RL201 THRU RL207 SILICON RECTIFIERS DO-15 FEATURES · Plastic package has Underwriters Laboratory Flammability Classification 94V-O ctilizing Flame Retardant Epoxy Molding Compound. · 2.0 ampere operation at T A=75℃ with no thermal runaway. · Exceeds environmental standards of MIL-S-19500/228 MECHANICAL DATA Case: Molded plastic, DO-15 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Dimensions in inches and (millimeters) Weight: 0.015ounce, 0.4gram Maximum Ratings and Electrical Characteristics Ratings at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60H Z, resistive or inductive load. For capacitive load, derate current by 20%. Symbols RL201 RL202 RL203 RL204 RL205 RL206 RL207 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at T A=75℃ I(AV) 2.0 Amp IFSM 70 Amp VF 1.1 Volts Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 2.0A DC and 25℃ Maximum Reverse Current at TA=25℃ at Rated DC Blocking Voltage T A=100℃ Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range IR 5.0 500 CJ 20 pF RθJA 40 ℃/W TJ -55 to +150 ℃ Tstg -55 to +150 ℃ NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance Junction to Ambient and form junction to lead at 0.375"(9.5mm) lead length P.C.B. Mounted. http://www.trr-jx.com uAmp RL201 THRU RL207 SILICON RECTIFIERS RATINGS AND CHARACTERISTIC CURVES http://www.trr-jx.com