OTS-1Ref Reference Oscillator Link Optiva® SERIES Professional Media Transport SATCOM 1MHz to 20MHz Reference Oscillator Link Optiva® reference oscillator fiber intra-facility links are a high performance, cost-effective alternative to coaxial cable. They provide a secure means of transporting low frequency timing and reference signals allowing all transport signals to be phase locked to a single distributed source. Employing fiber optic links provides much longer transmission distances than copper cables, which simplifies network design, eases installation and even enhances immunity from EMI, RFI and lightning. These transmitters and receivers take Features the high RF performance and diverse features of Emcore’s Ortel technology and combines them into a compact package compatible with the Optiva® OT- 1 to 20 MHz optimized for reference signals CC-16 chassis. The enhanced low frequency performance ideally suits the OTS- 15dB adjustable gain range provides 1Ref optical transport modules for use in applications in conjunction with perfect level match for signal distribution L-band signal, video, or data signals anywhere between studio and trasmission. The OTS-1Ref is the perfect complement to the wide range of Optiva® Designed for high level signal input 50 Ohm BNC Receiver RF power monitoring via LED, SMA & remote monitoring SNMP monitoring and control High-dynamic-range, optically-isolated DFB lasers run cooler and require less power System Design Optiva® is a completely modular hot-swappable platform. Both 19” rack mount and compact tabletop or wall-mountable enclosures are available. The 19” rack-mount enclosure (Model OT-CC-16) can support up to 16 insert cards and provides a single power supply (Model PS-200), or a dual-redundant, hot-swappable power supply option. Compact enclosures are available with 1, 2 or 4 slots. The one slot (OT-DTCR-1) and two slot (OT-DTCR-2) enclosures Fits in Optiva® enclosures, which support both use an external power supply (PS-9012) and optionally have a standard Daisy Chain™ video, audio and data links. 2-pin DC power connector for more custom applications. The four-slot 1 RU Hot swap redundant power supplies virtually eliminate downtime products. 16, 4, 2, & 1 slot enclosures available enclosure (OT-CC-4) uses an integrated power supply. The Optiva® family’s existing wide range of video, audio and data transport products include a unique Daisy-Chain™ feature that multiplexes multiple electrical inputs onto a single fiber, thus resulting in an extremely capable, yet conveniently flexible, signal transport system. Copyright © 2009 Emcore Corporation 626 293 3400 [email protected] www.emcore.com OTS-1Ref Reference Oscillator Link Optiva® SERIES Professional Media Transport SATCOM Performance Highlights Link TX Parameter Min Typical Max Units Frequency Range 1 - 20 MHz RF link Gain (1dBo optical loss, RX gain at max)1 2 12 - dB Fiber Distance 0 - 20 Km Optical Loss 0 - 8 dBo Air Temperature -10 - 50 ˚C RF input - 0 15 dBm TX Gain (TG) at 10 MHz -18 -13 - dB (W/A) RF Flatness (1-20 MHz) - 0.5 2 dB PP Input IP3 (0dBm per tone, 10&11 MHz) 30 34 - dBm Carrier to Noise Ratio, (3dBm RF input, 10 MHz) 130 136 - dB/Hz Spur Free Dynamic Range (1dBo loss) 105 > 111 - dB/Hz²/³ RF return loss - -15 -10 dB Optical Power 5 6 7 dBmo DC Power - 12 110 150 V mA RX Gain (RG), at 10 MHz1 22 27 - dB (A/W) 1 RX Typical Response Gain Flatness (max gain) 1-20 MHz - 0.5 2 dB PP RF Return Loss - -19 -15 dB Output IP3 (10&11 MHz) 24 30 - dBm Output P 1dB @ 10 MHz - 15 - dBm Optical Input Optimal -12 -6 - 10 10 dBmo dBmo DC Power - 12 150 200 V mA 2 dB per division .03 MHZ 20.0 MHZ OTS-1R (TX & RX) 5.06 in. 128 mm 3 RU 1. Link RF GaindB = TG + RG – 2*FiberLossdBo (assumes Rin = Rout) 2. dBmo & dBo indicate optical power & loss to minimize confusion with RF dBm & dB TX Ordering Information Product Code Specifications OTS-1RefT/B5-1306-SA-IC Transmitter, 1-20 MHz, BNC 50 ohm, 1310 nm, 6dBm (typ), SC/APC OTS-1LT/B5-1303-SA-IC Transmitter, 50-3000 MHz, BNC 50 ohm, 1310 nm, 3dBm (min), SC/APC OTS-1LT/B7-1303-SA-IC Transmitter, 50-2500 MHz, BNC 75 ohm, 1310 nm, 3dBm (min), SC/APC OTS-1LT/S5-1303-SA-IC Transmitter, 50-3000 MHz, SMA 50 ohm, 1310 nm, 3dBm (min), SC/APC Enclosure Options OTS-1RefR/B5-SA-IC Receiver, 1-20 MHz, BNC 50 ohm, SC/APC OTS-1LR/B5-SA-IC Receiver, 50-3000 MHz, BNC 50 ohm, SC/APC OTS-1LR/B7-SA-IC Receiver, 50-3000 MHz, BNC 75 ohm, SC/APC OTS-1LR/S5-SA-IC Receiver, 50-3000 MHz, SMA 50 ohm, SC/APC OPV-CTLR-IC NMS SNMP Controller Card & MIB for Optiva Family OTP-1ETR-A2/A2-LC Optical Tcvr, 1Ch, Ethernet, SM, Dual LC OT-CC-16-01 Chassis, 19 in Rack Mount, 16 Slot, 3RU, Rear Access PS-200-NA Power Supply, 12 Vdc, 100 to 240 Vac, 50/60 Hz, N. Amer. AC Cord, for OT-CC-16 OT-CC-4-1U-NA Chassis w/ built-in Power Supply, 1 RU, 4 slots, 110 - 240Vac, N. Amer. AC , Cord OT-DTCR-1 / OT-DTCR-2 Chassis, flange-mount, w/ Power Supply, 1 slot / 2 slot OT-CC-16 OT-CC-4 Information contained herin is deemed to be reliable and accurate as of issue date. Emcore reserves the right to change the design or specifications of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of the EMCORE Corporation. 2008 Emcore Corporation Copyright © 2009 RX 505 293 332 3400 5000 626 505 332 5100 OT-DTCR-2 OT-DTCR-1 Rev: January 28, 2009 [email protected] www.emcore.com [email protected] www.emcore.com