Information HJ-FET & GaAs MES FET TAPING SPECIFICATION FOR µ-X (84, 84A, 84B, 84C, 84D) PACKAGES AND MOLD (38, S01) PACKAGES Document No. P10149EJ7V0IF00 (7th edition) Date Published June 2000 N CP(K) 1989, 2000 © Printed in Japan [MEMO] 2 Information P10149EJ7V0IF00 • The information in this document is current as of June, 2000. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. • NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. • NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 The mark shows major revised points. Information P10149EJ7V0IF00 3 [MEMO] 4 Information P10149EJ7V0IF00 CONTENTS 1. INTRODUCTION ......................................................................................................................................6 1.1 ADAPTED AREA ..........................................................................................................................6 2. SPECIFICATION ......................................................................................................................................7 2.1 2.2 2.3 TAPE DIMENSIONS .....................................................................................................................7 2.1.1 84, 84A, 84B, 84C, 84D, 38 PACKAGE......................................................................................... 7 2.1.2 S01 PACKAGE .............................................................................................................................. 8 DIMENSIONS ON REEL..............................................................................................................9 2.2.1 T1, T2............................................................................................................................................. 9 2.2.2 T1A, T2A, T1B, T2B..................................................................................................................... 10 PACKAGING................................................................................................................................11 2.3.1 LEADER AND TRAILER .............................................................................................................. 11 2.3.2 QUANTITY................................................................................................................................... 11 2.3.3 SPLICING .................................................................................................................................... 12 2.3.4 ELECTROSTATIC PREVENTION ............................................................................................... 12 2.4 DEVICE ORIENTATION .............................................................................................................12 2.5 PACKAGE DIMENSIONS (UNIT: mm) .....................................................................................13 3. MECHANICAL DATA............................................................................................................................17 4. PACKING ...............................................................................................................................................17 5. ORDERING INFORMATION .................................................................................................................17 5.1 ORDERING INFORMATION.......................................................................................................17 5.2 ORDERING GROUP CLASSIFIED BY SUPPLYING FORM .................................................17 Information P10149EJ7V0IF00 5 1. INTRODUCTION The recent productive technical matters in the process of constructing