CD 892 ZL Series 5 000 h at 105°C · Long Life at High Temperature · High Ripple Current · Professional Power Supplies · Miniaturized CD 294 BW longer life CD 296 KC 105°C miniaturized size CD 293 BZ CD 892 ZL longer life CD 297 BB Item Characteristics Operating Temperature Range (°C) -25 ~ +105 Voltage Range (V) 400 ~ 450 Capacitance Range (µF) 47 ~ 1 500 Capacitance Tolerance (20°C, 120Hz) ± 20% Leakage Current (µA) After 5 minutes at 20°C application of rated voltage, leakage current is not more than 0,01CV or 1,5mA, whichever is smaller C: Nominal Capacitance (µF) V: Rated Voltage (V) Dissipation Factor (20°C, 120Hz) 400 Tan δ (max) 0,15 420 400 ~ 450 Z -25°C / Z +20°C 4 Useful Life 5 000h Lifetime Leakage Current Capacitance Change Dissipation Factor Condition: Applied Voltage Applied Current Applied Temperature Outlier Percentage 450 0,20 Rated Voltage (V) Stability at Low Temperature (Impedance Ratio at 120Hz) Snap-In Rated Voltage (V) Load Life >200 000h Endurance Test 3 000h Shelf Life 4 000h 1 000h Not more than specified value Not more than specified Not more than specified value value Not more than specified value Within ± 30% of initial value Within ± 20% of initial value Within ± 20% of initial value Within ± 20% of initial value Not more than 300% of specified value Not more than 200% of specified value Not more than 130% of specified value Not more than 200% of specified value UR UR UR UR UR = 0 IR 1,4 x IR IR IR = 0 IR = 0 105°C 40°C 105°C 105°C 105°C ≤ 1% ≤ 1% 0%, guaranteed IEC 60384 0% Multiplier for Ripple Current After test: UR to be applied for 30min >24h before measurement Multiplier for Lifetime Frequency Coefficient Lifetime Diagram 3.0 Frequency 50Hz 120Hz 1kHz 10kHz 100kHz Coefficient 0,80 1,00 1,14 1,14 1,20 IA ––– 2.5 IR CD 892 ZL Series 2.0 1.5 1.0 X32 0.5 0.0 40 X16 X8 X4 X2 X1 Lifetime Multiplier 50 60 70 80 90 100 110 TA (˚C) IA = actual ripple current at 120Hz, IR = rated ripple current at 120Hz, 105°C Multiplier of Useful Life as a function of ambient temperature and ripple current load 70 Assistance needed? Please contact Jianghai Europe GmbH +49 (0) 2151 652088-72 or [email protected] CD 892 ZL Series Ratings for CD 892 ZL Series (V) Rated Capacitance Max ESR 20°C, 120Hz Typ ESR 20°C, 120Hz Max Ripple Current 105°C, 120Hz (µF) (mΩ) (mΩ) (mArms) (mm) 4 233 2 426 1 989 1 326 1 105 904 603 603 603 510 510 424 424 424 424 356 293 293 293 293 199 199 199 166 166 133 2 210 1 769 1 769 1 474 1 206 982 700 700 680 424 390 5 644 5 644 2 653 2 653 2 653 1 474 1 474 1 206 1 206 1 206 804 804 680 565 565 474 390 323 323 323 265 265 221 177 2 350 1 340 1 035 690 575 471 314 314 314 266 266 221 221 221 221 185 153 153 153 153 130 130 130 108 108 90 1 100 690 690 575 471 500 350 350 340 221 195 2 890 2 890 1 327 1 327 1 327 737 737 603 603 603 402 402 341 286 286 241 200 165 165 165 135 135 115 100 390 560 580 730 820 860 1 110 1 110 1 100 1 150 1 260 1 310 1 180 1 300 1 650 1 750 2 000 2 300 2 000 2 150 3 300 3 800 3 500 4 200 3 700 4 250 710 720 720 810 850 1 100 1 200 1 200 1 300 1 600 1 800 350 420 640 600 800 870 860 940 950 900 1 050 1 100 1 310 1 400 1 500 2 100 2 400 2 700 2 800 3 000 3 300 3 100 3 500 3 800 22 x 20 22 x 25 22 x 30 25 x 30 25 x 35 30 x 30 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 35 35 x 40 40 x 40 35 x 45 30 x 80 35 x 70 35 x 50 40 x 40 35 x 100 40 x 80 40 x 70 40 x 80 40 x 75 40 x 100 25 x 30 22 x 40 35 x 30 25 x 30 25 x 45 25 x 50 30 x 45 35 x 35 30 x 50 30 x 55 35 x 60 20 x 25 22 x 25 22 x 35 22 x 30 25 x 30 25 x 40 30 x 30 25 x 45 30 x 35 30 x 30 25 x 55 30 x 45 35 x 40 35 x 