Model 406 Tubular Probe • • • • • • • • • • FDA Registered CE Marked for global sales 400 series nominal resistance response curve 2252.4 ohm Resistance @ 25°C (including lead wire resistance) Interchangeable ±0.1°C, 25°C to 45°C per EN 12470, Tested to ±0.1°C, 0°C to 70°C for laboratory use Pressed Disk Ceramic Sensor High sensitivity to temperature change ¼” phone plug connector 3.2mm (0.125”) tube diameter DESCRIPTION 400-series tubular temperature probe FEATURES • • • • APPLICATIONS • • FDA / CE MDD Standard 400 series resistance response Standard ¼” phone plug connector 316 Stainless Steel tube Rectal Temperature Laboratory measurements – liquid immersion PERFORMANCE SPECS Parameter Units Resistance @ 25°C (including lead resistance) Ohms Tolerance 0°C to 70°C °C Beta Value 25/85 K Tolerance on Beta Value % Typical response time in stirred fluid Seconds Insulation Resistance (Min. of 100Mohms for 1 Sec.) Volts Liquid immersion with 15VDC applied Ohms Model Number 406 Rev A www.meas-spec.com 1/3 Value 2252.4 ± 0.1 3976 0.4 < 13 500 > 15Meg 30 June 2008 Model 406 Tubular Probe MECHANICAL DETAILS 30.5 mm REF 3.2 mm 114.3 mm 3048 mm RESISTANCE V TEMPERATURE TABLE Temp °C K-Ohms Temp °C K-Ohms Temp °C K-Ohms 0 7.3554 25 2.2524 50 0.8117 1 6.9894 26 2.1564 51 0.7815 2 6.6444 27 2.0644 52 0.7526 3 6.3194 28 1.9774 53 0.7249 4 6.0114 29 1.8944 54 0.6983 5 5.7194 30 1.8154 55 0.6729 6 5.4444 31 1.7394 56 0.6485 7 5.1834 32 1.6674 57 0.6252 8 4.9374 33 1.5994 58 0.6028 9 4.7034 34 1.5334 59 0.5813 10 4.4824 35 1.4714 60 0.5607 11 4.2734 36 1.4124 61 0.5409 12 4.0744 37 1.3554 62 0.5219 13 3.8864 38 1.3014 63 0.5037 14 3.7084 39 1.2494 64 0.4862 15 3.5394 40 1.2004 65 0.4694 16 3.3784 41 1.1524 66 0.4533 17 3.2264 42 1.1074 67 0.4378 18 3.0814 43 1.0644 68 0.4229 19 2.9444 44 1.0234 69 0.4086 20 2.8144 45 0.9842 70 0.3949 21 2.6904 46 0.9466 22 2.5724 47 0.9106 23 2.4604 48 0.8762 24 2.3544 49 0.8432 Model Number 406 Rev A www.meas-spec.com 2/3 30 June 2008 Model 406 Tubular Probe ORDERING INFORMATION Part Number 081106 Description 406 PROBE,THERM Ω @25ºC 2252.4 MOQ 20 * For quantities less than Minimum Order Quantity – contact distribution NORTH AMERICA EUROPE Measurement Specialties, Inc. 910 Turnpike Road Shrewsbury, MA 01545 Tel: 1-508-842-0516 Fax: 1-508-842-0342 Measurement Specialties, Inc Ballybrit Business Park Galway Ireland Tel: +353-91-753238 Fax: +353-91-770789 Sales email: Sales email: [email protected] [email protected] ASIA Measurement Specialties (China) Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 51807 China Tel: +86 (0) 755 33305088 Fax: +86 (0) 755 33305099 Sales email: [email protected] The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. Model Number 406 Rev A www.meas-spec.com 3/3 30 June 2008