ABM8AIG - Abracon

Automotive Grade Ceramic SMD Ultra Miniature Crystal
ABM8AIG
Pb
RoHS / RoHS II Compliant
3.2 x 2.5 x 0.8mm
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable
FEATURES:
• Low profile
• AEC-Q200 qualified
• Ceramic package hermetically seam sealed assures high precision and reliability.
• Extended temperature -40°C to +125°C for automotive/industrial applications
• Suitable for RoHS reflow profile
• 100 times drop test from 150cm, suitable for keyless entry application
APPLICATIONS:
• Automotive electronics
• Industrial electronics
STANDARD SPECIFICATIONS:
Parameters
Minimum
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Typical
Maximum
Units
54.000
MHz
-40
-40
-50
+125
+125
+50
ºC
ºC
ppm
See options
-100
+100
ppm
See options
Ω
12.000 – 15.999MHz
16.000 – 19.999MHz
20.000 – 29.999MHz
30.000 – 39.999MHz
40.000 –54.000MHz
12.000
Notes
Fundamental, AT-cut
100
70
50
40
35
7
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
18
Drive Level
10
Aging
-3
Insulation Resistance
See options
pF
pF
100
µW
+3
ppm
500
MΩ
Standard (See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
OPTIONS AND PART IDENTIFICATION:
AND PART IDENTIFICATION: (Left blank if standard)
ABM8AIG -
MHz -
-
-
Frequency in MHz
Please specify the frequency
in MHz.
e.g. 14.31818MHz
Packaging
Blank: Bulk
T: Tape & Reel
Freq. Stability
Blank: ± 100 ppm
Z*: ± 50 ppm
*: for option ”D” (-40
~ +85°C) only.
Load Capacitance (pF)
Blank: 18pF
If not standard, please
specify CL in pF or S for
series
Custom ESR if other
than standard
R□
□: Specify a value in Ω
(e.g.: R80)
ABRACON IS
ISO9001:2008
CE RTIFIED
-
Operating Temp.
Blank: -40°C ~ +125°C
D: -40°C ~ +85°C
J: -40°C ~ +105°C
Freq. Tolerance
Blank: ± 50 ppm
4: ± 30 ppm
2: ± 20 ppm
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 12.19.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Automotive Grade Ceramic SMD Ultra Miniature Crystal
ABM8AIG
Pb
RoHS / RoHS II Compliant
3.2 x 2.5 x 0.8mm
OUTLINE DIMENSIONS:
Recommended Land Pattern
Dimensions: mm
REFLOW PROFILE:
ABRACON IS
ISO9001:2008
CE RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 12.19.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Automotive Grade Ceramic SMD Ultra Miniature Crystal
ABM8AIG
Pb
RoHS / RoHS II Compliant
3.2 x 2.5 x 0.8mm
TAPE & REEL:
Packaging: 1000pcs/reel
Dimensions: mm
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 12.19.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Pierce Analyzer System (PAS)
Advanced Board Characterization Service
Abracon PAS System enables us to offer Automotive, Medical, and Industrial application customers a
comprehensive, automated assessment of the Pierce Oscillator loop, in concert with the customers selected Quartz
Crystal. The PAS System Circuit Analysis report is ideally suited for PPAP documentation, design history
reporting, and overall assurance of a reliable optimized circuit.
Features:
• Circuit characterization; providing best possible match between Quartz Crystal, oscillator loop and
associated components
• Eliminates probability of oscillator start-up issues related to inadequate design or marginal component
performance
• Eliminates production launch issues related to crystal oscillator based timing circuit
• Solves design margin uncertainty
Deliverables:
A detail Report encompassing:
• Stand alone Quartz Crystal characteristics including:
- Motional parameters (Cm, Lm, ESR & C0)
- Narrow Band Frequency Response Plot
- Wide Band Frequency Response Plot
- Admittance versus Susceptance plot
- Frequency dependence versus load capacitance plot
• Oscillator loop characteristics including:
- Initial frequency accuracy and drive level as seen by the crystal with measured ESR
- Worst case projected drive level with maximum specified ESR
- Safety Factor of the oscillator loop under both typical and maximum ESR
- Recommendation on proper component selection (C1, C2 & Rs when applicable) for
best compromise with respect to Safety Factor and Frequency accuracy
- Recommendation on the Abracon Crystal part # with proper plating load and other key
attributes to enable the most robust design, specific to the µcontroller/processor implemented
Ordering information:
PAS-BC1WK
PAS-BC2WK
PAS-BC3WK
Analysis & Report with 1-week maximum lead-time
Analysis & Report with 2-week maximum lead-time
Analysis & Report with 3-week maximum lead-time
For detailed information, click here:
For additional information, please contact at: [email protected]
ABRACON IS
ISO9001:2008
CE RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 12.19.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com