a print board and a thick film hybrid IC exist in saving time and power, and Q up. As the effective methods to realize them, the automatic insert machine of electric devices and the automatic assembly machines can be used. NEC has been supporting µ-X and mold package for HJ-FET and GaAs MES FET with low cost and high performance so that the customers can use them in more various application. Now, we support Tape & Reel service which makes possible for the customers to use the automatic assembly machines. The specification is shown following····· 1.1 ADAPTED AREA This specification covers standards on tape packaging µ-X GaAs MES FET, HJ-FET and on tape packaging mold GaAs MES FET, HJ-FET. 6 Information P10149EJ7V0IF00 2. SPECIFICATION 2.1 TAPE DIMENSIONS 2.1.1 84, 84A, 84B, 84C, 84D, 38 PACKAGE t J X G E δ H δ θ A W C L2 D 0.3 N θ L1 K0 F X K1 K XX Section Item Pocket Ceramic PART Lead PART Distance Between Center Line Cover Tape Carrier Tape Overall Thickness Size (mm) Remarks 84, 84A, 84B, 84C, 84D, 38 pkg Length Width A 5.0 ± 0.15 Depth K0 1.5 +0.1 −0 Pitch F 8.0 ± 0.1 Accumulated +0.1 Tolerance –0.3 MAX./10 pitch Taper θ 14° ± 1° At 0.3 mm above bottom At 0.3 mm above bottom Internal Area N 2.4 ± 0.1 At 0.3 mm above bottom L1 0.7 +0.2 −0 At 0.3 mm above bottom L2 0.7 +0.2 −0 Diameter J φ1.55 ± 0.05 Pitch H 4.0 ± 0.1 Accumulated +0.1 Tolerance –0.3 MAX./10 pitch Distance between edge of tape and center of hole. Width Pocket Width Perforation Remark Symbol Position E 1.5 ± 0.1 Length Direct. G 2.0 ± 0.05 Width Direct. D 5.65 ± 0.05 Width W 9.5 +0.3 −0 Width C 12 ± 0.1 Thick. t 0.3 ± 0.05 Depth K1 1.60 ± 0.1 K 1.70 ± 0.1 Thickness: 0.1 mm MAX. Warp: δ = 0.3 mm MAX. Cover Tape and Carrier Tape Total The radius in the case of unspecified corners is 0.3 MAX. Information P10149EJ7V0IF00 7 2.1.2 S01 PACKAGE t J X G E δ H δ θ A W C L2 D 0.3 N θ L1 K0 F X K1 K XX Section Item Pocket Ceramic PART Lead PART Size (mm) Remarks S01 pkg Length Width A 5.0 ± 0.15 At 0.3 mm above bottom Depth K0 1.8 ± 0.1 Internal Area Pitch F 8.0 ± 0.1 Accumulated +0.1 Tolerance –0.3 MAX./10 pitch Taper θ 14° ± 1° At 0.3 mm above bottom Width Pocket Width Perforation N 2.4 ± 0.1 At 0.3 mm above bottom L1 1.15 ± 0.1 At 0.3 mm above bottom L2 1.15 ± 0.1 Diameter J φ1.55 ± 0.05 Pitch H 4.0 ± 0.1 Accumulated +0.1 Tolerance –0.3 MAX./10 pitch Distance between edge of tape and center of hole. Position E 1.5 ± 0.1 Length Direct. G 2.0 ± 0.05 Distance Between Center Line Width Direct. D 5.65 ± 0.05 Cover Tape Width W 9.5 +0.3 −0 Thickness: 0.1 mm MAX. Width C 12 ± 0.2 Warp: δ = 0.3 mm MAX. Carrier Tape Overall Thickness Remark 8 Symbol Thick. t 0.3 ± 0.05 Depth K1 1.90 ± 0.1 K 2.00 ± 0.1 The radius in the case of unspecified corners is 0.3 MAX. Information P10149EJ7V0IF00 Cover Tape and Carrier Tape Total 2.2 DIMENSIONS ON REEL 2.2.1 T1, T2 D A B E C W2 W1 (Unit: mm) Symbol Size A φ180 −1.5 B φ60 −0 C φ13 ± 0.2 D φ21 ± 0.8 E 2 ± 0.5 W1 13 −0 W2 17 ± 1.0 +0 +1 +1.0 Information P10149EJ7V0IF00 9 2.2.2 T1A, T2A, T1B, T2B W2 W1 W (Unit: mm) 10 Symbol Size A φ330 ± 2.0 B φ100 ± 1 C φ13 ± 0.2 D φ21 ± 0.8 E 2 ± 0.5 W 13.5 ± 1.0 W1 (2.0) W2 17.5 ± 1.0 Information P10149EJ7V0IF00 A B E C D 2.3 PACKAGING 2.3.1 LEADER AND TRAILER Carrier Tape Cover Tape Trailer Leader Hub Real Item Leader Trailer Specification Remarks Cover Tape Cover tape without carrier 200 mm MIN. Tip taped to rool Carrier Tape Empty pocket 10 MIN. Take up direction as the above Carrier Tape Empty pocket 17 to 20 pieces 2.3.2 QUANTITY 1 000 pieces/reel (-T1, -T2) 5 000 pieces/reel (-T1A, -T2A) 4 000 pieces/reel (-T1B, -T2B) Information P10149EJ7V0IF00 11 2.3.3 SPLICING No carrier or cover tape is spliced. 2.3.4 ELECTROSTATIC PREVENTION Electrostatic prevention measures have been implemented for both carrier and cover tape. 2.4 DEVICE ORIENTATION As shown below. (1) -T1, -T1A, -T1B Gate A A Gate (2) -T2, -T2A, -T2B Drain Remark The letter differs depending on the product. 1 2 A 4 1. Source 2. Drain 3. Source 4. Gate 3 12 Information P10149EJ7V0IF00 A A -T1, -T1A, -T1B: Gate lead is placed perforation hole side. -T2, -T2A, -T2B: Drain lead is placed perforation hole side. Drain 2.5 PACKAGE DIMENSIONS (UNIT: mm) 84, 84A, 84C, 84D Package 1.78±0.2 2 0.5 TYP. 1.78±0.2 1 4 L 3 0.5 TYP. (−SL) 1.7MIN. L 0.1 1.7 MAX. (−T1) 1.0±0.2 L Information P10149EJ7V0IF00 13 84B Package 1.78 ± 0.2 2 1.0 ± 0.2 3 0.5 TYP. 1.0 ± 0.2 0.4 MAX. 1.78 ± 0.2 1.0 ± 0.2 1 4 0.1 1.7 MAX. 0.5 14 Information P10149EJ7V0IF00 38 Package 1.8 ± 0.2 1. 8 GATE LEAD MARK ± 4 0. 0.5 ± 0.1 1.8 ± 0.2 0.5 ± 0.1 2 3 1 2 0.55 ± 0.1 0.5 ± 0.1 8˚ 4.0 ± 0.2 0.5 MIN. Information P10149EJ7V0IF00 0.1+0.2 –0.1 3˚ 1.1 ± 0.1 0.12 ± 0.05 4˚ 15 S01 Package 2.0±0.2 0± 2. 1 0.5 TYP. 4 3 1.9±0.2 1.6 1.5 MAX. 0.125±0.05 0.65 TYP. 4.0±0.2 16 Information P10149EJ7V0IF00 2.0±0.2 2 0. 2 3. MECHANICAL DATA Item Data COVER TAPE ADHESION 0.1 to 1.3 N TAPE BEND STARENGTH – Remarks 10° F When tape is rolled with 15 mm radius, no device should pop out. Caution Carrier tape and cover tape are bonded with thermocompression. 4. PACKING 1 to 10 reel/carton. Type no. (Ordering name and IDSS classification), quantity, lot code and NEC are marked or labeled. 5. ORDERING INFORMATION 5.1 ORDERING INFORMATION (1) Type no. (2) Ordering group (3) IDSS classification (Each reel has only one IDSS classification) (4) Quantity (EXAMPLE) NE3210S01-T1B ALL 20 000 pieces (4) (3) (2) (1) 5.2ý ORDERING GROUP CLASSIFIED BY SUPPLYING FORM The ordering groups are specified in the table below. Ordering Group Supplying Form Quantity -SL Stick 10 pieces/stick -T1 -T2 Tape & Reel (The number specifies the taping direction.) 1 000 pieces/reel -T1A -T2A Tape & Reel (The number specifies the taping direction.) 5 000 pieces/reel -T1B -T2B Tape & Reel (The number specifies the taping direction.) 4 000 pieces/reel The order name consists of a combination of the ordering group and the supplying form. Information P10149EJ7V0IF00 17 [MEMO] 18 Information P10149EJ7V0IF00 Facsimile Message From: Name Company Tel. Although NEC has taken all possible steps to ensure that the documentation supplied to our customers is complete, bug free and up-to-date, we readily accept that errors may occur. Despite all the care and precautions we've taken, you may encounter problems in the documentation. Please complete this form whenever you'd like to report errors or suggest improvements to us. FAX Address Thank you for your kind support. North America Hong Kong, Philippines, Oceania NEC Electronics Inc. NEC Electronics Hong Kong Ltd. Corporate Communications Dept. Fax: +852-2886-9022/9044 Fax: 1-800-729-9288 1-408-588-6130 Korea Europe NEC Electronics Hong Kong Ltd. NEC Electronics (Europe) GmbH Seoul Branch Technical Documentation Dept. Fax: 02-528-4411 Fax: +49-211-6503-274 South America NEC do Brasil S.A. Fax: +55-11-6462-6829 Asian Nations except Philippines NEC Electronics Singapore Pte. Ltd. Fax: +65-250-3583 Japan NEC Semiconductor Technical Hotline Fax: 044-435-9608 Taiwan NEC Electronics Taiwan Ltd. Fax: 02-2719-5951 I would like to report the following error/make the following suggestion: Document title: Document number: Page number: If possible, please fax the referenced page or drawing. Document Rating Excellent Good Acceptable Poor Clarity Technical Accuracy Organization CS 00.6