SF101 THRU SF109 SUPER FAST RECOVERY RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features Superfast recovery times Low forward voltage, high current capability Hermetically sealed Low leakage High surge capability Plastic package has Underwriters Laboratories Flammability classification 94V-0 utilizing Flame retardant epoxy molding compound Mechanical Data DIM ENSIONS Case: Molded plastic, DO-41 Terminals: Axial leads, solderable to MIL-STD-202, method 208 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.33 gram inches DIM mm Min. Max. Min. Max. A 0.165 0.205 4.2 5.2 B 0.079 0.106 2.0 2.7 C 0.028 0.034 0.71 0.86 D 1.000 - 25.40 - Note Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. Symbols SF 101 SF 102 SF 103 SF 104 SF 105 SF 106 SF 107 SF 108 SF 109 Units Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 105 140 210 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 150 200 300 400 600 800 1000 Volts Maximum average forward current 0.375" (9.5mm) lead length at TA=55 I(AV) 1.0 Amp Peak forward surge current, IFM (surge): 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) IFSM 30.0 Amps Maximum forward voltage at 1.0A DC VF Maximum DC reverse current at rated DC blocking voltage TA=25 TA=125 IR 5.0 400.0 A Maximum reverse recovery time (Note 1) Trr 35.0 nS CJ 22.0 F 50.0 /W Typical junction capacitance (Note 2) Typical thermal resistance (Note 3) Operating and storage temperature range R 0.95 1.25 JA TJ, TSTG -55 to +150 Notes: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0MHz and applied reverse voltage of 4.0 VDC (3) Thermal resistance from junction to ambient and from junction to lead length 0.375 (9.5mm) P.C.B. mounted 1 1.40 Volts RATINGS AND CHARACTERISTIC CURVES 2