Silver Ball Matrix BGA Socket Features 42.600 A1 corner • Wide temperature range (-55C to +150C). • Current capability is 4A per pin. • Over 40GHz bandwidth @-1dB for edge pins. • Low and stable contact resistance for reliable production yield. • Highly compliant to accommodate wide co-planarity variations. • Capacitance under 0.15pF SM elastomer 49.225 TOP VIEW: lid removed 40 49.55 10 13 71.087 58.94 1.10 12.10 18.50 36.225 8.863 2 7.50 2.50 2.50 36.225 Description: Socket Drawing Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. SM-BGA-9024 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Material <not specified> Finish: Weight: 178.19 STATUS: Released SHEET: 1 OF 5 DRAWN BY: V. Panavala SCALE: 1:1 FILE: SM-BGA-9024 Dwg DATE: 2/6/2013 REV. A 42.600 6mm Max component Height Lid open Area 36.225 40 29.60(x4) 2.5mm Max Component Height 14.80 (x4) 2X A1 corner 0.85 THRU ALL Non-Plated Hole 14.3225 14.80 (x4) 47.225 0.51 pad 11.7825 22.613 0.80 8X 1.70±0.10 THRU ALL Non-Plated Hole 4 28 R4 (x4) 1mm Max component Height 16.8625±0.0350 (x8) 42.60 Target PCB Recommendations Total thickness: 1.6mm min. Plating: Gold or Solder finish PCB Pad height: same or higher than solder mask Description: Recommended PCB layout Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. SM-BGA-9024 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Material <not specified> Finish: Weight: 178.19 STATUS: Released SHEET: 2 OF 5 DRAWN BY: V. Panavala SCALE: 2:1 FILE: SM-BGA-9024 Dwg DATE: 2/6/2013 REV. A Compatible BGA device D Y A X 1.16 REF 30.80 (x4) 26.80(x4) b 0.08 Z 0.15 Z X Y 0.15 Z E 0.80 typ. A1 29.60 (x4) 0.50 1.30 DIM A A1 b D E e 1. Dimensions are in millimeters. 2. Interpret dimensions and tolerances per ASME Y14.5M-1994. 3. Dimension b is measured at the maximum solder ball diameter, parallel to datum plane Z. 4. Datum Z (seating plane) is defined by the spherical crowns of the solder balls. 5. Parallelism measurement shall exclude any effect of mark on top surface of package. MIN 1.00 0.5 0.45 31.00 BSC 31.00 BSC 0.80 MAX 4.00 0.6 0.55 38x38 Array Description: Compatible BGA Device Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. SM-BGA-9024 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Material <not specified> Finish: Weight: 178.19 STATUS: Released SHEET: 3 OF 5 DRAWN BY: V. Panavala SCALE: 1:1 FILE: SM-BGA-9024 Dwg DATE: 2/6/2013 REV. A ITEM NO. 17 1 16 2 3 4 5 6 7 8 9 10 11 11 12 2 13 14 9 3 15 10 1 16 17 18 18 19 15 Description Material Hinge Pin and Snap Ring, 3mm OD, 30mm long, 1045 Stl, Blk Oxide Screw, M3 x 12mm, Low Head Cap, SS Precision Compression Spring, Zinc-Plated Music Wire, 1/2" Length,0.12" OD, .016" Wire SM Socket Base clamshell 31mm CBT Black Anodized backing plate 31mm Dowel Pin, 1/32" x 3/16", SS #0-80 x 0.5, SH Cap Screw Latch Spring Clamshell lid assembly Socket Lid Heat sink Compression Screw M24 threads BGA1290 31x31mm, 0.8mm pitch, 38x38 array Ball guide BGA1290 31x31mm, 0.8mm pitch, 38x38 array PCB 31x31mm, 0.8mm pitch, 38x38 array BGA1290 BGA1290 31x31mm, 0.8mm pitch, 38x38 array Fan 40X10MM 12VDC 1.6W 9.9CFM Screw, #4-40 X 7/8", Cap Compression plate 31mm no shift with thermocouple hole Alignment Pin 1/32" dia. x 1/8" lng AISI 1045 Steel, cold drawn 18-8 Stainless Steel Zinc Plated Music Wire 7075-T6 Aluminum Alloy 7075-T6 Aluminum Alloy Chrome Stainless Steel Material <not specified> 7075-T6 Aluminum Alloy Steel Music Wire 7075-T6 Aluminum Alloy 7075-T6 Aluminum Alloy Silmat Kapton Polyimide/Cirlex FR4 FR4 Standard Material <not specified> Alloy Steel 7075-T6 Aluminum Alloy Chrome Stainless Steel 4 20 15 6 13 3 (x8) posts 4 (x8) 8 R1.6 All corners 12 5 23.50 14 7 #19 NOT SHOWN 2 20 R1.60 All Inside corners 6 (x8) 3.50 2 (x4) posts 1.8 38.725 5.5 Description: Socket assembly Insulation Plate Specification Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. SM-BGA-9024 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Material <not specified> Finish: Weight: 178.19 STATUS: Released SHEET: 4 OF 5 ENG: REQ. ENG. INITIALS SCALE: 1.3:1 FILE: SM-BGA-9024 Dwg DATE: 2/6/2013 REV. A A1 corner D D Thermo couple opening 2 SECTION D-D Description: Socket Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. SM-BGA-9024 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Material <not specified> Finish: Weight: 178.19 STATUS: Released SHEET: 5 OF 5 DRAWN BY: V. Panavala SCALE: 1:1 FILE: SM-BGA-9024 Dwg DATE: 2/6/2013 REV. A