1N5391 THRU 1N5399 PLASTIC SILICON RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes FEATURES l Low cost l High current capability l High reliability l Plastic package has Underwriters Laboratory DO-15 Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound l 1.5 ampere operation at TL=70 with no thermal runaway l Exceeds environmental standards of MIL-S-19500/228 l Low leakage MECHANICAL DATA Case: Molded plastic , DO-15 Terminals: Plated axial leads, solderable per MIL-STD-202, Method 208 Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 1N5391 1N5392 1N5393 1N5394 1N5395 1N5396 1N5397 1N5398 1N5399 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at TA=60 Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 1.5A Maximum Reverse Current Rated TA=25 DC Blocking Voltage TA=100 Typical Junction capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range TJ,TSTG 50 100 200 1.5 UNITS V V V A 50 A 1.4 5.0 500 25 26.0 -55 TO +150 V A A PF /W 300 400 500 600 800 1000 35 70 140 210 280 350 420 560 700 50 100 200 300 400 500 600 800 1000 NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC. 2. Thermal Resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.Board mounted. RATING AND CHARACTERISTIC CURVES 1N5391 THRU 1N5399 Fig. 1-TYPICAL FORWARD CHARACTERISTICS Fig. 3-FORWARD CURRENT DERATING CURVE Fig. 2-PEAK FORWARD SURGE CURRENT Fig. 4-TYPICAL JUNCTION CAPACITANCE