HD4MWIHX EQUIP® SERIES WIDE DYNAMIC 720P TRUE DAY/NIGHT RUGGED INDOOR/OUTDOOR IP DOME CAMERA Honeywell’s latest addition to the EQUIP® Series of IP-based products, the HD4MWIHX is a high definition, Wide Dynamic, True Day/Night rugged indoor/outdoor fixed mini dome network camera. This ultra compact and vandal-resistant camera provides extremely crisp images at minimal bandwidth. The HD4MWIHX provides 720p resolution at full frame rate. Progressive scan technology and 2D edge enhancement provide outstanding clarity and definition. Digital Noise Reduction results in significant storage savings without sacrificing image quality in low light. The 1/3" progressive scan CMOS sensor offers the latest in digital video surveillance technology with accurate colour rendition through a wide variety of lighting conditions. The HD4MWIHX also supports the PSIA specification for interoperability between network video products. The HD4MWIHX integrates a camera and lens in an ultra compact, single piece, tamper-proof unit for fast and easy installation in any application. The camera comes complete with surface and flush mounting options. Wall and pendant mount kits are also available. In addition to the low light colour performance, the camera will automatically switch to black and white. In this mode, lighting can be complemented with infrared for discreet/covert low light surveillance with exceptional monochrome images. In high contrast lighting conditions, the HD4MWIHX delivers higher quality images and significantly better dynamic range (>100 dB) than conventional IP cameras. Designed for environments with difficult lighting, the HD4MWIHX camera offers a unique solution to capture the whole picture regardless of lighting condition or application. A 3D axis gimbal capable of 360º of pan, 180º of tilt and 360º of horizontal rotation simplifies mechanical camera adjustment. The Vari-focal Auto Iris (VFAI) lens allows the field of view to be adjusted to suit the scene requirements, and an integrated analogue output allows the installer to connect a local test monitor while adjusting the camera field of view. A powerful and intuitive web client allows fine tuning of the camera and the auto iris levels. This can also be performed from most NVR setup utilities. The HD4MWIHX supports dual video streams and multiple compression formats with rates up to 30 frames per second (25 fps for PAL systems). The digital compression parameters for the two video steams are independently configurable. The HD4MWIHX features analogue video out for aiming and focusing. With built-in low current Power over Ethernet (IEEE 802.3af), power is supplied to the camera using standard network cabling, eliminating the need for a separate power supply and associated wiring. In retrofit situations where PoE is not available, the unit can also be powered directly from 24 VAC. Market Opportunities The HD4MWIHX is perfect for installations where excellent picture clarity at minimal bandwidth is required. At three times the resolution of standard analogue cameras, yet with similar bandwidth requirements, the HD4MWIHX can be retrofitted on many existing NVR installations without requiring additional storage. Its discreet, vandal-resistant, outdoor design provides maximum protection against dust, dirt and water and provides optimum performance for both indoor and outdoor applications. Features • Outstanding image quality, 720p (1280 × 720) resolution • Selectable compression formats • PSIA support • Web server for remote setup of camera video and network parameters • 30 fps (25 fps PAL) progressive scan • Dual digital video streams simultaneously, independently configurable • Choice of 24 VAC or PoE IEEE 802.3af power inputs • Remote firmware update • Supports input and output alarm contacts • Supports both dynamic and static IP addresses • Supports bidirectional audio • True Day/Night, 3.3-12 mm VFAI lens with mechanical IR cut filter • Dynamic Range: 115dB • Camera tamper detection • Video motion detection • Wall and pendant mount kit available • Includes advanced IP locator software to make system setup easy • Rugged polycarbonate dome HD4MWIHX SPECIFICATIONS Like all cameras in the EQUIP IP Series, the HD4MWIHX network camera uses Honeywell technology for camera video motion detection, tamper detection, remote firmware updating and for secure storage of all camera settings. Video motion detection recognises object motion within the field of view, then a simple on-screen notification alerts the user. Camera tamper detection notifies the user when a camera’s field of view is altered, blinded or blurred. This ensures the video’s integrity and alerts the customer to either a live event or a system problem that is causing disruption to the video stream. Honeywell’s technology also allows users to remotely upload firmware to the camera. The built-in web server provides password-protected access to the camera’s video and network setup. SYSTEM DIAGRAM Hybrid DVR Monitor NETWORK Analogue out NVR Keyboard EQUIP® Series Cameras Monitor Monitor HD4MWIHX SPECIFICATIONS Environmental Operational Video Standard PAL, NTSC Temperature Operating: -25°C to 55°C Storage: -40°C to 70°C Scanning System Progressive scan Relative Humidity 0% to 85%, non-condensing Image Sensor 1/3 CMOS Number of Pixels (H × V) 1280 x 720 Video Compression Dual stream H.264 and MJPEG Minimum Illumination 0.14 lux colour/0.1 lux BW @ 50 IRE, F1.6 Automatic Lens Control DC Iris Level 1-25 Video Output (AUX) 1.0 V p-p @ 75 ohms Primary Stream Resolution 1280 x 720 800 x 450 640 x 360 320 x 180 Bitrate H.264 (Typical)* 2.7 Mbps 1.8 Mbps 0.9 Mbps 0.315 Mbps Dynamic Range 115 dB S/N Ratio 50 dB or more (AGC off) Frame Rate NTSC/PAL Up to 30/25 fps video in all resolutions Auto Gain Control Off/On, selectable (20-40 dB) Video Streaming Dual streaming: H.264 and MJPEG Controllable frame rate and bandwidth Constant or variable bit rate Automatic Electronic Shutter 1/30-1/87,000 sec (NTSC and PAL) Security Lens Type True Day/Night (TDN), 3.3-12 mm Vari-focal Auto Iris, F1.6 Multiple user access levels with password protection Video Access from Web Browser Full control of all camera settings available to administrator Minimum Web Browsing Requirements Pentium IV CPU 3.1 GHz or faster 2 GB RAM Windows XP®, Windows 7 (32/64), Windows 2K8 (64) Internet Explorer 6, 7, 8 or 9 Angle of View IP Specifications Wide Tele Diagonal 125.7° 29.9° Horizontal 89.8° 23.9° Vertical 63.6° 17.9° Frame Rate 30/25 30/25 30/25 30/25 Storage/Day (GB) 28.48 18.98 9.49 3.32 White Balance Auto, Manual, WBC Push Audio/Two-Way Line in/out Installation and Management Maintenance Honeywell IP Utility software identifies the IP address, discovers cameras, supports firmware upgrades Input Voltage 24 V AC, PoE IEEE 802.3af Input Range 17–28 VAC Supported Protocols HTTP, TCP, RTSP, RTP, UDP, ARP, DNS, RTCP, FTP, ICMP, DHCP, Bonjour, IGMP, Telnet Surge Suppression 1.5 kW transient Standards PSIA support Power Consumption 5.0 W (max) 24 V AC PoE: PD Type 1 Class 2 Electrical Regulatory Mechanical Dimensions (W x H x D) See Diagram Weight 1.3 kg camera only Construction Housing: Die cast Aluminium Finish: Light Grey Powder Coat Dome: Polycarbonate Connector Emissions FCC, CE (EN55022) Immunity CE (EN50130-4) Safety EU: EN60950-1:2006 * Actual bitrate is scene and motion dependent with H.264 stream. Video Output (AUX): 2-pin Molex connector Power Input: Removable screw block Network: RJ45 connector Alarm I/O: Removable screw block Audio In: Removable screw block Audio Out: Removable screw block HD4MWIHX SPECIFICATIONS System Integration Accessories Open IP Integration Housing and Mounts PSIA support and open API for real interoperability between Honeywell and other manufacturer’s IP-enabled security devices. Refer to the Honeywell Open Technology Alliance [http://www.security.honeywell.com/hota/] to learn more about our open and integrated solutions. HD4DIP-PK Pendant Mount Bracket HD4DIP-WK Wall Mount Bracket Pendant Mount Option (156 mm) (90 mm) Hole for 3/4” (19 mm) pipe (156 mm) (41 mm) (104 mm) (46 mm) (117.5 mm) (71.5 mm) (263.7 mm) (156 mm) (186.2 mm) (219 mm) (73 mm) (157.1 mm) (160 mm) (120 mm) Wall Mount Option (84 mm) (70 mm) Ordering HD4MWIHX Network True Day/Night Rugged Fixed Dome, 1/3" Progressive Scan, CMOS, Wide Dynamic 720p Resolution Camera, 3.3-12 mm VFAI, 24 V AC or PoE IEEE 802.3af, H.264, PAL HD4MWIH Network True Day/Night Rugged Fixed Dome, 1/3" Progressive Scan, CMOS, Wide Dynamic 720p Resolution Camera, 3.3-12 mm VFAI, 24 V AC or PoE IEEE 802.3af, H.264, NTSC NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications. For additional information, please visit www.honeywell.com/security/me Honeywell Security Group LOB Building 08, Office 199 P.O.Box 18530, Jebel Ali Dubai United Arab Emirates (UAE) Tel: +971-4-8073200 www.honeywell.com HVS-HD4MWIH-01-ME(0212)DS-E February 2012 © 2012 Honeywell International Inc.