052, RSE 052
3642 \ f29244b \ 7.10.7
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch has a cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Ball Grid Array: WZA 052
3586 / 29470a / 8.23.6
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-137
 Chapter 4 Drawings
Ball Grid Array: TLC 056, TLC 080, TSC 056, VBU 056, TSC 080, VBR 080
2.00
4.00
0.30 ± .05
φ1.5+0.1/-0.0
12.00
φ1.50 MIN
1.75
A
R 0.3 MAX
11.5±0.1
45˚
10.0 @ TOP
*24.0±0.3
7.06
*Bo
30˚
*Ko
*K1
.6
.25
8.5 @ TOP
SECTION A-A
*Ao
5.56
.25
R .50
A
*Ao= 7.80
*Bo= 9.30
*Ko= 2.40
*K1= 1.28
3394 \ 28386a
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Ball Grid Array: VCA 056
g1033 / f27571a /11.12.11
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance ±0.2.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-138
 Chapter 4 Drawings
Ball Grid Array: VCC 056
g1034 / f27773a /11.12.11
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance ±0.2.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Ball Grid Array: FBD 063
1.5+0.1/-0.0
DIA TYP
0.30±0.05
1.75
4.00
11.5 ± 0.1
2.00
A
R0.3 MAX
*Bo
13.3
*24.0 ± 0.3
*Ko
*K1
SECTION A-A
A
*Ao = 8.50
*Bo = 14.50
*Ko = 1.90
*K1 = 1.30
7.3
1.50 ±0.05 DIA TYP
12.00
*Ao
3452 \ 26394e
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-139
 Chapter 4 Drawings
Ball Grid Array: FBE 063, FSA 063, FSD 063, FBE 080, VBC 080, FBF 084
4.00
Ø1.50 MIN
0.30±0.05
Ø1.5 +0.1/-0.0
2.00
A
R0.3 MAX
1.75
11.5±0.1
*Bo
*24.0±0.3
*10.7
R0.5 TYP
Ko*
A
*9.7
K1*
16.00
*Ao
SECTION A-A
*Ao
*Bo
*Ko
*K1
=
=
=
=
11.30
12.30
2.20
1.40
3161\4-26633e
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Ball Grid Array: FAA 064
0.30 ± .05
Ø 1.5+0.1/-0.0
16.00
Ø 2.00 MIN
2.00
4.00
R 0.6 MAX
1.75
A
11.5±0.1
*Bo 11.8
*24.0±0.3
*Ko
*K1
Section A-A
A
8.8
.25
*Ao
.25
R 50
*Ao = 10.60
*Bo = 13.60
*Ko = 1.90
*K1 = 1.00
3254 \ 04-27460c
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-140
 Chapter 4 Drawings
Ball Grid Array: LAA 064, LIA 064, LSA 064, LSE 064, LSF 064, LSG 064, LSH 064, LAA
080, LSB 080, MMB 112, FND 115, FTM 115, TMB 115, FIB 137, FJA 137, FMI 137, FND 137,
FTM 137, FVE 137, FWC 137, FWD 137, TLK 137, TMB 137, T3A 137, VBP 137, MTB 277
3163 \ f04-27331b \ 12-13-07
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Ball Grid Array: TLD 064, FEA 084, FED 084, FFA 084, FIA 084, FMC 084, FTF 084, FTI 084,
FWA 084, TLD 084, TMA 084, TSD 084, FLL 096, FEA 104, FMC 104, FMC 107, FMH 107, FFA
115, FMC 115, FTF 115, FUB 115, FWA 115, FEA 137, FMC 137, FTF 137, TLD 137, TSD 137
3588 / 27845c / 8.23.6
Notes:
