Configurable High Performance SMD TCXO/VCTCXO ASGTX ESD Sensitive Pb RoHS/RoHS II Compliant 9.0 x 7.0 x 2.24 mm OVERVIEW: ASGTX temperature compensated Crystal Oscillators are designed to accommodate a broad breadth of Precision TCXO requirements, without NRE and extended lead-times. This oscillator series is designed and manufactured by Abracon Corporation and is available to order from 1pc to high volume production quantities. • 1-5 day quick-turn availability of a TCXO/VCTCXO with LVCMOS output, Any frequency between 10MHz & 250MHz For example, if a reference oscillator requirement calls out 49.7521MHz; ±1.00 ppm TCXO/VCTCXO with LVCMOS output, ASGTX can be configured and shipped within 1-5 days and in most cases, same day if order is received before noon. Customers with low-to-mid annual volume requirements find it difficult to procure custom frequency TCXO/VCTXCO’s without costly NRE charges and/or long lead-times (> 12 weeks). • 1-5 day quick turn availability of a TCXO/VCTXCO requiring LVDS or LVPECL Differential output, Any frequency between 10MHz to 1.50GHz ASGTX is available with either LVDS or LVPECL output, from 10MHz to 1.50GHz; at any desired frequency, such as 149.875MHz, 1.00GHz, 1.5GHz, etc. with as tight as ±1.00 ppm stability over temperature. No other solution in the marketplace currently offers such capability, especially in a small form-factor of 9.0x7.0x2.24 mm. ASGTX is suitable for a wide variety of precision timing applications where TCXO/VCTXO’s are typically employed. In addition, for high frequency LO requirements, traditionally customers have relied on SAW based oscillators. Such devices are only available at a few fixed frequencies, such as 915MHz, 1.0GHz, etc. They are typically in 9x14mm or bigger packages and vary as much as ±100 ppm over temperature. Although ASGTX series will be slightly less favorable in phase noise performance compared to SAW based oscillators, it offers the following key advantages: o ±1.00 ppm stability over -30ºC to +70ºC & ±2.00 ppm stability over -40ºC to +85ºC o Any carrier frequency between 10MHz & 1.50GHz o LVCMOS Output (10MHz to 250MHz) or LVDS / LVPECL Output (10MHz to 1.50GHz) o Small form-factor of 9.0x7.0x2.24 mm o No NRE or lead-time FEATURES: • 10MHz to 1.50GHz, any Carrier Frequency in differential mode (LVDS or LVPECL) • 10MHz to 250MHz, any Carrier Frequency in LVCMOS mode • -40ºC to +85ºC operating temperature range • ±1.0ppm stability over -30ºC to +70ºC and ±2.0ppm stability over -40ºC to +85ºC • Minimum guaranteed pull ability of ± 10ppm in VCTCXO mode • Good Phase Noise, excellent Harmonics and Spurious content • Guaranteed rms jitter of 1.80ps maximum @ 1.50GHz carrier (LVDS mode) • Immediate availability, 5-day maximum lead-time for small quantities ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED APPLICATIONS: • 40G & 100G Ethernet • WiMax, • LTE, BTS • CATV, LAN, LMDS • Point-to-Point communication networks 2 Faraday, Suit#B, Irvine, California 92618 Revised: 10.16.14 tel:949-546-8000 | fax:949-546-8001 Visit www.abracon.com for Terms & Conditions of Sale Configurable High Performance SMD TCXO/VCTCXO ASGTX Pb RoHS/RoHS II Compliant 9.0 x 7.0 x 2.24 mm KEY ELECTRICAL SPECIFICATIONS: Parameters LVCMOS Frequency: Minimum 10 LVDS LVPECL Operating Temperature: Storage Te mperature: Frequency Stability: Typical Maximum 250 Units 10 1500 MHz 10 -40 -40 1500 +85 +85 °C °C Notes ≤ ±1.00 -1.50 +1.50 ppm 1 hour after reflow Initial Set Tolerance