Q & H SERIES DC/DC MODULES 1400 PROVIDENCE HIGHWAY • BUILDING 2 NORWOOD, MASSACHUSETTS 02062-5015 WWW.INTRONICS.COM Applications • Servers, Switches and Data Storage • Wireless Communications • Distributed Power Architecture • Semiconductor Test Equipment • Networking Gear • Data Communications • Telecommunications • Industrial / Medical The Q and H Families of high power, high density DC/DC converters offer power levels of up to 150 Watt in Industry-Standard Quarter-brick and Half-brick Pinouts. With a wide input voltage range and outputs, ranging from 1.5 to 24 Volts, these converters provide versatility without sacrificing the board space. All models feature an input filter, input undervoltage lockout, overtemperature protection, output current limiting and short circuit protection. Various packaging techniques offer versatility for multitude of applications and requirements. The use of patented design concepts facilitates maximum power delivered with the highest efficiency of up to 93%. All converters combine creative design practices with highly derated power devices to achieve very high reliability, high performance and low cost solution to systems designers. Specifications & Features Summary • No minimum load required • -40°C to +85°C ambient operation • Output adjustment +/-10% range • 1500V, 10MΩ input-to-output isolation • Unique Flat Transformer Technology • Complimentary Circuits • Over Temperature protection • Output remote sense feature • Input undervoltage lockout • Output current limit and short circuit protection • High power density up to 90W/inch³ • MTBF of up to 1,600,000 hours @ 50°C (Bellcore) • Remote On/Off pin control (Negative Logic available) • Meets Basic Insulation requirements of EN60950 (Open Frame Q and H Families) • UL 60950 recognized, TUV EN60950 and CSA C22.2 No. 60950-00 Certified (Approvals Pending) • Meets conducted limits of FCC Class B and CEI IEC61204-3 Class B with external filter Approval Pending Model Input Voltage Range (Vin) I in No Load I in Full Load Vo (V) Io (A) Eff Typ (%) Case Pinout Regulation Line/Load (%) Riple/Noise Typ. (mVp-p) Q150-48S1.5 36 - 75 0.100 1.80 1.5 45 85 Q150 QS ±0.2 / ±0.2 100 Q150-48S1.8 Q150-48S2.5 Q150-48S3.3 Q150-48S5 Q150-48S12 H75-12S2.5 H75-12S3.3 H75-12S5 H75-12S12 H75-12S15 H75-12S24 H100-24S2.5 H100-24S3.3 H100-24S5 H100-24S12 H100-24S15 H100-24S24 H120-48S1.5 H120-48S1.8 H120-48S2.5 H120-48S3.3 H120-48S5 H120-48S12 36 - 75 36 - 75 36 - 75 36 - 75 36 - 75 9 - 18 9 - 18 9 - 18 9 - 18 9 - 18 9 - 18 18 - 36 18 - 36 18 - 36 18 - 36 18 - 36 18 - 36 36 - 75 36 - 75 36 - 75 36 - 75 36 - 75 36 - 75 0.100 0.100 0.100 0.100 0.100 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.100 0.100 0.100 0.100 0.100 0.100 2.20 2.80 3.20 4.00 4.10 4.11 5.29 7.72 7.44 7.44 7.44 2.71 3.48 5.02 4.88 4.93 4.91 1.10 1.30 1.80 3.10 2.30 2.20 1.8 2.5 3.3 5 12 2.5 3.3 5 12 15 24 2.5 3.3 5 12 15 24 1.5 1.8 2.5 3.3 5 12 45 40 35 30 12 15.0 15.0 15.0 6.3 5.0 3.1 20.0 20.0 20.0 8.3 6.7 4.2 30.0 30.0 30.0 40.0 20.0 10.0 86 87 89 91 93 76 78 81 84 84 84 77 79 83 85 85 85 85 86 87 87 90 92 Q150 Q150 Q150 Q150 Q150 H H H H H H H H H H H H H120 H120 H120 H120 H120 H120 QS QS QS QS QS HS HS HS HS HS HS HS HS HS HS HS HS HS HS HS HS HS HS ±0.1 / ±0.1 ±0.1 / ±0.1 ±0.1 / ±0.1 ±0.1 / ±0.1 ±0.1 / ±0.1 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±1.0 / ±1.0 ±1.0 / ±1.0 ±1.0 / ±1.0 ±1.0 / ±1.0 ±1.0 / ±1.0 ±1.0 / ±1.0 100 100 100 100 100 75 75 75 100 100 240 50 50 50 100 100 100 100 100 100 100 100 100 NOTE: ADD SUFFIX “N” FOR NEGATIVE LOGIC VERSIONS Typical at Ta= +25 ºC under nominal line voltage and 75% load conditions, unless noted. The information contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to specification sheet for performance characteristics and application guidelines. BOTTOM VIEW H FAMILY BOTTOM VIEW Q FAMILY 2.30 [58.40] 0.425 [10.80] Vo Sense Trim Sense + Vo + 3 Vin 1.19 [30.23] 0.60 [15.24] 1.45 [38.8] 0.30 [7.62] 2 On/Off 1 Vin + 4 5 6 7 8 0.13 [3.30] 0.13 [3.30] 0.20 [5.08] 4 Vin0.30 0.60 [7.62] [15.24] 1.40 [35.56] 0.60 [15.24] 0.15 [3.81] 2.00 2.00 [50.80] 2.002 [51.30] 0.46 max. [11.7] Θ x 0.040 [1.02] 3 NC (H120) or Case Sense - 6 2 On/Off Sense + 8 Trim 7 0.09 [2.29] All dimensions are in inches [mm] Pins 4 & 8 (Q150) are dia. 0.062 [1.57] Pins 5 & 9 (H) are dia. 0.08 [2.03] 0.08 [2.03] 2 pl. 2.40 [61.00] 0.04 [1.02] 7 pl. Vo+ 9 MOUNTING INSERTS Θ x 0.062 [1.52] 2 pl. 2*R1.5 Vo- 5 1 Vin+ SIDE VIEW 0.50 [12.70] 0.15 [3.81] MOUNTING INSERTS [50.80] M3 X .05 THRU. 2 PLS. 0.14 [3.56] 0.18 min. [4.60] MOUNTING INSERTS M3 X 0.5 THRU 4PL. 2.28 [57.90] 1.90 [48.26] H 120 OPEN FRAME CONSTRUCTION All other pins are dia. 0.040 [1.02] Case: Aluminum material with anodized finish Weight: 39.5g (1.4oz) for Q and 60g (2.3oz) for H Series 0.40 [10.16] Tolerances Inches • XX ±0.020 • XXX ±0.010 Pin: ±0.002 Intronics, Inc. 1400 Providence Highway, Building 2, Norwood, MA 02062-5015 • Phone: 1-800-367-0004, 1-781-551-5500 • Fax: 1-781-551-5555 Rev. C Millimeters • X ±0.5 • XX ±0.25 ±0.05