1 All dimensions are in millimeters (* denotes critical dimension).
2 Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
3 Camber not to exceed 1 mm in 100 mm.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-141
 Chapter 4 Drawings
4 Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Ball Grid Array: TLA 064, TSB 064, VBH 064, TLA 067, FLB 073, FLJ 073, FMD 073, FSB
073, FSC 073, FTA 073, TLA 073, FEB 084, FFB 084, FTA 084, TLA 084, TSB 084, TTA 084,
VBH 084, VSA 084, FTA 088, FLB 093, TLA 093
0.30±0.05
2.00
4.00
Ø1.5 +0.1/-0.0
Ø1.50 MIN
R0.3 MAX
1.75
A
1.0
11.5±0.1
*Bo
*24.0 ± 0.3
12.00
*Ao
*K1
*Ko
*Ao
*Bo
*Ko
*K1
SECTION A-A
=
=
=
=
A
8.40
12.00
1.80
1.30
R0.5 TYP
3155\ / 26944e
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Ball Grid Array: FLA 069, VBG 080, FEC 088, FEE 088, TSA 088, TLE 088, VBG 088, VBL
088, ASA 137
2.00
4.00
0.30±0.05
Ø1.5 +0.1/-0.0
A
1.75
Ø1.5 MIN
R0.3 MAX
11.5
*
Bo
8.10
9.80
*
24.0±0.3
R0.5 TYP
*
Ko
* K1
*
Ao
6.80
A
12.00
SECTION A-A
*Ao = 8.30
*Bo = 11.30
*Ko = 1.92
*K1 = 1.17
3454 \ 26770d
Notes:
1 All dimensions are in millimeters (* denotes critical dimension). This tape is the 24-mm size.
2 Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
3 Camber not to exceed 1 mm in 100 mm.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-142
 Chapter 4 Drawings
4 Tolerance is ±0.1 mm unless otherwise specified.
Ball Grid Array: VBW 055, NSE 056, TSE 064, TLB 069, TLB 088, TSE 088, TLB 089, TLB
107, TSE 107, VSB 107
3589 / 27842c / 8.23.6
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Ball Grid Array: FLK 073, FMB 073, FTE 073, FVC 093, FMB 104, FFC 115, FFD 115, FMB
115, FPB 115, FTE 115, FTL 115, BFA 188, BNB 188
3311 \ f04-27840b \ 12-13-07
Notes:
1 All dimensions are in millimeters (* denotes critical dimension).
2 Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
3 Camber not to exceed 1 mm in 100 mm.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-143
 Chapter 4 Drawings
4 Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Ball Grid Array: LAE 064
g1023 / 29854 / 11.9.11
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance ±0.2.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Ball Grid Array: LAB 080
0.30±0.05
Ø1.5+0.1/-0.0
12.00
Ø1.50 MIN
2.00
4.00
R0.3 MAX
1.75
A
11.5±0.1
*Bo
13.3
*24.0±0.3
*Ko
*K1
SECTION A-A
A
R0.5 TYP.
8.3
*Ao
*Ao
*Bo
*Ko
*K1
=
=
=
=
10.50
15.50
1.80
0.70
3164\04-27452b
Notes:
1 All dimensions are in millimeters (* denotes critical dimension).
2 Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
3 Camber not to exceed 1 mm in 100 mm.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-144
 Chapter 4 Drawings
4 Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Ball Grid Array: LAC 064, LSC 080
Ø1.5+0.1/0.0
16.00
Ø 2.00 MIN
2.00
4.00
0.30 ±.05
1.75
A
R 0.3 MAX
14.2±0.1
*Bo 16.3
28.4±0.1
32.0±0.3
*Ao
*Ko
*K1
A
.25
10.3
*Ao = 12.50
*Bo = 18.50
*Ko = 2.05
*K1 = 0.95
SECTION A - A
.25
R 0.75
0.20±0.05
R.50
3312 \ 27581c
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Ball Grid Array: VBE 088, VBS 088
Ø1.5+0.1/-0.0
16.00
2.00
4.00
0.30±.05
1.75±.10
Ø1.50 MIN
R 0.3 MAX
11.5±.1
*
Bo
10.5
* 24.0±.3
*Ko
8.6
1.35
* K1
*Ao
SECTION A-A
.25
.25
*Ao = 10.15
*Bo = 12.25
*Ko = 1.70
*K1 = 0.82
R.50
3459 \ 27779c
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-145
 Chapter 4 Drawings
Ball Grid Array: VLD 063, VBM 063, LAD 080, FEF 103, FLG 103, FME 103, FTJ 103, TLI
103, TSG 103, ASH 165
3590 / 28714b / 8.23.6
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.Ball Grid Array
FTK 107, TLH 107
g1037 / f29475a /11.12.11
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance ±0.2.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-146
 Chapter 4 Drawings
Ball Grid Array: FOA 115
12.00
2.00
4.00
0.30±.05
φ1.50 MIN
φ1.5+0.1/-0.0
1.75
A
R 0.3 MAX
11.5±0.1
Bo 9.7
*24.0±0.3
.25
7.7
*Ko
*K1
SECTION A - A
A
Ao
.25
*Ao = 9.50
*Bo = 11.50
*Ko = 1.93
*K1 = 1.03
R.50
3395 \ 28714a
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Ball Grid Array: ALD 128, ALF 128, ALG 128, ALJ 128, AMB 128, ASC 128, ASF 128,
VBY 181, ASB 220
Ø 1.5 +0.1/-0.0
16.00
Ø 1.50 MIN
2.00 ±.10
4.00
0.30 ±.05
1.75 ±.10
B
B
A
R 0.30 MAX.
