View Datasheet

Automotive and Industrial Grade
HCMOS SMD Crystal Oscillator
ASDAIG
Pb RoHS/RoHS II Compliant
2.5 x 2.0 x 0.95mm
| | | | | | | | | | | | | | |
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable
FEATURES:
• Ultra Miniature size and low profile
• AEC-Q200 qualified
• Seam sealed ceramic package assures high precision and reliability.
• Extended temperature -40°C to +125°C for automotive/industrial applications
• Suitable for RoHS reflow profile
APPLICATIONS:
• Automotive electronics
• Industrial electronics
STANDARD SPECIFICATIONS
Parameters
Frequency Range
Operating Temperature
Storage Temperature
Overall Frequency Stability
Supply Voltage (Vdd)
Minimum
20
-40
-55
-100
+3.135
+2.85
+2.375
+1.71
Vdd = 3.3 V
Input Current (Idd)
Into 15pF load
Vdd = 3.0 V
Vdd = 2.5 V
Vdd = 1.8 V
Symmetry @ 1/2Vdd
Output Load:
Output Voltage (VOH):
Output Voltage (VOL):
40
Vdd = 3.0 V
Vdd = 2.5 V
Vdd = 1.8 V
ABRACON IS
ISO9001:2008
CE
CERTIFIED
RTIFIED
+3.3
+3.0
+2.5
+1.8
4
9
3.5
8
3
7
2
4
0.9* Vdd
Vdd = 3.3 V
Rise and Fall Time
(Tr/Tf):
Typical
2.5
2
2.5
2
3
2.5
3.5
3
Maximum
48
+125
+125
+100
+3.465
+3.15
+2.625
+1.89
7
13
6
12
5
10
4
7
60
15
0.1* Vdd
6
4
6
4
7
5
8
6
Units
MH z
°C
°C
ppm
V
mA
mA
mA
mA
%
pF
V
V
ns
ns
ns
ns
Notes
See options
See options
Standard
Option “1”
Option “2”
Option “3”
20.000~39.999 MHz
40.000~48.000 MHz
20.000~39.999 MHz
40.000~48.000 MHz
20.000~39.999 MHz
40.000~48.000 MHz
20.000~39.999 MHz
40.000~48.000 MHz
See option
CMOS
20.000~39.999 MHz
40.000~48.000 MHz
20.000~39.999 MHz
40.000~48.000 MHz
20.000~39.999 MHz
40.000~48.000 MHz
20.000~39.999 MHz
40.000~48.000 MHz
Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.20.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Automotive and Industrial Grade
HCMOS SMD Crystal Oscillator
ASDAIG
Pb RoHS/RoHS II Compliant
2.5 x 2.0 x 0.95mm
| | | | | | | | | | | | | | |
(Continued)
Vdd = 3.3 V
Vdd = 3.0 V
Start-up Time:
Vdd = 2.5 V
Vdd = 1.8 V
Tri-state function:
Vdd = 3.3 V
Phase Jitter
(12kHz to 20MHz)
Vdd = 3.0 V
Vdd = 2.5 V
Vdd = 1.8 V
Period Jitter RMS
Aging at 25°C/year
Disable Current:
Vdd = 3.3 V
Vdd = 3.0 V
Vdd = 2.5 V
Vdd = 1.8 V
6
10
5
10
6
10
5
10
6
10
5
10
6
10
5
10
"1" (VIH≥0.7*Vdd) or Open: Oscillation;
"0" (VIH<0.3*Vdd) : No oscillation/Hi Z
0.4
1.0
0.3
1.0
0.4
1.0
0.3
1.0
0.5
1.0
0.5
1.0
0.5
1.0
0.5
1.0
3.0
5.0
3.0
5.0
3.0
5.0
3.0
5.0
-5
+5
10
ms
ms
ms
ms
20.000~39.999 MHz
40.000~48.000 MHz
20.000~39.999 MHz
40.000~48.000 MHz
20.000~39.999 MHz
40.000~48.000 MHz
20.000~39.999 MHz
40.000~48.000 MHz
20.000~39.999 MHz
40.000~48.000 MHz
20.000~39.999 MHz
40.000~48.000 MHz
20.000~39.999 MHz
40.000~48.000 MHz
20.000~39.999 MHz
40.000~48.000 MHz
ps
ps
ps
ps
ps
20.000~48.000 MHz
ppm
µA
PART IDENTIFICATION:
ASDAIG
-
-
MHz -
-
-
Packaging
Blank: Bulk
T: 1000pcs/Reel
T3: 3000pcs/Reel
Supply Voltage
Blank: 3.3V±5%
1: 3.0V±5%
2: 2.5V±5%
3: 1.8V±5%
Freq. in MHz
e.g. 24.576MHz
26.000MHz
ABRACON IS
ISO9001:2008
CE
CERTIFIED
RTIFIED
Operating Temp.
