CD 891 ZJ Series 4 000h at 85°C longer life CD 294 BW · Miniaturized 85°C 105°C CD 296 KC 105°C longer life CD 293 BZ CD 295 BC miniaturized size CD 891 ZJ Item Characteristics Operating Temperature Range (°C) -40 ~ +85 Voltage Range (V) 35 ~ 400 -25 ~ +85 450 ~ 500 Capacitance Range (µF) 68 ~ 15 000 Capacitance Tolerance (20°C, 120Hz) ± 20% Leakage Current (µA) After 5 minutes at 20°C application of rated voltage, leakage current is not more than 0,01CV or 1,5mA, whichever is smaller C: Nominal Capacitance (µF) V: Rated Voltage (V) Rated Voltage (V) Rated Voltage(V) Cap (µF) Snap-In 63 80~100 0,20 0,15 0,15 22 ~ 30 0,10 0,15 35 0,12 0,15 ≤ 2 700 Dissipation Factor (20°C, 120Hz) Stability at Low Temperature (Impedance Ratio at 120Hz) 35~50 3 300 ~ 4 700 0,25 0,20 0,15 5 600 ~ 6 800 0,30 0,20 0,20 ≥ 8 200 0,35 0,25 - Rated Voltage (V) 35 Z -25°C / Z +20°C 4 Z -40°C / Z +20°C 15 50~100 4 000h Leakage Current Capacitance Change Dissipation Factor Condition: Applied Voltage Applied Current Applied Temperature Outlier Percentage 250~400 3 6 8 Load Life >65 000h 450~500 4 10 Useful Life Lifetime 160~200 160~200 250~500 Ø (mm) - Endurance Test 2 000h Shelf Life 3 000h 1 000h Not more than specified value Not more than specified Not more than specified value value Not more than specified value Within ± 30% of initial value Within ± 15% of initial value Within ± 20% of initial value Within ± 15% of initial value Not more than 300% of specified value Not more than 150% of specified value Not more than 130% of specified value Not more than 150% of specified value UR UR = 0 UR UR UR IR 1,2 x IR IR IR = 0 IR = 0 85°C 40°C 85°C 85°C 85°C ≤ 1% ≤ 1% 0%, guaranteed IEC 60384 0% After test: UR to be applied for 30min >24h before measurement Multiplier for Ripple Current Multiplier for Lifetime Multiplier for Lifetime Frequency Coefficient Lifetime Diagram UR < 160V Lifetime Diagram UR ≥ 160V CD 891 ZJ Series IA 50Hz Rated Voltage (V) 2.0 2.5 Frequency 120Hz 1kHz 10kHz 100kHz ––– 2.0 ––– IR IR 1.5 1.5 ≤ 50 0,95 1,00 1,10 1,15 1,15 63 ~ 100 0,95 1,00 1,16 1,30 1,33 ≥ 160 0,95 1,00 1,20 1,50 1,55 1.0 1.0 0.5 0.0 X16 X8 X4 X2 X1 45 55 65 75 85 X16 0.5 Lifetime Multiplier IA = actual ripple current at 120Hz, 68 CD 891 ZJ Series IA 95 TA (˚C) 0.0 X8 X4 X2 X1 Lifetime Multiplier 45 55 65 75 85 IA = actual ripple current at 120Hz, 95 TA (˚C) IR = rated ripple current at 120Hz, 85°C IR = rated ripple current at 120Hz, 85°C Multiplier of Useful Life as a function of ambient temperature and ripple current load Multiplier of Useful Life as a function of ambient temperature and ripple current load Assistance needed? Please contact Jianghai Europe GmbH +49 (0) 2151 652088-72 or [email protected] CD 891 ZJ Series Ratings for CD 891 ZJ Series (Surge Voltage) Code (V) 35 (44) 1V 50 (63) 1H Rated Capacitance Max ESR 20°C, 