Stability over -30°C to +70°C Option “1” -1.00 +1.00 operating ppm Option “2” -2.00 +2.00 temperature* -40°C to +85°C ** Aging @ 25ºC after one year -1.00 +1.00 ppm Supply Voltage (Vdd): 3.135 3.300 3.465 V Startup Time: 3 ms Control Voltage***: 0 Vdd V In VCTCXO Mode Frequency Pull: ±10 ppm Phase jitter RMS [ tjit( ) ] **** <1.00 1.80 ps Frequency dependent (12kHz to 20MHz) Notes * Relative to measured frequency post reflow ** Please contact Abracon for ±1.00 ppm frequency stability over -40°C to +85°C *** Center Control Voltage value is either 1.28V ±0.20V or, 1.55V ±0.20V for the device to be with-in ±1.50 ppm of final frequency, 1-hour post reflow **** 1.8ps max is guaranteed for LVCMOS and LVDS output modes. For LVPECL mode at carrier frequency greater than 1.289GHz, the maximum RMS jitter is 3.0ps Key Electrical Specifications – LVCMOS Parameters Supply Current (Idd): Output Load: Output Logic Level: Rise Time (Tr): Fall Time (Tf): Duty Cycle: ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Minimum VOH VOL 0.9*Vdd 45 Typical Maximum 45 15 0.1*Vdd 1000 1 0 00 55 Units Notes mA Frequency dependent pF V V ps ps % @ 1/ 2V d d 2 Faraday, Suit#B, Irvine, California 92618 Revised: 10.16.14 tel:949-546-8000 | fax:949-546-8001 Visit www.abracon.com for Terms & Conditions of Sale Configurable High Performance SMD TCXO/VCTCXO ASGTX Pb RoHS/RoHS II Compliant 9.0 x 7.0 x 2.24 mm Key Electrical Specifications – LVPECL Parameters Minimum Typical Supply Current (Idd) VOH VOL Output Logic Level Rise Time (Tr): Fall Time (Tf): Differential Duty Cycle: Vdd-1.03 Vdd-1.85 45 Maximum Units 60 mA Vdd-0.60 Vdd-1.60 350 350 55 V V ps ps % Maximum Units 40 mA Notes With typical LVPECL output termination DODCLVPECL Key Electrical Specifications – LVDS Parameters Minimum Typical Supply Current (Idd) Differential Output Voltage (VOD) VOD Magnitude Change (∆VOD) Offset Voltage (VOS) VOS Magnitude Change (∆VOS) Rise Time (Tr): Fall Time (Tf): Differential Duty Cycle: 175 350 50 1.25 50 350 450 55 45 mV mV V mV ps ps % Notes With typical LVDS output termination ODCLVDS OPTIONS & PART IDENTIFICATION: ASGTX- Output Type C = LVCMOS P = LVPECL D = LVDS C = LVCMOS P = LVPECL D = LVDS ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED - Frequency in MHz Please specify the Frequency in MHz e.g. 100.000 MHz MHz - - Freq. Stability 1 = ±1ppm over -30 to +70°C 2 = ±2ppm over -40 to +85°C Packaging Blank = Bulk (Qty < 250pcs) T = 1000pcs/Reel T2 = 250pcs/Reel Any Carrier Frequency between 10MHz minimum to 250MHz maximum Any Carrier Frequency between 10MHz minimum to 1.50GHz maximum Any Carrier Frequency between 10MHz minimum to 1.50GHz maximum 2 Faraday, Suit#B, Irvine, California 92618 Revised: 10.16.14 tel:949-546-8000 | fax:949-546-8001 Visit www.abracon.com for Terms & Conditions of Sale Configurable High Performance SMD TCXO/VCTCXO ASGTX Pb RoHS/RoHS II Compliant 9.0 x 7.0 x 2.24 mm | TYPICAL PHASE NOISE & JITTER CHARACTERISTICS With LVCMOS Output; 10MHz Carrier With LVDS Output; 10MHz Carrier With LVCMOS Output; 25MHz Carrier With LVDS Output; 25MHz Carrier ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED 2 Faraday, Suit#B, Irvine, California 92618 Revised: 10.16.14 tel:949-546-8000 | fax:949-546-8001 Visit www.abracon.com for Terms & Conditions of Sale | | Configurable High Performance SMD TCXO/VCTCXO ASGTX Pb RoHS/RoHS II Compliant 9.0 x 7.0 x 2.24 mm | TYPICAL PHASE NOISE & JITTER CHARACTERISTICS With LVCMOS Output; 50MHz Carrier