Optoway BTRS-7860CG 1 *********************************************************************************************************************************************************************** BTRS-7860CG / BTRS-7860C-SPG / BTRS-7860ACG / BTRS-7860AC-SPG 1310 nm TX/ 1490 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver ********************************************************************************************************************************************************************** FEATURES DESCRIPTION l l l l l l l l l l l l l l The BTRS-7860CG series is high performance module for single fiber communications by using 1310 nm transmitter and 1490 nm receiver. This module is equipped with 3W-TRXTM OE device to reject 1.55 um high power video signal. The transmitter section uses a multiple quantum well 1310 nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section is designed to receive 1490 nm and block 1550 nm signal. This feature is suitable for IEEE 802.3ah 1000BASE-BX and ITU-T 983.3 application. The receiver section uses an integrated 1490 nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. Bi-Directional Single-Fiber 3W-TRX TM Transceiver Compliant with IEEE 802.3ah 1000BASE-BX 1310 nm DFB LD Transmitter 1490 nm Receiver 1550 nm Enhanced Band Block Link distance up to 60 km Single +3.3 V Power Supply RoHS Compliant LVPECL Differential Inputs and Outputs LVTTL Signal Detect Output 0 to 70oC Operating: BTRS-7860G -20 to 85oC Operating: BTRS-7860AG Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC-60825 Compliant LASER SAFETY APPLICATIONS This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. l WDM Gigabit Ethernet Links l SONET/SDH Equipment Interconnect l Fiber Channel Links ORDER INFORMATION P/No. Bit Rate Distance IEEE (Gb/s) 802.3ah (km) 1000BASE TX (nm) RX (nm) Voltage (V) Package Temp (oC) RX Sens. RoHS TX Power (dBm) Compliant (dBm) BTRS-7860CG BX 1.25 60 1310 DFB 1490 3.3 SC, 2X5 0 to 70 4 to -1 -26 Yes BTRS-7860ACG BX 1.25 60 1310 DFB 1490 3.3 SC, 2X5 0 to 70 4 to -1 -26 Yes Note: 1. BTRS-XXXXXG is SC/PC receptacle type package with standard case 2. BTRS-XXXXX-APBBBG is pigtail type package with different connector, A=S is SC connector, A=F is FC connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm. Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Symbol Tstg Topr Min -40 0 -20 Max 85 70 85 Soldering Temperature Power Supply Voltage Input Voltage Output Current Units o C o C --Vcc --- 0 GND 260 3.6 Vcc Iout 0 30 mA Min 3.13 Typ 3.3 Max 3.47 o C V V Notes BTRS-7860CG BTRS-7860ACG air flow 1m/sec 10 seconds on leads only Recommended Operating Conditions Parameter Power Supply Voltage Symbol Vcc Units / Notes V *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2009 V3.0 Optoway BTRS-7860CG 2 *********************************************************************************************************************************************************************** Operating Temperature Data Rate Power Supply Current Topr 0 -20 o 70 85 1250 C / BTRS-7860CG C / BTRS-7860ACG air flow 1m/sec Mb/s mA o 1300 280 Icc Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3. 47V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Disable Input Voltage -- Low Disable Input Voltage -- High Shut Off Time for TxDis Symbol Min Po -1 1260 λ σλ SMSR 30 ER 9 Compliant with IEEE 802.3z tr tf RIN TJ IIL IIH VIH - VIL V IL - VCC V IH - VCC VTDIS,L VTDIS,H tDIS Typ Max Units Notes 4 1360 1 dBm nm nm dB dB 1 1310 0.26 0.26 -120 0.227 ns ns dB/Hz ns 350 1600 -1.58 -0.74 0.8 Vcc 1 µA µA mV V V V V ms -350 300 -2.0 -1.1 0 Vcc – 1.3 -20 dB Width 20% to 80% Values 20% to 80% Values 2 3 3 TX Output Enabled TX Ouput Disabled Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 27-1 PRBS. 3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3.47V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Optical Return Loss Electrical Data Output Voltage Swing SD Output Voltage -- Low SD Output Voltage -- High Signal Detect Assert Time Signal Detect Deassert Time Symbol Min Typ Max Units Notes --Pin Pa Pd ---3 ---40 1.0 1480 20 ----------- -26 ---26 --- dBm dBm dBm dBm dB nm dB 1 ORL VOH – VOL VOL V OH ASMAX ANSMAX 0.575 0 2.0 1500 0.930 0.8 Vcc+0.3 100 300 V V V µs µs Transition: low to high Transition: high to low 2,3 OFF to ON ON to OFF Notes: 1. Minimum sensitivity and saturation levels at BER 1E-12 for a 27-1 PRBS. 2. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm. 3. At least 30 dB optical isolation for the wavelength 1550 to 1600 nm. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2009 V3.0 Optoway BTRS-7860CG 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN 1 2 3 4 5 6 7 8 Symbol VEEr VCC r SD RD− RD+ VCC t VEEt TxDis 9 10 MS TD+ TDMS Notes Directly connect this pin to the receiver ground plane +3.3V dc power for the receiver section Active high on this indicates a received optical signal. Receiver Dataout Bar. See recommended circuit schematic Receiver Dataout. See recommended circuit schematic +3.3V dc power for the transmitter section Directly connect this plan to the transmitter ground plane Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module To enable module connect to TTL logic low “0” Transmitter Data In. See recommended circuit schematic Transmitter Data In Bar. See recommended circuit schematic Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC depend on customer's PHY Vcc3.3V terminate and bias inside Transceiver module TDZ=50R LVPECL TD+ Z=5OR 10 9 8 7 6 130R 10nF 130R Vcc3.3V 1uH TDTD+ TDis Veet Vcct TXDis(LVTTL) 10nF 10uF 10uF PHY DEVICE Veer Vccr SD RDRD+ 1uH 1 2 3 4 5 BTRS-7XXXC 10nF Vcc3.3V 10uF RD+ 100R LVPECL Z=50R RDZ=5OR depend on customer's PHY SD TO LVTTL STAGE *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2009 V3.0 Optoway BTRS-7860CG 4 *********************************************************************************************************************************************************************** PACKAGE DIAGRAM Units in mm 1) SC Receptacle A) Standard Case BTRS-7860CG / BTRS-7860ACG B) Extended Case BTRS-7860CEG / BTRS-7860ACEG *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2009 V3.0 Optoway BTRS-7860CG 5 *********************************************************************************************************************************************************************** 2) Pigtail BTRS-7860C-SP50G / BTRS-7860AC-SP50G Note: Length L is 50± 3 cm. Other pigtail’s length is available upon request. Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 1/1/2009 V3.0