Automotive and Industrial Grade Ultra Miniature SMD VC/TCXO ASVTXAIG-12/ASTXAIG-12 series Pb RoHS/RoHS II Compliant 2.5 x 2.0 x 0.9mm | | | | | | | | | | | | | | | Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: APPLICATIONS: • Automotive electronics • Industrial electronics • Ultra Miniature size and low profile • AEC-Q200 qualified • Low current consumption <2.5mA • Vc function ideal for PLL application • Suitable for RoHS complaint reflow • Low phase noise STANDARD SPECIFICATIONS Parameters Frequency Range Standard Frequencies Operating Temperature Storage Temperature Frequency Stability ∆f/f0 vs Tolerance (@+25°C) Temperature (ref. to +25°C) Supply Voltage Change (Vdd±5%) Load Change (ZL±10%) Control Voltage (Vcon) (ASVTXAIG-12 only) Supply Voltage (Vcc) Aging (first year @+25±2°C) Supply Current (Icc) Startup Time Frequency Tuning Range (ASVTXAIG-12 only) Vcon Input Impedance (ASVTXAIG-12 only) Frequency Tuning Transition Output Voltage Harmonics Load Waveform Minimum Typical Maximum 13 52 13, 16.368, 16.369, 19.2, 26, 38.4, 40, 52 -40 +85 -40 +85 -2.0 -1.0 -0.2 +2.0 +1.0 +0.2 -0.2 +0.2 +0.4 +2.4 +2.85 +2.66 -1.0 +3.0 +2.8 ±8.0 MHz MHz °C °C ppm Notes See option (Table 1) +25°C, Vcon=1.4V After 2 time reflow See option (Table 1) V +3.15 +2.94 +1.0 2.0 2.0 ppm mA ms ±15 ppm 500 0.8 Units V Option A Option B kΩ Positive 10kΩ//10pF Clipped Sine Wave -5 . 0 Vp-p d Bc Phase Noise @ 19.2MHz 100Hz offset from the carrier -115 -105 1kHz offset from the carrier -135 -130 10kHz offset from the carrier -150 -144 ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED dB/Hz Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.12.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Automotive and Industrial Grade Ultra Miniature SMD VC/TCXO ASVTXAIG-12/ASTXAIG-12 series Pb RoHS/RoHS II Compliant 2.5 x 2.0 x 0.9mm | | | | | | | | | | | | | | | PART IDENTIFICATION: ASVTXAIG-12 or ASTXAIG-12 - - MHz - Vdd (V) A: 3.0V±5% B: 2.8V±5% - Packaging Blank: Bulk T: 1,000pcs/reel Frequency in MHz Please specify the frequency in MHz. e.g. 19.200MHz 26.000MHz Table 1: Frequency Stability vs Operating Temperature ±1.0ppm ±1.5ppm ±2.0ppm -40°C ~ +85°C I10* I15 I20 ±2.5ppm I25 *Please contact Abracon for availability RECOMMENDED TEST CIRCUIT ASTXAIG-12 ASVTXAIG-12 ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.12.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Automotive and Industrial Grade Ultra Miniature SMD VC/TCXO ASVTXAIG-12/ASTXAIG-12 series Pb RoHS/RoHS II Compliant 2.5 x 2.0 x 0.9mm | | | | | | | | | | | | | | | OUTLINE DIMENSIONS Recommended Land Pattern ASTXAIG-12 TCXO ASVTXAIG-12 VCTCXO Note1: It is recommended that a by-pass capacitor of 0.01uF value be placed between pin #6 and pin #3 and an AC-coupling capacitor of the same value be placed in series with pin#4 for optimal performance. For ASTXAIG-12, please connect pin #1 and #3 to GND. Dimensions: inches (mm) Note2: Pin#2 and Pin#5 should be left floating (No Connect = N.C.) REFLOW PROFILE ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.12.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Automotive and Industrial Grade Ultra Miniature SMD VC/TCXO ASVTXAIG-12/ASTXAIG-12 series Pb RoHS/RoHS II Compliant 2.5 x 2.0 x 0.9mm | | | | | | | | | | | | | | | TAPE & REEL Packaging: T: 1000pcs/reel Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.12.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Pierce Analyzer System (PAS) Advanced Board Characterization Service Abracon PAS System enables us to offer Automotive, Medical, and Industrial application customers a comprehensive, automated assessment of the Pierce Oscillator loop, in concert with the customers selected Quartz Crystal. The PAS System Circuit Analysis report is ideally suited for PPAP documentation, design history reporting, and overall assurance of a reliable optimized circuit. Features: • Circuit characterization; providing best possible match between Quartz Crystal, oscillator loop and associated components • Eliminates probability of oscillator start-up issues related to inadequate design or marginal component performance • Eliminates production launch issues related to crystal oscillator based timing circuit • Solves design margin uncertainty Deliverables: A detail Report encompassing: • Stand alone Quartz Crystal characteristics including: - Motional parameters (Cm, Lm, ESR & C0) - Narrow Band Frequency Response Plot - Wide Band Frequency Response Plot - Admittance versus Susceptance plot - Frequency dependence versus load capacitance plot • Oscillator loop characteristics including: - Initial frequency accuracy and drive level as seen by the crystal with measured ESR - Worst case projected drive level with maximum specified ESR - Safety Factor of the oscillator loop under both typical and maximum ESR - Recommendation on proper component selection (C1, C2 & Rs when applicable) for best compromise with respect to Safety Factor and Frequency accuracy - Recommendation on the Abracon Crystal part # with proper plating load and other key attributes to enable the most robust design, specific to the µcontroller/processor implemented Ordering information: PAS-BC1WK PAS-BC2WK PAS-BC3WK Analysis & Report with 1-week maximum lead-time Analysis & Report with 2-week maximum lead-time Analysis & Report with 3-week maximum lead-time For detailed information, click here: For additional information, please contact at: [email protected] ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.12.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com