Delivery Program Product Category: Differential Pressure Model: 420 DP Mid Order Code(s): AD412 USE THE CHART BELOW TO DETERMINE LEAD TIMES1 The range or option code with the longest lead time dictates the shipping time. Categories shaded in grey are required selections. For example (reference only): If you build this: AD412 + 50 psid pressure range (BN), 30 °F to 130 °F (1b), 4 mA to 20 mA internal amp (2k), 1/8-27 NPT female pressure port (5h), PVC integral cable (6f), and 17-4 stainless steel wetted diaphragm The order configuration is this: The delivery class is: AD412 – BN – 1b – 2k – 5h – Build-to-order, call 6f Honeywell for lead time 39B Quick-ship Fast track manufacture Build-to-order (Ships in 1-5 days) (Ships within 4 weeks) (Call Honeywell 1-800-848-6564 or +1 614-850-5000) Pressure ranges (psid) 50 (BN), 75 (BP), 100 (BR), 150 (CJ), 200 (CL), 300 (CP), 500 (CR), 750 (CT) Temperature compensation 1a. 60 °F to 160 °F * 1b. 30 °F to 130 °F 1c. 0 °F to 185 °F Internal amplifiers 2k. 4 mA to 20 mA (two wire) * Pressure ports 5h. 1/8-27 NPT female * 5c. 7/16-20 UNF female Electrical termination 6a. Bendix PTIH-10-6P (or equiv.) 6 pin (250 °F) * 6e. Integral cable: Teflon (-54 °C to 245 °C) 6f. Integral cable: PVC (-30 °C to 70 °C) 6g. Integral cable: Neoprene (-20 °C to 80 °C)1 6h. Integral cable: Silicone (-54 °C to 150 °C) 6i. Integral underwater cable (8 m [26 ft]) (max. 80 °C)1 6j. 1/2-14 conduit fitting with 1,5 m [5 ft] 4 conductor PVC cable Wetted diaphragm 17-4 stainless steel * Special calibration 9a. 10 point (5 up/5 down) 20% increments @ 20 °C [68 °F] 9b. 20 point (10 up/10 down) 20% increments @ 20 °C [68 °F] Internal amplifier enhancements 3d. Remote buffered shunt calibration O ring seals 26a. Metal 26c. Teflon 1 LEAD/SHIPPING TIMES ARE APPROXIMATIONS AND MAY VARY DEPENDING ON PRODUCT AVAILABILITY AND OTHER FACTORS. IN NO EVENT SHALL HONEYWELL BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, OR PUNITIVE DAMAGES, EVEN WHERE HONEYWELL HAS BEEN ADVISED OF, OR IS OTHERWISE AWARE OF, THE POSSIBILITY OF SUCH DAMAGES, FOR FAILURE TO MEET SUCH LEAD / SHIPPING TIMES. * Default options. Note: Before selecting option/s, please refer to the Test and Measurement catalog or product data sheet for special application notes and compatibility. A catalog can be ordered on-line at https://home.honeywell-online.com/newTMcatalog. Product data sheets are available on Honeywell’s web site at http://content.honeywell.com/sensing/sensotec/catpages.asp.