120Hz Typ ESR 20°C, 120Hz Max Ripple Current 85°C, 120Hz (µF) (mΩ) (mΩ) (mArms) 71 59 47 47 31 120 100 100 71 71 47 81 57 57 48 40 41 34 23 74 61 43 32 28 230 166 91 91 91 43 1 300 283 196 160 160 125 120 100 60 603 293 199 135 110 90 2 926 1658 1 327 905 737 603 603 603 511 424 424 356 356 300 245 245 200 200 165 1 330 737 293 200 1 327 905 603 603 511 511 511 424 424 355 395 245 200 165 90 425 295 57 47 38 38 25 97 81 81 57 57 38 65 46 46 38 32 33 27 18 59 49 34 25 22 180 133 73 73 73 34 1 050 226 157 128 128 115 100 80 50 483 235 160 110 90 75 2 341 1 327 1 062 724 590 483 483 483 409 339 339 285 285 240 200 200 160 160 135 1 062 590 235 160 1 062 724 483 483 409 409 409 339 339 285 234 195 160 135 75 340 234 4 700 6 800 10 000 15 000 2 200 3 300 4 700 10 000 3 300 63 (79) 1J 80 (100) 1K 100 (125) 2A 200 (250) 2D 250 (300) 2E 4 700 5 600 6 800 8 200 10 000 15 000 2 700 3 300 4 700 8 200 10 000 1 000 1 200 2 200 4 700 120 470 680 1 000 1 500 1 800 2 200 3 300 330 680 1 000 1 500 1 800 2 200 68 120 150 220 270 330 400 (450) 2G 390 470 560 680 820 1 000 420 (470) 2X 1 200 150 270 680 1 000 150 220 330 450 (500) 2W 500 (550) 2H 390 470 560 680 820 1 000 1 200 2 200 470 680 2 200 2 600 2 820 3 200 3 300 1 600 2 000 2 000 2 400 2 400 3 200 2 680 2 600 2 600 2 700 2 900 3 500 4 000 4 400 2 600 2 700 3 300 4 200 4 500 1 500 1 600 2 200 2 200 2 200 3 400 1 050 1 700 2 300 2 600 3 100 3 700 3 750 3 800 4 200 1 300 2 300 3 000 3 800 4 400 4 600 550 800 900 1 100 1 300 1 600 1 600 1 520 1 800 2 400 2 100 2 000 2 300 2 500 2 700 2 600 3 100 3 200 3 500 940 1 420 2 500 3 200 900 1 100 1 650 1 650 1 800 1 800 1 700 2 200 2 200 2 300 2 300 2 500 3 100 5 000 6 000 2 300 2 500 Size ØDxL (mm) 22 x 30 25 x 30 25 x 40 30 x 30 30 x 35 20 x 25 22 x 30 25 x 25 25 x 30 30 x 25 25 x 50 25 x 30 22 x 50 25 x 35 25 x 40 25 x 50 35 x 35 35 x 40 35 x 50 25 x 35 22 x 45 25 x 55 35 x 50 35 x 50 22 x 30 22 x 30 22 x 55 25 x 40 30 x 30 30 x 50 22 x 25 25 x 30 22 x 45 25 x 40 30 x 40 25 x 50 35 x 40 35 x 50 35 x 60 22 x 30 25 x 50 30 x 40 30 x 50 35 x 45 35 x 50 22 x 20 25 x 25 22 x 30 30 x 30 25 x 40 22 x 50 30 x 40 35 x 30 30 x 40 30 x 50 35 x 40 30 x 50 35 x 40 35 x 45 30 x 70 35 x 50 35 x 55 40 x 60 35 x 80 25 x 40 30 x 30 35 x 50 35 x 70 22 x 40 25 x 45 30 x 40 35 x 35 25 x 55 30 x 45 35 x 35 30 x 50 35 x 40 35 x 50 35 x 50 35 x 60 35 x 80 40 x 100 45 x 100 35 x 55 35 x 70 Snap-In UR.DC Customer specific products and adaptions on request. Assistance needed? Please contact Jianghai Europe GmbH +49 (0) 2151 652088-72 or [email protected] 69 Part Number System Order Code SMD, Radial, Snap-In EC R 1C Technology Terminal Type Rated Voltage Code EC = Electrolytric Capacitor SMD =V Radial = R 4V = 0G PC = Polymer Capacitor Snap-In = S 6,3V = 0J 2,5V = 0E PT 101 M Series Code Capacitance Code (in µF) Capacitance Tolerance CD 110 1,0 = 010 CD 261 2,2 = 2R2 +20 / -0% = R Radial: 10 = 100 +20 / -10% = V 100 = 101 10V = 1A CD 261X = QX 16V = 1C CD 262 = QM 0611 JE xxxxx Lead Form Size ØDxL for Specials only ±10% =K 4x7 CD 11GL = GL = LK 25 Terminal/ Pitch Size = M SMD: 0,47 = R47 ±20% = PT FF Taped = FF Terminal = T2 5x11,5 = 0511 Taped = FF 2,0mm = 20 35x80 +30 / -10% = Q Long Lead = LL 2,5mm = 25 45x100 = 45100 +50 / -10% = T Cut 5,0mm = CB 3,5mm = 35 Cut 4,5mm = CC 5,0mm = 50 6,3x11,5= 0611 20V = 1D CD 263 = BK 1 000 = 102 25V = 1E CD 269 = PH 10 000 = 103 35V = 1V CD 269L = HL Cut 4,0mm = CD 7,5mm = 75 = CE 10,0mm = 10 40V = 1G CD 281 = LL Cut 3,5mm 50V = 1H CD 281L = LH Cut 3,0mm = CF 12,5mm = 12 on request: alternative lead forms (Keyed Polarity, axial, 90° - angle, others) 63V = 1J CD 287 = GC 80V = 1K CD 28L = QL 100V = 2A CD 293 = BZ Snap-In: 160V = 2C CD 294 = BW 4,0mm Pin Length = T4 2 Pin 180V = 2K CD 295 = BC 6,3mm Pin Length = T6 3 Pin = P3 200V = 2D CD 296 = KC 4 Pin = P4 250V = 2E CD 297 = BB 5 Pin = P5 315V = 2F CD 299 = PG Soldering Pin = S4 on request: alternative pin types 350V = 2V CD 29D = HR 385V = 2J CD 29H = QH 400V = 2G CD 29L = QL 415V = 2P CD 891 = ZJ 420V = 2X CD 892 = ZL 450V = 2W CD 895 = ZK 500V = 2H 550V = 2Y = 0407 = 3580 = P2 preferred Polymer on request Technical Specification Radial Type Dimensions for loose, long-lead type (bulk) Order Code: LL L L≤7 L ≥ 11 ØD 3 4 5 6,3 8 5 6,3 8 F 1 1,5 2,0 2,5 3,5 2,0 2,5 3,5 Ø d 0,4 aMax 0,45 0,5 10 12,5 5,0 18 20 7,5 0,6 1,0 16 22 10,0 0,8 25 12,5 1,0 2,0 For diameter 20 pitch 7,5 on request. in mm Dimensions for loose, short cut leads (bulk) Order Code: CC (CB, CD, CE, CF) Straight Lead Bended Lead 2.5max preferred 8 Code CB CC CD CE CF l 5,0 ± 0,5 4,5 ± 0,5 4,0 ± 0,5 3,5 ± 0,5 3,0 ± 0,5 in mm Assistance needed? Please contact Jianghai Europe GmbH +49 (0) 2151 652088-72 or [email protected] Part Number System Dimensions for Ammopack taping Order Code: FF (FD) Case Range Dimensions Code ØD L (max) H ± 0,75 Ho ± 0,5 F +0,8 - 0,2 P ± 0,1 Form Form A F F 4~5 13 18,5 - 2,5 12,7 6,3 13 18,5 - 2,5 12,7 8 13 18,5 - 3,5 12,7 4~8 7 17,5 5 ~ 6,3 13 18,5 B F A Form B FF 16 B 12,7 8 22 20,0 10 22 18,5 5,0 A 12,5 27 18,5 - 15,0 FD 12,5 27 18,5 - 25,4 FF 16 27 18,5 - Form C C 7,5 30,0 in mm Technical Specification Snap-In Type Pin Type: Snap-In Order Code: T6, T4 Pin Type: Soldering Order Code: S4 T6, T4 Terminal T6 Pin Length 6,3 S4 T4 4,0 preferred Snap-In Terminal Order Code: P2, P3, P4 and Mounting Holes (Top view) P2 P3 Soldering Terminal Order Code: P5 P4 Positive P5 Terminal Negative Terminal Negative Terminal Mounting Holes Negative Terminal Mounting Holes 22,5 22,5 Mounting Holes P3 only as T4 Terminal available, P4 for Ø D ≥ 30mm, P5 for Ø D ≥ 40mm Assistance needed? Please contact Jianghai Europe GmbH +49 (0) 2151 652088-72 or [email protected] 9