HD4HDIH www.honeywellvideo.com EQUIP® SERIES 1080p HIGH RESOLUTION TRUE DAY/NIGHT RUGGED IP DOME CAMERA Honeywell’s latest addition to the equIP® Series of IP-based products, the HD4HDIH is a high definition, True Day/Night rugged indoor/outdoor fixed minidome network camera. This ultra compact and vandal-resistant camera provides extremely crisp images at minimal bandwidth. The HD4HDIH provides 1080p (1920 x 1080) resolution at full frame rate. Progressive scan technology and 2D edge enhancement provide outstanding clarity and definition. Digital Noise Reduction results in significant storage savings without sacrificing image quality in low light. The 1/2.7” progressive scan CMOS sensor offers the latest in digital video surveillance technology with accurate color rendition through a wide variety of lighting conditions. The HD4HDIH also supports the PSIA specification for interoperability between network video products. The HD4HDIH integrates a camera and lens in an ultra compact, single piece, tamperproof unit for fast and easy installation in any application. The camera comes complete with surface and flush mounting options. Wall and pendant mount kits are also available. In addition to the low light color performance, the camera will automatically switch to black and white. In this mode, lighting can be complemented with infrared for discreet/covert low light surveillance with exceptional monochrome images. A 3D axis gimbal capable of 360º of pan, 180º of tilt and 360º of horizontal rotation simplifies mechanical camera adjustment. The Motorized Focus and Zoom (MFZ) lens allows the field of view to be adjusted to suit the scene requirements and an integrated analog output allows the installer to connect a local test monitor while adjusting the camera field of view. A powerful and intuitive web client allows fine tuning of the camera and the auto iris levels. This can also be performed from most NVR setup utilities. The HD4HDIH supports dual video streams and multiple compression formats with rates up to 30 frames per second (25 fps for PAL systems). The digital compression parameters for the two video steams are independently configurable. The HD4HDIH features analog video out for aiming and focusing. With built-in low current Power over Ethernet (IEEE 802.3af), power is supplied to the camera using standard network cabling, eliminating the need for a separate power supply and associated wiring. In retrofit situations where PoE is not available, the unit can also be powered directly from 24 V AC. Market Opportunities The HD4HDIH is perfect for installations where excellent picture clarity at minimal bandwidth is required. At three times the resolution of standard analog cameras, yet with similar bandwidth requirements, the HD4HDIH can be retrofitted on many existing NVR installations without requiring additional storage. Its discreet, vandal-resistant, outdoor design provides maximum protection against dust, dirt and water and provides optimum performance for both indoor and outdoor applications. Features • Outstanding image quality, 1080p (1920 × 1080) resolution • 30 fps (25 fps PAL) progressive scan • True Day/Night, 3-9 mm MFZ lens with removable IR cut filter • Camera tamper detection • Video motion detection • Wall and pendant mount kit available • Selectable compression formats • PSIA support • Dual digital video streams simultaneously, independently configurable • Remote firmware update • Supports both dynamic and static IP addresses • Includes advanced IP locator software to make system setup easy • Web server for remote setup of camera video and network parameters • Choice of 24 V AC or PoE IEEE 802.3af power inputs • Supports input and output alarm contacts • Supports bidirectional audio • Rugged polycarbonate dome HD4HDIH www.honeywellvideo.com SPECIFICATIONS Like all cameras in the equIP IP Series, the HD4HDIH network camera uses Honeywell technology for camera video motion detection, tamper detection, remote firmware updating and for secure storage of all camera settings. Video motion detection recognizes object motion within the field of view; then a simple on-screen notification alerts the user. Camera tamper detection notifies the user when a camera’s field of view is altered, blinded or blurred. This ensures the video’s integrity and alerts the customer to either a live event or a system problem that is causing disruption to the video stream. Honeywell’s technology also allows users to remotely upload firmware to the camera. Setup is quick and easy and can be customized through a web client or from an NVR. The built-in web server provides password protected access to the camera’s video and network setup. System Diagram Hybrid DVR Monitor NETWORK Analog out NVR Keyboard equIP® SERIES CAMERAS Monitor Monitor HD4HDIH www.honeywellvideo.com SPECIFICATIONS Operational Environmental Video Standard NTSC, PAL Scanning System Progressive scan Image Sensor 1/2.7" CMOS Temperature Operating: 14°F to 122°F (-10°C to 50°C) Storage: -4°F to 140°F (-20°C to 60°C) Relative Humidity 0% to 85%, non-condensing Rating IP66 Number of Pixels 1920 × 1080 (H × V) IP Specifications Minimum Illumination 0.25 lux color/0.22 lux BW @ 50 IRE, F1.2 0.11 lux color/0.09 lux BW @ 30 IRE, F1.2 Video Dual stream H.264 and MJPEG Compression Automatic Lens Control DC Iris Level 1-25 Video Output (AUX) 1.0 V p-p @ 75 ohms S/N Ratio 50 dB or more (AGC off) Primary Stream Resolution 1920 x 1080 1280 × 720 800 × 450 640 × 360 320 × 180 Auto Gain Control Automatic Electronic Shutter Lens Type Angle of View Off/On, selectable (20-40 dB) 1/30 – 1/130,000 sec (NTSC) 1/30 – 1/130,000 sec (PAL) True Day/Night (TDN), 3-9 mm Motorized Focus and Zoom, F1.2 Wide Tele Horizontal 93.0˚ 31.7˚ Vertical 68.4˚ 23.8˚ White Balance Auto, Manual, WBC Push Audio/Two-Way Line in/out Electrical Input Voltage 24 V AC, PoE IEEE 802.3af Input Range 17-28 V AC Surge Suppression 1.5 kW transient Power Consumption 5.0 W (max) 24 V AC PoE: PD Type 1 Class 2 Mechanical Bitrate H.264 (Typical)* Frame Rate Storage/Day (GB) 3.0 Mbps 1.4 Mbps 0.75 Mbps 0.4 Mbps 0.2 Mbps 30/25 30/25 30/25 30/25 30/25 31.6 14.8 7.91 4.22 2.11 Frame Rate NTSC/PAL Up to 30/25 fps video in all resolutions Video Streaming Dual streaming: H.264 and MJPEG Controllable frame rate and bandwidth Constant or variable bit rate Security Multiple user access levels with password protection Video access Full control of all camera settings available from web to administrator. browser Minimum Web Browsing Requirements Installation and Management Maintenance Supported Protocols Pentium IV CPU 3.1 GHz or faster 2 GB RAM Windows XP®, Windows 7 (32/64), Windows 2K8 (64) Internet Explorer 6, 7, 8 or 9 Standards PSIA support Honeywell IP Utility software identifies the IP address, discovers cameras, supports firmware upgrades HTTP, TCP, RTSP, RTP, UDP, ARP, DNS, RTCP, FTP, ICMP, DHCP, Bonjour, IGMP, Telnet Regulatory Dimensions (W × H × D) See diagram Emissions FCC, CE (EN55022) Weight 2.86 lb (1.3 kg) camera only Immunity CE (EN50130-4) Housing: Die cast Aluminum Finish: Cool Gray Powder Coat Dome: Polycarbonate Safety Construction EU: EN60950-1:2006 North American ETL listed to UL/CSA 60950-1 Connector Video Output (AUX): 2-pin Molex connector Power Input: Removable screw block Network: RJ45 connector Alarm I/O: Removable screw block Audio In: Removable screw block Audio Out: Removable screw block *Actual bitrate is scene and motion dependent with H.264 stream. HD4HDIH www.honeywellvideo.com SPECIFICATIONS System Integration Accessories Open IP Integration Housing and Mounts PSIA support and open API for real interoperability between Honeywell and other manufacturer’s IP-enabled security devices. Refer to the Honeywell Open Technology Alliance [http://www.security.honeywell.com/hota/] to learn more about our open and integrated solutions. HD4DIP-PK Pendant Mount Bracket HD4DIP-WK Wall Mount Bracket Pendant Mount Option 6.1" (156 mm) 3.5" (90 mm) 6.1" (156 mm) Hole for 3/4" (19 mm) pipe 1.6" (41 mm) 4.1" (104 mm) 1.8" (46 mm) 4.6" (117.5 mm) 2.8" (71.5 mm) 10.4" (263.7 mm) 6.1" (156 mm) 4.7" (120 mm) 6.2" (157.1 mm) 8.6" (219 mm) 2.9" (73 mm) 6.3" (160 mm) 7.3" (186.2 mm) Wall Mount Option 3.3" (84 mm) 2.7" (70 mm) Ordering HD4HDIH Network True Day/Night Rugged Fixed Dome, 1/2.7" Progressive Scan, CMOS, 1080p Resolution Camera, 3-9 mm MFZ, 24 V AC or PoE IEEE 802.3af, H.264, NTSC HD4HDIHX Network True Day/Night Rugged Fixed Dome, 1/2.7" Progressive Scan, CMOS, 1080p Resolution Camera, 3-9 mm MFZ, 24 V AC or PoE IEEE 802.3af, H.264, PAL NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications. Automation and Control Solutions Honeywell Systems 2700 Blankenbaker Pkwy, Suite 150 Louisville, KY 40299 1.800.323.4576 www.honeywell.com L/HD4HDIHD/D July 2012 © 2012 Honeywell International Inc.