aocjy7tq - Abracon

Ultra-Low Phase Noise OCXO
AOCJY7TQ
Pb RoHS/RoHS II Compliant
ESD Sensitive
25.5 x 25.5 x 12.7mm
APPLICATIONS:
• COTS Military & Industrial Radios & Timing Circuits
• Cellular Infrastructure
• Radar Systems
• Test & Measurement Equipment
• GPS Tracking with precision hold-over accuracy
• WiMax / WLAN
• Precision primary frequency reference clocks
FEATURES:
• Exceptional Close to the carrier Maximum Phase Noise of -155dBc/Hz @ 1kHz
& -170dBc/Hz @ 10kHz offset from 100.0 MHz Carrier
• SC-Cut, High “Q” resonator based design
• 100.0MHz carrier frequency
• Excellent Frequency Stability of ±50.0 ppb over the operating temperature range of
-40ºC to +70ºC
• Tuned Sinewave output into a 50Ω load
• Industry Standard, 25.5 x 25.5 x 12.7mm RoHS compliant & Pb free package
STANDARD SPECIFICATIONS:
Maximum Rating
Parameters
Rating
Storage Temperature Range
-55 to +125°C
Supply Voltage
-0.3 to 15V
Control Voltage
0 to 5V
ESD, HBM/CDM/MM
2kV/1kV/200V
KeyParameters
Electrical Specifications Minimum
Frequency (Fc)
Initial Frequency Tolerance
(@+25°C) at shipping
Typical
100.000
Warm-up Time (@+25°C)
Frequency Stability Options (Ref. to Frequency @+25°C)
-40°C to +70°C
-40°C to +70°C
-40°C to +85°C
Frequency Stability vs. Supply Voltage
Change (Vdd±5%)
Frequency Stability vs. Load Change
(Load±5%)
Aging per Day
(after 30 days of operation)
Aging per Year
(after 30 days of operation)
Supply Voltage (Vdd)
+11.4
During
Warming-up
Power
Consumption Steady@+25°C & still air
+12.0
Control Port ( Applicable for Voltage Controlled version only)
Control Voltage Range (Vc)
+0
+2.5
Center Control Voltage (Vc)
Frequency Tuning Range
Tuning Slope
Linear i ty
Port Impedance
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
Maximum
Units
MHz
±300
ppb
5
minutes
±50
±100
±200
ppb
ppb
ppb
±10
ppb
±10
ppb
±5
ppb
±500
ppb
+12.6
4.5
1.5
V
W
W
+5
V
+2.5
V
±1000
Positive
ppb
±10
50
LLC
Notes
with accuracy of
±100 ppb
Option “5”
Option “1”
Option “2”
To be with-in ±300
ppb of Fc @ 25°C
%
kΩ
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Ultra-Low Phase Noise OCXO
AOCJY7TQ
Pb RoHS/RoHS II Compliant
ESD Sensitive
25.5 x 25.5 x 12.7mm
STANDARD SPECIFICATIONS:
(Continued)
Parameters
Minimum
Phase Noise*
(100MHz carrier frequency @25°C):
RMS Jitter (12kHz to 20MHz)
Typical
Maximum
Unites
<-95
-93
Offset @10Hz
<-126
-125
Offset @100Hz
<-161
-155
Offset @1kHz
-171
-170
-173
-170
-174
-170
Offset @1MHz
-173
-170
Offset @10MHz
-174
-170
Offset @20MHz
20
40
dBc/Hz
Notes
Offset @10kHz
Offset @100kHz
fs
Sine Wave Output
Output Level
8
dB m
Harmonics
-30
d Bc
Spurious
-70
d Bc
Load
50
Ω
* Close to carrier phase noise is a few dB better in fixed clock configuration than the voltage controlled configuration
PART IDENTIFICATION:
AOCJY7TQ -
- 100.000MHz -
Fixed Clock or Voltage
Controlled
X = Fixed Clock
Freq. Stability over
Operating Temp.
5: ±50ppb
1: ±100ppb
2: ±200ppb
V = Voltage Controlled
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Ultra-Low Phase Noise OCXO
AOCJY7TQ
Pb RoHS/RoHS II Compliant
ESD Sensitive
25.5 x 25.5 x 12.7mm
TYPICAL FREQUENCY STABILITY VS. TEMPERATURE
TYPICAL SHORT TERM STABILITY
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Ultra-Low Phase Noise OCXO
AOCJY7TQ
Pb RoHS/RoHS II Compliant
ESD Sensitive
25.5 x 25.5 x 12.7mm
TYPICAL FREQUENCY PULL VS. CONTROL VOLTAGE
TYPICAL PHASE NOISE
100.00 MHz Carrier
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Ultra-Low Phase Noise OCXO
AOCJY7TQ
Pb RoHS/RoHS II Compliant
ESD Sensitive
25.5 x 25.5 x 12.7mm
OUTLINE DIMENSION:
Reference Connection of Voltage Control Circuit
Pin
1
2
3
4
5
Function
RF Output
GND, Case
Vc
(see Note 2 below)
Vref
(See Note 3 below)
Vdd
Notes:
1. The pins with “*” are for factory testing purpose.
2. Please leave pin 3 not connected if Vc is not used.
3. Please leave pin 4 not connected if Vref is not used.
Dimensions: mm
TAPE & REEL:
20pcs/ ESD Foam Tray
Dimensions: mm
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.21.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale