SF11 T RRTHRU JXSF18 - Superfast Recovery Rectitiers DO-41 FEATURES · High surge capability · Low forward voltage, high current capability · Hermetically sealed · Superfast recovery times · Exceeds environmental standards of MIL-S-19500/228 · Low leakage. MECHANICAL DATA Case: Molded plastic, DO-41 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Dimensions in inches and (millimeters) Weight: 0.012ounce, 0.33gram Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60H Z, resistive or inductive load. For capacitive load, derate current by 20%. Symbols SF11 SF12 SF13 SF14 SF15 SF16 SF18 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 600 Volts Maximum RMS Voltage VRMS 35 70 105 140 210 280 420 Volts Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 600 Volts Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at T A=55 I(AV) 1.0 Amp IFSM 30 Amp Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 1.0A DC and 25 Maximum Reverse Current at TA=25 at Rated DC Blocking Voltage T A=100 Typical Junction Capacitance (Note 1) VF CJ RθJA Maximum Reverse Recovery Time (Note 3) TRR Storage Temperature Range 50 -55 to +125 Tstg -55 to +150 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance from Junction to Ambient 0.375"(9.5mm) lead length P.C.B. Mounted. pF 25 35 Volts uAmp /W 50 TJ 3- Reverse Recovery Test Conditions IF=.5A IR=1A IRR=.25A. 1.7 500 NOTES: http://www.trr-jx.com 1.25 5.0 IR Typical Thermal Resistance (Note 2) Operating Junction Temperature Range 0.95 50 nS SF11 T RRTHRU JXSF18 - Superfast Recovery Rectitiers RATINGS AND CHARACTERISTIC CURVES http://www.trr-jx.com