With LVCMOS Output; 120MHz Carrier ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED With LVDS Output; 50MHz Carrier With LVPECL Output; 500MHz Carrier 2 Faraday, Suit#B, Irvine, California 92618 Revised: 10.16.14 tel:949-546-8000 | fax:949-546-8001 Visit www.abracon.com for Terms & Conditions of Sale | | Configurable High Performance SMD TCXO/VCTCXO ASGTX Pb RoHS/RoHS II Compliant 9.0 x 7.0 x 2.24 mm | TYPICAL PHASE NOISE & JITTER CHARACTERISTICS With LVDS Output; 1.00GHz Carrier With LVDS Output; 1.2890625GHz Carrier With LVDS Output; 1.50GHz Carrier Carrier 10.00MHz 25.00MHz 50.00MHz 120.00MHz 500.00MHz 1.00GHz 1.2890625GHz 1.50GHz ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED RF Output LVDS LVDS LVDS LVCMOS LVPECL LVDS LVDS LVDS rms Phase Jitter 992 fs 774 fs 768 fs 1.1 ps 956 fs 911 fs 1.03 ps 1.55 ps Integration Bandwidth 12kHz to 5MHz 12kHz to 5MHz 12kHz to 10MHz 12kHz to 20MHz 12kHz to 20MHz 12kHz to 20MHz 12kHz to 20MHz 12kHz to 20MHz 2 Faraday, Suit#B, Irvine, California 92618 Revised: 10.16.14 tel:949-546-8000 | fax:949-546-8001 Visit www.abracon.com for Terms & Conditions of Sale | | Configurable High Performance SMD TCXO/VCTCXO ASGTX Pb RoHS/RoHS II Compliant 9.0 x 7.0 x 2.24 mm | FREQUENCY STABILITY VS. TEMPERATURE FREQUENCY PULL VS. CONTROL VOLTAGE (VCTCXO MODE) ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED 2 Faraday, Suit#B, Irvine, California 92618 Revised: 10.16.14 tel:949-546-8000 | fax:949-546-8001 Visit www.abracon.com for Terms & Conditions of Sale | | Configurable High Performance SMD TCXO/VCTCXO ASGTX Pb RoHS/RoHS II Compliant 9.0 x 7.0 x 2.24 mm OUTLINE DIMENSION: LVCMOS output Pin # 1 2 3 4 5 6 Pin Description TCXO VCTCXO N/C (1) By-Pass (2) Vc (3) GND RF Output N/C (1) Vdd N/C (1) = Please leave these pins electrically floating on the end-PCB By-Pass (2) = In TCXO configuration, it is recommended that a 1,000pF COG by-pass capacitor is connected between Pin#2 and GND Vc (3) = Please connect external voltage to pull the oscillator frequency Recommended Land Pattern Dimensions: inches [mm] ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED 2 Faraday, Suit#B, Irvine, California 92618 Revised: 10.16.14 tel:949-546-8000 | fax:949-546-8001 Visit www.abracon.com for Terms & Conditions of Sale Configurable High Performance SMD TCXO/VCTCXO ASGTX Pb RoHS/RoHS II Compliant LVDS/LVPECL output Dimensions: inches [mm] Pin # 1 2 3 4 5 6 9.0 x 7.0 x 2.24 mm Pin Description TCXO VCTCXO (1) N/C By-Pass (2) Vc (3) GND RF Output Complimentary RF Output Vdd N/C (1) = Please leave this pin electrically floating on the end-PCB By-Pass (2) = In TCXO configuration, it is recommended that a 1,000pF COG by-pass capacitor is connected between Pin#2 and GND Vc (3) = Please connect external voltage to pull the oscillator frequency Recommended Land Pattern Dimensions: inches [mm] ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED 2 Faraday, Suit#B, Irvine, California 92618 Revised: 10.16.14 tel:949-546-8000 | fax:949-546-8001 Visit www.abracon.com for Terms & Conditions of Sale Configurable High Performance SMD TCXO/VCTCXO ASGTX Pb RoHS/RoHS II Compliant 9.0 x 7.0 x 2.24 mm REFLOW PROFILE: TAPE & REEL: Packaging: 1000pcs/reel A0 7.10±0.1 B0 9.60±0.1 W1 16.8+0.6/-0.4 K0 3.00±0.1 W2 22.2 max. Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED 2 Faraday, Suit#B, Irvine, California 92618 Revised: 10.16.14 tel:949-546-8000 | fax:949-546-8001 Visit www.abracon.com for Terms & Conditions of Sale