1N4001 THRU 1N4007 SILICON RECTIFIER DO-41 FEATURES · Low forward voltage drop · High current capability · High capability · High surge current capability · Exceeds environmental standards of MIL-S-19500/228 MECHANICAL DATA Case: Molded plastic, DO-41 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.012ounce, 0.33gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Ratings at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60H Z, resistive or inductive load. For capacitive load, derate current by 20%. Symbols 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at T A=75℃ I(AV) 1.0 Amp IFSM 30 Amp VF 1.1 Volts 30 uAmp Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 1.0A DC and 25℃ Maximum Full Load Reverse Current Full Cycle Average at 75℃ Ambient Maximum Reverse Current at TA=25℃ at Rated DC Blocking Voltage T A=100℃ Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range IR CJ 500 uAmp 15 pF RθJA 50 ℃/W TJ -55 to +150 ℃ Tstg -55 to +150 ℃ NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance Junction to Ambient 0.375"(9.5mm) lead length P.C.B. Mounted. http://www.trr-jx.com 5.0 1N4001 THRU 1N4007 SILICON RECTIFIER RATINGS AND CHARACTERISTIC CURVES http://www.trr-jx.com