HD4MDIPX - Honeywell Security

HD4MDIPX
EQUIP® SERIES 720P TRUE DAY/NIGHT RUGGED
INDOOR/OUTDOOR DOME NETWORK CAMERA
Honeywell’s latest addition to the EQUIP® Series of IP-based products, the HD4MDIPX is
a high definition, True Day/Night rugged indoor/outdoor fixed mini-dome camera. This ultra
compact and vandal-resistant camera provides extremely crisp images at minimal
bandwidth. The HD4MDIPX provides 720p resolution at full frame rate. Progressive scan
technology and 2D edge enhancement provide outstanding clarity and definition. Digital
Noise Reduction results in significant storage savings without sacrificing image quality in low
light. The ¼" progressive scan CMOS sensor offers the latest in digital video surveillance
technology with accurate colour rendition through a wide variety of lighting conditions.
The HD4MDIPX integrates a camera and lens in an ultra compact, single piece,
tamper-proof unit for fast and easy installation in any application. The camera comes
complete with surface and flush mounting options. Wall and pendant mount kits are
also available.
In addition to the low light colour performance, the camera will automatically switch
to black and white. In this mode, lighting can be complemented with infrared for
discreet/covert low light surveillance with exceptional monochrome images.
A 3-D axis gimbal capable of 360° of pan, 180° of tilt and 360° of horizontal rotation
simplifies mechanical camera adjustment. The Vari-focal Auto Iris lens allows the field
of view to be adjusted to suit the scene requirements and an integrated analogue
output allows the installer to connect a local test monitor while adjusting the scene.
A powerful and intuitive web client allows fine tuning of the camera. This can also be
performed from most DVR/NVR set-up utilities.
The HD4MDIPX supports dual video streams and multiple compression formats with rates
up to 25 fps (PAL). The digital compression parameters for the two video streams are
independently configurable. A third analogue stream can be utilised as a back-up or for
local viewing and is also valuable when retrofitting onto an existing analogue input DVR
or encoder (full resolution not available).
With built-in low current Power over Ethernet (IEEE 802.3af), Class 1, power is supplied
to the camera using standard network cabling, eliminating the need for a separate power
supply and associated wiring. In retrofit situations where PoE switching does not exist,
the unit can also be powered directly from 24 VAC.
Market Opportunities
The HD4MDIPX is perfect for installations where excellent picture clarity at minimal
bandwidth is required. At three times the resolution of standard analogue cameras, yet
with similar bandwidth requirements, the HD4MDIPX can be retrofitted on many existing
DVR/NVR installations without requiring additional storage. Its discreet, vandal-resistant,
outdoor design provides maximum protection against dust, dirt and water and provides
optimum performance for both indoor and outdoor applications.
Features
• Outstanding image quality,
720p (1280 X 720) resolution
• Supports both dynamic and static IP
address assignment
• 25 fps progressive scan
• Includes advanced IP locator software to
make system set-up easy
• True Day/Night, 3.3-12 mm VFAI lens with
removable IR cut filter
• Camera tamper detection
• Web server for remote set-up of camera
video and network parameters
• Wall and pendant mount kit available
• Choice of 24 VAC or PoE IEEE 802.3af
class 1 power inputs
• Selectable compression formats
• Supports input and output alarm contacts
• Dual digital video streams simultaneously,
independently configurable
• Supports bidirectional audio
• Video motion detection
• Remote firmware update
• Rugged polycarbonate dome
HD4MDIPX
SPECIFICATIONS
Like all cameras in the EQUIP IP Series, the HD4MDIPX network camera uses Honeywell technology for camera video motion
detection, tamper detection, remote firmware updating and for secure storage of all camera settings. Video motion detection
recognises object motion within the
field of view; then a simple
on-screen notification alerts the user.
Camera tamper detection notifies the
user when a camera’s field of view is
altered, obstructed, or blurred. This
ensures the video’s integrity and
alerts the customer to either a live
event or a system problem that is
causing disruption to the video
stream. Honeywell’s technology also
allows users to remotely upload
firmware to the camera. Set-up is
quick and easy and can be
customised through a web client or
from an NVR or DVR. The built-in
web server provides password
protected access to the camera’s
video and network set-up.