40 40 x 40 35 x 60 35 x 70 35 x 70 40 x 70 45 x 45 40 x 100 40 x 80 40 x 90 40 x 100 47 82 100 150 180 220 330 390 400 (450) 2G 470 560 680 1 000 1 200 1 500 120 150 420 (470) 2X 180 220 270 330 390 470 680 47 100 180 220 450 (500) 2W 330 390 470 560 680 820 1 000 1 200 1 500 Size ØDxL Snap-In UR.DC (Surge Voltage) Code Customer specific products and adaptions on request. Assistance needed? Please contact Jianghai Europe GmbH +49 (0) 2151 652088-72 or [email protected] 71 Part Number System Order Code SMD, Radial, Snap-In EC R 1C Technology Terminal Type Rated Voltage Code EC = Electrolytric Capacitor SMD =V Radial = R 4V = 0G PC = Polymer Capacitor Snap-In = S 6,3V = 0J 2,5V = 0E PT 101 M Series Code Capacitance Code (in µF) Capacitance Tolerance CD 110 1,0 = 010 CD 261 2,2 = 2R2 +20 / -0% = R Radial: 10 = 100 +20 / -10% = V 100 = 101 10V = 1A CD 261X = QX 16V = 1C CD 262 = QM 0611 JE xxxxx Lead Form Size ØDxL for Specials only ±10% =K 4x7 CD 11GL = GL = LK 25 Terminal/ Pitch Size = M SMD: 0,47 = R47 ±20% = PT FF Taped = FF Terminal = T2 5x11,5 = 0511 Taped = FF 2,0mm = 20 35x80 +30 / -10% = Q Long Lead = LL 2,5mm = 25 45x100 = 45100 +50 / -10% = T Cut 5,0mm = CB 3,5mm = 35 Cut 4,5mm = CC 5,0mm = 50 6,3x11,5= 0611 20V = 1D CD 263 = BK 1 000 = 102 25V = 1E CD 269 = PH 10 000 = 103 35V = 1V CD 269L = HL Cut 4,0mm = CD 7,5mm = 75 = CE 10,0mm = 10 40V = 1G CD 281 = LL Cut 3,5mm 50V = 1H CD 281L = LH Cut 3,0mm = CF 12,5mm = 12 on request: alternative lead forms (Keyed Polarity, axial, 90° - angle, others) 63V = 1J CD 287 = GC 80V = 1K CD 28L = QL 100V = 2A CD 293 = BZ Snap-In: 160V = 2C CD 294 = BW 4,0mm Pin Length = T4 2 Pin 180V = 2K CD 295 = BC 6,3mm Pin Length = T6 3 Pin = P3 200V = 2D CD 296 = KC 4 Pin = P4 250V = 2E CD 297 = BB 5 Pin = P5 315V = 2F CD 299 = PG Soldering Pin = S4 on request: alternative pin types 350V = 2V CD 29D = HR 385V = 2J CD 29H = QH 400V = 2G CD 29L = QL 415V = 2P CD 891 = ZJ 420V = 2X CD 892 = ZL 450V = 2W CD 895 = ZK 500V = 2H 550V = 2Y = 0407 = 3580 = P2 preferred Polymer on request Technical Specification Radial Type Dimensions for loose, long-lead type (bulk) Order Code: LL L L≤7 L ≥ 11 ØD 3 4 5 6,3 8 5 6,3 8 F 1 1,5 2,0 2,5 3,5 2,0 2,5 3,5 Ø d 0,4 aMax 0,45 0,5 10 12,5 5,0 18 20 7,5 0,6 1,0 16 22 10,0 0,8 25 12,5 1,0 2,0 For diameter 20 pitch 7,5 on request. in mm Dimensions for loose, short cut leads (bulk) Order Code: CC (CB, CD, CE, CF) Straight Lead Bended Lead 2.5max preferred 8 Code CB CC CD CE CF l 5,0 ± 0,5 4,5 ± 0,5 4,0 ± 0,5 3,5 ± 0,5 3,0 ± 0,5 in mm Assistance needed? Please contact Jianghai Europe GmbH +49 (0) 2151 652088-72 or [email protected] Part Number System Dimensions for Ammopack taping Order Code: FF (FD) Case Range Dimensions Code ØD L (max) H ± 0,75 Ho ± 0,5 F +0,8 - 0,2 P ± 0,1 Form Form A F F 4~5 13 18,5 - 2,5 12,7 6,3 13 18,5 - 2,5 12,7 8 13 18,5 - 3,5 12,7 4~8 7 17,5 5 ~ 6,3 13 18,5 B F A Form B FF 16 B 12,7 8 22 20,0 10 22 18,5 5,0 A 12,5 27 18,5 - 15,0 FD 12,5 27 18,5 - 25,4 FF 16 27 18,5 - Form C C 7,5 30,0 in mm Technical Specification Snap-In Type Pin Type: Snap-In Order Code: T6, T4 Pin Type: Soldering Order Code: S4 T6, T4 Terminal T6 Pin Length 6,3 S4 T4 4,0 preferred Snap-In Terminal Order Code: P2, P3, P4 and Mounting Holes (Top view) P2 P3 Soldering Terminal Order Code: P5 P4 Positive P5 Terminal Negative Terminal Negative Terminal Mounting Holes Negative Terminal Mounting Holes 22,5 22,5 Mounting Holes P3 only as T4 Terminal available, P4 for Ø D ≥ 30mm, P5 for Ø D ≥ 40mm Assistance needed? Please contact Jianghai Europe GmbH +49 (0) 2151 652088-72 or [email protected] 9