11.5 ±.1
* Bo 8.0 5.0
* 24.0 ±.3
* K1
* Ko
SECTION A - A
A
5.0
8.0
*Ao
R 0.5 TYP.
SECTION B - B
*Ao = 12.40
*Bo = 12.40
*Ko = 1.80
*K1 = .70
3579 / 29365 / 7.28.6
Notes:
1 All dimensions are in millimeters (* denotes critical dimension).
2 Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
3 Camber not to exceed 1 mm in 100 mm.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-147
 Chapter 4 Drawings
4 Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Ball Grid Array: NLE 133, NSC 133, RLB 133, RSC 133
Ø 1.5 +0.1 / -0.0
12.00
Ø 1.50 MIN
2.00±.10
4.00
0.30±.05
1.75±.10
A
R0.3 MAX
7.5±.1
*Bo 5.9
*16.0±.3
*Ko
*K1
5.9
R0.5 TYP
*Ao
*Ao
*Bo
*Ko
*K1
=
=
=
=
SECTION A-A
8.40
8.40
2.00
1.00
A
29474a \ 3562
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Ball Grid Array: VBB 080, FTD 088, VBB 088, TLM 137, TSH 137
3647 \ f27775a \ 8.1.7
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-148
 Chapter 4 Drawings
Ball Grid Array: TLJ 138, VBV 138
3626 / 29856a / 1.29.7
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Ball Grid Array: , ALH 160, AMA 160, ASE 160, ATA 160, BTA 160, BWB 160
24.00
2.00±.10
4.00
0.30±.05
Ø 1.5 +0.1 / -0.0
Ø 1.50 MIN
1.75±.10
A
R0.3 MAX
11.5±.1
*Bo
13.35
*24.0±.3
A
*Ko
13.35
*K1
*Ao
SECTION A-A
*Ao
*Bo
*Ko
*K1
=
=
=
=
15.40
15.40
1.95
0.95
.25
.25
R0.50
29472b \ 3563
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-149
 Chapter 4 Drawings
Ball Grid Array: ASD 188, BEA 188
3612 / f29855a / 11.13.6
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Ball Grid Array: ALK 202, BNA 202
3585 / 29724a / 8.23.6
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ± 0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-150
 Chapter 4 Drawings
Ultra Thin Small Outline No Lead Package: UNE 008
3642 \ f29244b \ 7.10.7
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch has a cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Very Very Thin Small Outline No Lead Package: WND 008
3642 \ f29244b \ 7.10.7
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch has a cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-151
 Chapter 4 Drawings
Very Very Thin Small Outline No Lead Package: WNF 008, WNG 008, WNH 008
0.30±0.05
4.00
2.00
1.75
Ø1.5+0.1/-0.0
R0.3 MAX
A
Ø1.5 MIN
7.5±0.1
*16.0±0.3
*Bo
6.7
4.7
*K1
12.00
*Ao
*Ko
SECTION A-A
*Ao = 6.60
*Bo = 8.60
*Ko = 1.70
*K1 = 0.80
A
R0.5 TYP
3449 \ 26041h
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch has a cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Very Thin Quad Flat No Lead Package : VQA 024
g5017 / f31018 /8.23.13
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch has a cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-152
 Chapter 4 Drawings
Plastic Leaded Chip Carrier: PL 032
4.0
Ø1.5 +0.1/-0.0 Dia
2.0
0.30 ± 0.05
A
1.75
0.3 R
MAX
11.5
24.0
± 0.3
*Bo 6.0
1.5
16.0
5.3
*K1
*Ko
*Ao
Section A-A
Ø1.55 +1.00 / -0.05
A
*Ao
*Bo
*Ko
*K1
=
=
=
=
13.1
15.5
4.50
3.50
3267 \ 04-25946b
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance is ±0.2.
Camber will not exceed 1 mm per 100 mm.
Tolerance is ±0.1 mm unless otherwise specified.
Plastic Quad Flat Package: PQR 080
2.00 ± 0.15
0.30 ± 0.05
1.5 +0.1/-0.0 DIA
2.00 MIN
4.00
A
1.75
2.5
0.3 R MAX.
20.2 ± 0.15
*Bo 16.0
45˚
40.4
*44.0 ± 0.3
*Ko
10.0
*K1
*Ao
SECTION A-A
0.75 R
0.20 ± 0.05
A
24.00
0.5 Radius Typical
*Ao = 17.70
*Bo = 23.70
*Ko = 3.50
*K1 = 2.90
3257 \ 04-27577a
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-153
 Chapter 4 Drawings
Shrink Small Outline Package: SSO 056
Notes:
1 All dimensions are in millimeters (* denotes critical dimension).
2 The camber will not exceed 1 mm per 100 mm.
3 Tolerance is ±0.1 mm unless otherwise specified.
Small Outline Package: SO 044
Notes:
1 All dimensions are in millimeters (* denotes critical dimension).
2 50-sprocket hole pitch is 200 ± 0.3mm.
3 Tolerance is ±0.2 mm unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-154
 Chapter 4 Drawings
Small Outline Package: SOA 008
2.00±.05
4.00
0.30±.05
Ø 1.5 +0.1 / -0.0
8.00
Ø 1.50 MIN
A
1.75±.10
R0.3 MAX
5.50±.05
*Bo
*12.0±.3
A
*Ao
3.60
R0.3 TYP
3.00
SECTION A-A
*K1
*Ko
*Ao
*Bo
*Ko
*K1
=
=
=
=
6.90
5.40
2.00
1.70
28392a \ 3568
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Small Outline Package: SOC 008
3540 \ 28801a
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-155
 Chapter 4 Drawings
Small Outline Package: SL3 016, SO3 016, SS3016
B
B
A
A
SECTION A - A
SECTION B - B
3538 \ 28393a
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
Camber not to exceed 1 mm in 100 mm.
Tolerances are .X = ± 0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Thin Small Outline Package: TS/TSR 032 (Type 1)
3537 \ 26072d
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
Ten sprocket hole pitch cumulative tolerance of ±0.2 mm.
The camber will not exceed 1 mm per 100 mm.
Tolerances are .X = ±0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-156
 Chapter 4 Drawings
Thin Small Outline Package: TS/TSR 040 (Type 1)
2.0
1.5 +0.1 / -0.0 DIA
A
4.0
1.75
0.30 ± 0.05
2.5
14.2
28.4
Bo* 18.0
32.0 ± 0.3*
4.0
2.00 Min
16.0
Ko*
K1*
Ao*
12.0
SECTION A-A
A
*Ao
*Bo
*Ko
*K1
=
=
=
=
10.3
20.2
1.7
1.10
0.75 R
0.20 ± 0.05
3398 \ 25465b
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance is ±0.2.
The camber will not exceed 1 mm per 100 mm.
Tolerance is ±0.1 mm unless otherwise specified.
Thin Small Outline Package: T2/T2R 044 (040) (Type 2)
4.0
Ø1.5+0.1 / -0.0 DIA
2.0
0.30 ± 0.05
1.75
0.3 R
MAX
5.7 4.9
14.2
*Bo
28.4 32.0 ± 0.3
R 0.5 TYP
8.6
10.2
Ao*
*K1
*Ko
SECTION A-A
*Ao =
*Bo =
Ko =
*K1 =
12.4
19.0
2.10
1.30
A
Ø 2.00 MIN
16.0
0.20 ± 0.05
R 0.75
3119 \ 25465b
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance is ±0.2.
The camber will not exceed 1 mm per 100 mm.
Tolerance is ±0.1 mm unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-157
 Chapter 4 Drawings
Thin Small Outline Package: TS/TSR 048, TS2 048 (Type 1)
3536 \ 26114e
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance is ±0.2.
The camber will not exceed 1 mm per 100 mm.
Tolerances are .X = ±0.2 mm, .XX = ±0.1 mm, unless otherwise specified.
Thin Small Outline Package: T2A 050 (Type 2)
Ø 1.5 +0.1 / -0.0
16.00
2.00±.10
Ø 2.00 MIN
4.00
0.30±.05
4.9
1.75±.10
5.7
A
R0.3 MAX
A
14.2±.1
*Bo
28.40±.10
*32.0±.3
R1.0
*Ko
*Ao
*K1
R0.5 TYP
8.6
10.2
SECTION A-A
A
*Ao
*Bo
*Ko
*K1
=
=
=
=
12.40
21.40
2.10
1.30
R 0.75
0.20±.05
29370a \ 3564
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance is ±0.2.
The camber will not exceed 1 mm per 100 mm.
Tolerance is ±0.1 mm unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-158
 Chapter 4 Drawings
Thin Small Outline Package: 56-Lead (Type 1) TS, TSR
2.0
1.5 +0.1 / -0.0 DIA
4.0
0.30 ± 0.05*
A
1.75
2.5
14.2
Bo* 18.0
28.4
4.0
32.0 ± 0.3*
2.00 Min
Ko*
K1*
24.0
Ao*
16.1*
SECTION A-A
A
*Ao
*Bo
*Ko
*K1
=
=
=
=
14.2
20.2
1.7
1.10
0.75 R
0.20 ± 0.05
3121 \ 25917b
Notes:
1
2
3
4
All dimensions are in millimeters (* denotes critical dimension).
10 sprocket hole pitch cumulative tolerance is ±0.2.
The camber will not exceed 1 mm per 100 mm.
Tolerance is ±0.1 mm unless otherwise specified.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-159
 Chapter 4 Drawings
TUBE DRAWINGS
The dimensional drawings, beginning on page 4-161, show the dimensions of the tube for each
package family and leadcount, as well as the end-stopper style and dimensions, and the device
pin one orientation.
Consult your Spansion sales representative for additional information about the tubes used with
Spansion products
Packages and Packing Methodologies Handbook
23 Aug 2013
4-160
 Chapter 4 Drawings
Plastic Dual-In-Line
White
Pin
Cushion
(used only
for a partially
loaded tube)
Green
Pin
Pin One End
of Package
20.000" ± 0.030"
0.025" ± 0.005"
0.400"
0.485"
0.620"
0.800"
0.280"
±0.005"
0.197"
0.265"
0.460"
3376 \ 23405-23940
Notes:
1
2
3
4
All dimensions are in inches.
Tolerances: ±0.010 inch, unless otherwise stated.
If the tube is not fully loaded, a cushion is used to help minimize movement of the packages within the tube.
Cushion protrusion not to exceed 0.125 inch from end of tube.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-161
 Chapter 4 Drawings
Plastic Leaded Chip Carrier
End Plug
Pin 1 I.D.
End Plug
0.170
0.150
0.510
0.560
0.228
0.280
0.220
0.025 ± 0.005
(Typ. Wall)
80
0.4
10
1.1
3383 \ 25393-28060
Notes:
1 All dimensions are in inches.
2 Tolerances: ±0.010 inch, unless otherwise stated.
3 If the tube is not fully loaded, a cushion is used to help minimize movement of the packages within the tube.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-162
 Chapter 4 Drawings
Small Outline Package: SO 044
End Plug
Package
Tube
Ejector Pin
Triangle to
Indicate Pin One
of Reverse Package
Pin One I.D.
Standard
End Plug
20.000 ± 0.045
.720
.590
.070
+.005, -.010
.530
Wall
Thickness
.030±.005
.155
.450
.195
.130
.110
.098
.510
.780
3543 / 25128f
Notes:
1
2
3
4
All dimensions are in inches.
Tolerances: ±0.010 inch, unless otherwise stated.
If the tube is not fully loaded, a cushion is used to help minimize movement of the packages within the tube.
Tube has a single hole at each of its ends.
Small Outline Package: SOA 008
20.000±0.045*
VENDOR'S ID &
DATECODE
ANTISTATIC
.024±.005
ALL SIDES
SPANSION™
ESD SYMBOL
RECYCLING LOGO
& PVC CODE
OBSERVE PRECAUTIONS FOR ESD SENSITIVE DEVICES
MYYWW
3
.260*
±.008
.071*
±.005
.150*
±.005
.R.010
R.020
.169
±.005
27846d \ 3569
Notes:
1 All dimensions are in inches.
2 Tolerances: ±0.010 inch, unless otherwise stated.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-163
 Chapter 4 Drawings
Small Outline Package: SOC 008
Package
Tinted Green
End Plug
Tube
Pin One I.D.
Standard
End Plug
509.27 ± 0.25
5.69±0.18
R0.25 Max
2.16±0.13
0.61±0.13
All Sides
4.14±0.13
1.47±0.13
5.21
9.37
10.59
3546 / 29237b
Notes:
1 All dimensions are in millimeters.
2 Tolerances: ±0.25 millimeters, unless otherwise stated.
3 If the tube is not fully loaded, a cushion is used to help minimize movement of the packages within the tube.
Small Outline Package: SL3 016, SO3 016, SS3 016
Package
Tinted Green
End Plug
Tube
Pin One I.D.
Standard
End Plug
20.000 ± 0.045
.310
7˚
.185
.100
+.010, -.005
.035
.058
±.005
.145
.025±.005
All Sides
.580
3544 / 28719b
Notes:
1 All dimensions are in inches.
2 Tolerances: ±0.010 inch, unless otherwise stated.
3 If the tube is not fully loaded, a cushion is used to help minimize movement of the packages within the tube.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-164
 Chapter 4 Drawings
Ultra Thin Samll Outline No Lead Package: UNE 008
Package
Tinted Green
End Plug
Tube
Pin One I.D.
Standard
End Plug
509.27 ± 0.25
6.50±0.13
0.80±0.13
(All Sides)
2.36
±0.20
R0.12 Max (4x) Ref.
R0.40 Max (4x) Ref.
0.76
+0.13,
-0.1
8.10±0.20
3545 / 29242b
Notes:
1 All dimensions are in millimeters.
2 Tolerances: ±0.25 millimeters, unless otherwise stated.
3 If the tube is not fully loaded, a cushion is used to help minimize movement of the packages within the tube.
Very Very Thin Samll Outline No Lead Package: WNF 008, WNG 008, WNH 008
Package
Tinted Green
End Plug
Tube
Pin One I.D.
Standard
End Plug
509.27 ± 0.25
8.50±0.20
0.80±0.13
(All Sides)
2.80
±0.20
R0.12 Max (4x) Ref.
R0.40 Max (4x) Ref.
10.10±0.20
1.20
+0.20,
-0.10
3643 \ f29239 \ 7.30.7
Notes:
1 All dimensions are in millimeters.
2 Tolerances: ±0.25 millimeters, unless otherwise stated.
3 If the tube is not fully loaded, a cushion is used to help minimize movement of the packages within the tube.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-165
 Chapter 4 Drawings
Very Very Thin Samll Outline No Lead Package: WND 008
g5018 \ f31019 \ 8.23.13
Notes:
1 All dimensions are in millimeters.
2 Tolerances: ±0.25 millimeters, unless otherwise stated.
3 If the tube is not fully loaded, a cushion is used to help minimize movement of the packages within the tube.
Packages and Packing Methodologies Handbook
23 Aug 2013
4-166