Blank: -40°C ~ +125°C
L: -40°C ~ +85°C
X: -40°C ~ +105°C
Overall Freq.
Stability
Blank:±100ppm
C*: ±50ppm
*: For option “L”
(-40 ~ +85°C) only
Duty Cycle
Blank : 40/60% @ 1/2Vdd
S: 45/55% @ 1/2Vdd
Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.20.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Automotive and Industrial Grade
HCMOS SMD Crystal Oscillator
ASDAIG
Pb RoHS/RoHS II Compliant
2.5 x 2.0 x 0.95mm
| | | | | | | | | | | | | | |
OUTLINE DIMENSIONS
TAPE & REEL T=Tape and reel (3,000pcs/reel)
Packaging:
Pin
1
2
3
4
T: 1000pcs/reel
T3: 3000pcs/reel
Function
Tri-State
GND/Case
Output
Vdd
Recommended Land Pattern
Note1: Recommend using an
approximately 0.01uF
bypass capacitor between
PIN 2 and 4.
Dimensions: inches (mm)
Dimensions: mm
REFLOW PROFILE
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated,
Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application
requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme
operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE
CERTIFIED
RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.20.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Pierce Analyzer System (PAS)
Advanced Board Characterization Service
Abracon PAS System enables us to offer Automotive, Medical, and Industrial application customers a
comprehensive, automated assessment of the Pierce Oscillator loop, in concert with the customers selected Quartz
Crystal. The PAS System Circuit Analysis report is ideally suited for PPAP documentation, design history
reporting, and overall assurance of a reliable optimized circuit.
Features:
• Circuit characterization; providing best possible match between Quartz Crystal, oscillator loop and
associated components
• Eliminates probability of oscillator start-up issues related to inadequate design or marginal component
performance
• Eliminates production launch issues related to crystal oscillator based timing circuit
• Solves design margin uncertainty
Deliverables:
A detail Report encompassing:
• Stand alone Quartz Crystal characteristics including:
- Motional parameters (Cm, Lm, ESR & C0)
- Narrow Band Frequency Response Plot
- Wide Band Frequency Response Plot
- Admittance versus Susceptance plot
- Frequency dependence versus load capacitance plot
• Oscillator loop characteristics including:
- Initial frequency accuracy and drive level as seen by the crystal with measured ESR
- Worst case projected drive level with maximum specified ESR
- Safety Factor of the oscillator loop under both typical and maximum ESR
- Recommendation on proper component selection (C1, C2 & Rs when applicable) for
best compromise with respect to Safety Factor and Frequency accuracy
- Recommendation on the Abracon Crystal part # with proper plating load and other key
attributes to enable the most robust design, specific to the µcontroller/processor implemented
Ordering information:
PAS-BC1WK
PAS-BC2WK
PAS-BC3WK
Analysis & Report with 1-week maximum lead-time
Analysis & Report with 2-week maximum lead-time
Analysis & Report with 3-week maximum lead-time
For detailed information, click here:
For additional information, please contact at: [email protected]
ABRACON IS
ISO9001:2008
CE RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 12.20.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com