Optoway SPS-9110VW-2RG 1 *********************************************************************************************************************************************************************** SPS-9110VW-2RG (RoHS Compliant) 1260 to 1620 nm / 3 Gb/s Dual Optical SM Digital Diagnostic Receiver ********************************************************************************************************************************************************************** FEATURES l SMPTE 297-2006 Compliant l Speed from 50 Mbps to 3Gbps l Support Video Pathological Patterns for SD-SDI, HD-SDI and 3G-SDI l Dual Receiver with Duplex LC l Based on Industry Standard SFP l SFF-8472 Digital Diagnostic Function l Single +3.3 V Power Supply l RoHS-6 Compliant l 0 to 70oC Operation l Hot Pluggable DESCRIPTION The SPS-9110VW-2RG is a dual channel optical single mode receiver module designed to receive optical serial digital signals as defined in SMPTE 297-2006. It supports from 50 Mbps to 3 Gbps and is specifically designed for received the SMPTE 259M, SMPTE 344M, SMPTE 292M and SMPTE 424M SDI pathological patterns. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. APPLICATIONS l SMPTE 297-2006 Compliant Electrical-to-Optical Interfaces l High-density Video Routers ORDER INFORMATION P/No. SPS-9110VW-2RG Type 2-RX RX1 λ Sen. (nm) (dBm) 50 to 3000 1260/1620 0 to -20 Bit Rate (Mb/s) RX2 λ Sen. (nm) (dBm) 1260/1620 0 to -20 Package Temp (oC) RoHS Compliant LC SFP with DMI 0 to 70 Yes *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway SPS-9110VW-2RG 2 *********************************************************************************************************************************************************************** ABSOLUTE MAXIMUM RATINGS Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Power Supply Voltage ESD Tolerance on all pins Relative Humidity Symbol Tstg Tc Vcc Min -40 -20 0 --- 5 Recommended Operating Conditions Parameter Symbol Power Supply Voltage Vcc Operating Case Temperature Tc Baud Rate Power Supply Current Icc Min 3.13 0 50 Max 85 85 4 1 95 Units o C o C V KV HBM % RH Typ 3.3 Max 3.47 70 3000 200 150 Notes non-condensing Units / Notes V o C Mb/s mA Receiver Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V) Parameter Optical Wavelength of Operation Sensitivity for SMPTE 424M 2.97 Gb/s Sensitivity for SMPTE 292M 1.485 Gb/s Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Optical Return Loss Electrical CML Output (Differential) Symbol Sen Sen Pa Pd Typ Max Units 1260 0 0 0 0 ---29 1 ----- 1620 -18 -20 -20 -21 -23 --6 nm dBm dBm dBm dBm dBm dBm dB dB 850 135 270 800 1.5 0.5 Vcc+0.3 Vcc+0.3 0.5 mVp-p ps ps ps ns V V V V -------27 550 Optical Rise Time / Fall Time tr / tf Output LOS Voltage -- Low Output LOS Voltage -- High SCL, SDA V OL V OH V OH V OL 1. Min 0 2.5 2.5 0 660 Notes Pathological PRBS 223-1, BER=1E-12 Pathological PRBS 223-1, BER=1E-12 Transition: low to high Transition: high to low AC coupled output 1, SMPTE 424M 1, SMPTE 292M 1, SMPTE 344M 1, SMPTE 259M IOL=-1.6mA, 1 TTL unit load IOH=40µA, 1 TTL unit load 20% to 80%, unfiltered. MODULE DEFINITION Module Definition PIN 5 PIN 6 Interpretation by Host 4 SCL SDA Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector (NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway SPS-9110VW-2RG 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Name Vee RX2RX2+ Vee SCL SDA Vee NC NC NC Vee RX1RX1+ Vee Vcc RX1 Vcc RX2 Vee NC NC NC Function Signal Ground Negative Differential Output (2) Positive Differential Output (2) Signal Ground Serial I2C Clock Serial I2C Data Signal Ground No Connection No Connection No Connection Signal Ground Negative Differential Output (1) Positive Differential Output (1) Signal Ground Power Supply (1) Power Supply (2) Signal Ground No Connection No Connection No Connection Notes +3.3V±5%, Internal connected *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway SPS-9110VW-2RG 4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC 1 RD Re-Clocker 2 100Ω Differential RD + 3 4 VCC 3.3V 5 4. 7K 4. 7K 6 7 I2C CLK 8 I2C DATA 9 10 Vee NC RX2 - NC RX2 + NC Vee Vee SCL Vcc_RX2 SDA Vcc_RX1 Vee Vee NC RX1 + NC RX1 - NC Vee 20 19 18 17 16 100nF 10uF VCC 3.3V 1uH 15 1uH 14 13 100nF 10uF 100nF 10uF 12 11 RD + 100Ω Differential Re-Clocker RD - 1. Consult Chipset manufacturer’s data sheet and application data for appropriate receiver input biasing network. PACKAGE DIAGRAM (Units in mm) *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2008 V1.0 Optoway SPS-9110VW-2RG 5 *********************************************************************************************************************************************************************** REVISION HISTORY Version 1.0 Subject Initial datasheet Release Date 2008/10/1 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2008 V1.0