FEATURES Metalized Polypropylene – multiple case sizes – Low ESR and self inductance APPLICATIONS EMI/RFI Suppression – Line Bypass – EMI Filters – Across the line – Line to ground Operating Temperature Range -40°C to +110°C +10% at 1 kHz, 20°C +5% optional Capacitance Tolerance IEC60384-14, AC voltage GB/T14472 UL,CUL Dissipation Factor Tan δ at 1 kHz and 20°C Insulation Resistance @20°C (<70% RH)for 1 minute at 100VDC applied Self Inductance 300 VAC 310 VAC .1% Max Terminal to Terminal Terminal to Case 15000 MΩ Minimum 30000 MΩ Minimum@100 VDC 500 MΩ Minimum @ 500 VDC <1 nano-Henry per mm of lead spacing and lead length Terminal to Terminal Dielectric Strength Life Expectancy Dissipation Factor change Construction Electrodes Coating Lead terminations Terminal to case 2250 VDC or 1500 VAC applied for 60 Seconds and 20°C or 3000VDC applied for 3 seconds 2050VAC applied between the terminals Cut off current: 2Aac or 10mAdc and case for 60 Seconds and 20°C Current limiting resistance: 1Ω/V Slew rate: 100V/s 1000 hours at 110°C at 170% of rated voltage with once every hour the voltage is increased to 1000 VAC for 0.1 seconds Capacitance change <10% of initially measured value <0.15% at 1kHz Insulation resistance change >50% of initially specified value Metallized Polypropylene film Vacuum deposited Metal layers Flame retardant Solvent resistant plastic case with epoxy end fill (UL94V-0) Lead free tinned copper leads *17mm lead length available upon request Safety agency Standard Voltage Class Certificate number UL/CUL ENEC (SEMKO) CB (Sweden) CQC UL1283 IEC 60384-14 IEC60384-14 GB/T14472-1998 310 300 300 300 Y2/X1 Y2/X1 Y2/X1 Y2 E221690 SE/0252-3 SE-55114 CQC08001028115 X capacitors are used to suppress electrical noise by reducing the input impedance of the device incorporating the capacitor. X capacitors are connected across the supply line where failure of the capacitor will not result in personal exposure to electrical shock. X2 capacitors are to be used in applications where the peak voltage is <1200V.