2080 Arlingate Lane Columbus, Ohio 43228 U.S.A. Phone: 614-850-5000 Toll free: 800-848-6564 Fax: 614-850-1111 www.honeywell.com/sensotec [email protected] CERTIFICATE OF CALIBRATION Product Identification Product Type: TORQUE Customer Name: N/A Model: 1104 Customer PO: N/A Serial No.*: 1181936A Order Code: N/A Part No.: 1104-2K Instrument Serial No.: N/A * A letter at the end of the serial number indicates the associated bridge. Product Specifications Capacity: 2000in-lbs Excitation: 10.0 Vdc Calibrated At: Direction / Type: 2000.00in-lbs Amplifier Output: N/A Torque CW Electrical Leakage: ∞ MegΩ Wiring Code This unit has been calibrated using standards whose accuracies are traceable to the National Institute of Standards and Technology (NIST). Units are calibrated based upon ANSI/NCSL Z540 on equipment whose accuracies are within a 4:1 ratio unless otherwise indicated. Reported values may be scaled due to limitations of test equipment such as dead weight increments or local barometric pressure. This certificate of calibration shall not be reproduced in any form, except in full, without the expressed written consent of Honeywell. If you have any questions concerning this certificate of calibration, please call our service department at (614) 850-5000. Certificate No PRINT DATE: 6/29/2010 *1181936A-004* Page 1 of 2 Document No. 086-1000-09 Calibration Data Input Resistance: 351 Ω Output Resistance: 351 Ω Calibration Factor: 2.2634mV/V TL Operator(s): Calibration Date: 03/24/2010 Calibration Procedure: 072-LC75-10, Rev -, Date 02/19/2008 % Capacity Load (in-lbs) Raw (mV/V) Normalized (mV/V) 0 0.00 -0.0007 0.0000 20 400.00 0.4524 0.4531 40 800.00 0.9046 0.9053 60 1200.00 1.3570 1.3577 80 1600.00 1.8096 1.8103 100 2000.00 2.2628 2.2635 80 1600.00 1.3575 1.3582 60 1200.00 -0.0005 0.0002 40 800.00 0.0000 0.0007 20 400.00 0.0000 0.0007 0 0.00 0.0000 0.0007 Shunt Calibration Data Line No. Shunt Resistor Shunt Sense 1 +ShuntCal(Sig)to+Sense -0.00047 mV/V 60000Ω Zero Shunt Zero Shunt Cal Shunt Cal. Capacity -0.02% 1.45831 mV/V 1288.54606 in-lbs Calibration Standards NIST Traceable # Inst. ID# Description Model Cal Date Date Due 3877880 7241293 TRANSDUCER SIMULATOR TS-10-2 02/09/2010 02/09/2011 3398592 7241469 40 TORQUE ARM CN 2060 07/29/2009 07/29/2011 Error 724225 NIST ASSET No. IS NOT ON THE DATABASE N/A N/A N/A 95920038 TQ-10LBA 10 LB WEIGHTS (10 IN SE S10E-Z 05/16/2007 05/16/2010 Environmental Data Temperature: 74 °F Humidity: 30 %RH Pressure: 14.25 psiA Certificate No *1181936A-004* PRINT DATE: 6/29/2010 Page 2 of 2 Document No. 086-1000-09