CERAMIC SMD MICRO MINIATURE MICROPROCESSOR CRYSTAL ABM7 Pb in Glass (exempt per RoHS 2002/95/EC Annex (5)) RoHS/RoHS II Compliant 6.0 x 3.5 x 1.4mm | | | | | | | | | | | | | Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable APPLICATIONS: FEATURES: • Computers, Modems, Communication equipment • Thin equipment • Industrial wide temperature applications • Low in height (1.4 mm max.) • Ceramic package assures high reliability • Small size SMD, suitable for high density applications • Superior heat-resistant glass sealing • Wide operating temperature available STANDARD SPECIFICATIONS: Parameters Minimum Frequency Range(*) Typical Maximum Units 8.000 39.999999 40.000 80.000 40.000 50.000 -10 -40 -50 +60 +90 +50 ºC ºC ppm -50 +50 ppm Operating Temperature Storage Temperature Frequency Tolerance @+25°C Frequency Stability over the Operating Temperature ( ref. to +25°C) Equivalent series resistance Shunt capacitance (C0) Load capacitance (CL) Drive Level Aging@25°C±3°C Insulation Resistance See table 1 below 7 18 10 100 ±5 500 MHz Ω pF pF µW ppm MΩ Notes Fundamental ATcut (Standard) 3rd OT AT-cut (Standard) Fundamental ATcut (See options) See options See options See options See options First year @ 100Vdc (*) Frequency above 40MHz based on availability. Please contact ABRACON Table 1 Frequency (MHz) 8.000 – 9.999 10.000 – 11.999 12.000 – 15.999 16.000 – 50.000 40.000 – 80.000 ABRACON IS ISO9001:2008 CERTIFIED CE RTIFIED ESR(Ω) max. 100 80 60 50 70 Operation Mode Fundamental Fundamental Fundamental Fundamental 3rd Overtone LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.06.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale | | CERAMIC SMD MICRO MINIATURE MICROPROCESSOR CRYSTAL ABM7 Pb in Glass (exempt per RoHS 2002/95/EC Annex (5)) RoHS/RoHS II Compliant 6.0 x 3.5 x 1.4mm | | | | | | | | | | | | | OPTIONS AND PART IDENTIFICATION: (left blank if standard) ABM7- MHz - - - - - - Packaging Frequency in MHz e.g. 14.31818MHz 14.31818MHz 26.000MHz Blank: Bulk T: 1kpcs/reel T2: 250pcs/reel Load Capacitance (pF) Please specify CL in pF or S for series (8 to 33pF) Mode F: Fund AT for >40MHz Please contact ABRACON for other values Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) Operating Temp. Freq. Tolerance E: 0°C ~ +70°C 1: ± 10 ppm B: -20°C ~ +70°C 7: ± 15 ppm C: -30°C ~ +70°C 2: ± 20 ppm N: -30°C ~ +85°C 3: ± 25 ppm D: -40°C ~ +85°C 4: ± 30 ppm J(***): -40°C ~ +105°C K(***): -40°C ~ +125°C L(***):-55°C to +125°C (***) ±100 ppm only Please check with Abracon for availability for non-standard frequencies with these operating temperature options. Freq. Stability U: ± 10 ppm(*) G: ± 15 ppm(**) X: ± 20 ppm W: ± 25 ppm Y: ± 30 ppm H: ± 35 ppm Q: ± 100 ppm (*) -10°C to 60°C only. (**) Contact ABRACON for availability for -40°C to +85°C OUTLINE DIMENSION: Dimensions: inches (mm) Note: Due to the availability of raw materials, this part may be manufactured with the chamfer on pin 1. Be advised that this does not affect the electrical characteristics of the crystal in any way. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.06.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale | | RE CERAMIC SMD MICRO MINIATURE MICROPROCESSOR CRYSTAL ABM7 Pb in Glass (exempt per RoHS 2002/95/EC Annex (5)) RoHS/RoHS II Compliant 6.0 x 3.5 x 1.4mm | | | | | | | | | | | | | REFLOW PROFILE: TAPE & REEL: Packaging: T: 1000pcs/reel Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.06.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale | |