USM6F type taping specification １．Taping specifications All models of USM6F package product is wrapped to tape. For more information about taping dimensions, please refer to figure 1. tape shape and dimensions. ２．Ordering unit It is wrapped 8,000 by one reel. For more information about reel dimensions, please refer to figure 2. reel shape and dimensions. ３．Leader and trailer specifications at the time of the reel packing. About leader and trailer specifications, please refer to figure 3. leader and Trailer. Please inquire for the other packing specifications. -1- figure 1. tape shape and dimensions. (Unit：mm) Direction → 4.00±0.05 0.18±0.05 +0.1 Φ1.5 -0 1.75±0.1 2.00±0.05 3.5±0.05 1.76 0.9±0.05 8.00±0.1 6.25 0.6±0.05 Φ0.5±0.05 2.00±0.05 ポケット穴 Pocket Hole 1.73 -2- figure 2. reel shape and dimensions. φ2 t θ θ DW1 Ri DW2 C B Ａ Rc1 φ1 Ro Rc 2 W1 X Section 断面xx' XX’ W2 Unit：mm Item Symbol Flange Diameter F1 F3 U Ro Thickness E Hub Rc 3 θ θ 9.0 11.4 Diameter B φ60 F1 5.0 F2 3.0 F3 4.0 Depth V 11.9 Location θ 60° Spindle hole diameter C φ13 Width E 2 Depth U 10.5 Location Window Outer radius Inner radius Conner roundness Clearance between window ♯2 Diameter -3- 1.5 W2 ♯1 Diameter Dw 3 ｔ Clearance between flanges (outside) Key Way Rc 4 φ180 W1 Hub Slit F2 A Clearance between flanges(inside) Width V Dimensions Angle θ 60° φ1 φ10 Ro R79 Ri R36 Rc1 R15 Rc2 R6 Rc3 R6 Rc4 R3 Dw1 18 Dw2 12 Dw3 110 φ2 φ3 +3 -3 +0.5 -0.5 +1.0 -1.0 +1 -0 +0.3 -0.3 +0.3 -0.3 +0.3 -0.3 +0.2 -0.2 +0.5 -0.5 +0.5 -0.5 +1 -1 +1 -1 figure 3. leader and Trailer. Direction 引き出し方向 Production No. Contain Part 空ﾎﾟｹｯﾄ部 ﾄﾚｲﾗ-部Part Trailer ﾘｰﾀﾞ-部 Leader Part Item Leader Cover tape Specifications 200pocket/ equal to more than 400mm (cover tape individual MIN 200mm) 50pocket/ Carrier tape （Production No Contain Part） equal to more than 100mm Trailer Carrier tape 80pocket/ equal to more than 160mm -4- Remarks Tape end shall be fixed to outer layer with adhesive Reeling direction shall be as shown above. Tape end shall be fixed to hub with adhesive tape.