System Diagram
Hybrid DVR
Monitor
NETWORK
NVR
Keyboard
EQUIP SERIES
CAMERAS
Monitors
Monitors
HD4MDIPX
SPECIFICATIONS
Environmental
Operational
Video Standard PAL
Temperature
Operating: -30°C to 60°C
Storage: -20°C to 60°C
Scanning
System
Progressive scan
Image Sensor
1/4" CMOS
Number of
Pixels
(H x V)
1280 x 720
Video
Compression
Industry standard compression
Minimum
Illumination
0.25 lux colour/0.22 lux BW @ 50 IRE, F1.6
0.11 lux colour/0.09 lux BW @ 30 IRE, F1.6
Resolutions
1280 x 720
800 x 450
640 x 360
320 x 180
Bit Rate (Typical)*
3 Mbps
2 Mbps
1 Mbps
0.35 Mbps
Frame Rate
PAL
25 fps
Automatic Lens
DC Iris Level 1-25
Control
Relative
0% to 85%, non-condensing
Humidity
IP Specifications
Frame Rate
25
25
25
25
Storage/Day (GB)
31.64
21.09
10.55
3.69
Video Output
(AUX)
1.0 Vp-p @ 75 Ohms
S/N Ratio
50 dB or more (AGC off)
Auto Gain
Control
Off/On, selectable (10-40 dB)
Video
Streaming
Dual streaming: MPEG-4 and MJPEG
Controllable frame rate and bandwidth
Constant or variable bit rate (MPEG-4)
Automatic
Electronic
Shutter
1/50-1/24,500 (PAL)
Security
Multiple user access levels with password
protection
True Day/Night (TDN), 3.3-12.0 mm
Vari-focal Auto Iris, F1.6
Users
1 Administrator or 1 Guest
Lens Type
White Balance
AWC, AWC Push, Manual
Video Access
from Web
Browser
Camera live view for 1 client. Full control of all
camera settings available to administrator
Audio/Two-Way Line in/out
Electrical
Input Voltage
24 VAC, PoE IEEE 802.3af, Class 1
Input Range
17-28 VAC
Surge
Suppression
1.5 kW transient
Power
Consumption
3.5 W (max)
Mechanical
Dimensions
(W x H x D)
Weight
Minimum
Pentium IV CPU 3.1 GHz or equivalent AMD,
Web
1 GB RAM, AGP graphics card (32 MB RAM)
Browsing
Windows® XP/2003, Internet Explorer 6.0 or later
Requirements
Installation
and
Management
Maintenance
Honeywell IP Utility software identifies the IP
address, checks status of device, Firmware
upgrades over HTTP
Supported
Protocols
HTTP, TCP, RTSP, RTP, UDP, ARP, DNS, RTCP,
FTP, ICMP, DHCP, Bonjour, IGMP, Telnet
Regulatory
See Diagram
1.3 kg camera only
Construction
Housing: Die cast Aluminium
Finish: Cool Grey Powder Coat
Dome: Polycarbonate
Connector
Video Output (AUX): 2-pin Molex connector
Power Input:
Removable screw block
Alarm I/O:
Removable screw block
Network:
RJ45 connector
Audio In:
Removable screw block
Audio Out:
Removable screw block
Emissions
FCC, CE (EN55022)
Immunity
CE (EN55024)
Safety
EU: LVD 2006/95/EC, UL60950
* Actual bit rate is scene and motion dependent
HD4MDIPX
SPECIFICATIONS
System Compatibility
Honeywell Products
Hybrid DVRs
Fusion IV
Full Featured Hybrid Digital Video Recorder, v4.00.6405 or higher
NVRs
Enterprise
NVR Series
Enterprise Class Digital Network Video Recorder System, version 5.75 build 19 or higher
MAXPRO VMS/IP Engine
v R200 SP1 or higher
Fusion IV
v4.00.6411 or higher
Third-Party Products
Refer to the Honeywell Open Technology Alliance for a comprehensive list of compatible products to which this device is integrated.
Accessories
Housing and Mounts
HD4DIP-PK
Pendant Mount Bracket
HD4DIP-WK
Wall Mount Bracket
52 mm
104 mm
1.81”
46.0 mm
2.64”
67.0 mm
4.61”
117.5 mm
6.1”
154.97 mm
90 mm
Ordering
HD4MDIPX
Network, True Day/Night Rugged Fixed Dome, 1/4” Progressive Scan, CMOS, 720p Resolution Camera,
3.3-12 mm VFAI, 24 VAC or PoE IEEE 802.3af, PAL
NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications.
For additional information,
please visit www.honeywell.com/security/me
Honeywell Security Group
LOB Building 08, Office 199
P.O.Box 18530, Jebel Ali
Dubai
United Arab Emirates (UAE)
Tel: +971-4-8073200
www.honeywell.com
HVS-HD4MDIPX-03-ME(0211)DS-E
February 2011
© 2011 Honeywell International Inc.