SMD MICROPROCESSOR CRYSTAL ABLS6M Pb RoHS / RoHS II Compliant 6.0 x 3.0 x 1.9mm Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: • Reduced footprint from ABLS (standard HC/49US package) by 66% • Low profile: 1.9mm typ. height • Suitable for RoHS compliant reflow • Tight stability & extended temperature options • High reliability & Cost effective • Resistance welded metal package APPLICATIONS: • Wireless Applications • Home electronics • Computers, modems, and communications • Microprocessors STANDARD SPECIFICATIONS: Parameters Frequency Range* Standard Frequencies Operation Mode Operating Temperature Storage Temperature Frequency Tolerance @+25°C Frequency Stability over the Operating Temperature ( ref. to +25°C) Equivalent series resistance (R1) Shunt capacitance (C0) Minimum Typical MHz Notes MHz Fundamental (AT-cut) 0 -40 -50 +70 +125 +50 ºC ºC ppm See options -50 +50 ppm See options 60 5 Ω pF @+25°C pF Standard (See options if Drive Level 50 -5 Drive level dependency (DLD) 30.0 12.0, 16.0 18 Insulation Resistance Units 12.0 Load capacitance (CL) Aging Maximum 100 µW +5 ppm See options other than STD) @25°C±3°C First year @ 100Vdc ± 15V 500 MΩ 10nw ~ 100uw,12 points Change in ESR (Maximum - Minimum) over DLD range < 30% ESR max. * Please contact Abracon for other frequencies. ABRACON IS ISO9001:2008 CE RTIFIED 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 01.29.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale SMD MICROPROCESSOR CRYSTAL ABLS6M Pb RoHS / RoHS II Compliant 6.0 x 3.0 x 1.9mm PART IDENTIFICATIONS: (Left blank if standard) ABLS6M - MHz - - - Packaging Blank: Bulk T: Tape & Reel Frequency in MHz Please specify the frequency in MHz. e.g. 12.000MHz 14.31818MHz Load Capacitance (pF) Please specify CL (Minimum 8pF) in pF or S for series Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) Freq. Stability (See Table 1 for details) Blank: ± 50 ppm U: ± 10 ppm G: ± 15 ppm X: ± 20 ppm W: ± 25 ppm Y: ± 30 ppm H: ± 35 ppm Q: ± 100 ppm Freq. Tolerance Blank: ± 50 ppm 1: ± 10 ppm 7: ± 15 ppm 2: ± 20 ppm 3: ± 25 ppm 4: ± 30 ppm Operating Temp. Blank: 0°C ~ +70°C A: -10°C ~ +60°C B: -20°C ~ +70°C C: -30°C ~ +70°C N: -30°C ~ +85°C D: -40°C ~ +85°C J: -40°C ~ +105°C K: -40°C ~ +125°C Table 1 Available Combinations of Operating Temp. and Freq. Stability Operating Temp. Freq. Stability U:±10ppm G:±15ppm X:±20ppm W:±25ppm Y:±30ppm A: -10°C ~ +60°C √ Std.: 0°C ~ +70°C √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ N: -30°C ~ +85°C √ √ √ √ D: -40°C ~ +85°C √ √ √ √ √ √ B: -20°C ~ +70°C C: -30°C ~ +70°C J: -40°C ~ +105°C H:±35ppm Std.:±50ppm Q:±100ppm K: -40°C ~ +125°C √ Note: Please contact Abracon for other frequency stability and operating temperature range options. ABRACON IS ISO9001:2008 CE RTIFIED 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 01.29.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale SMD MICROPROCESSOR CRYSTAL ABLS6M Pb RoHS / RoHS II Compliant 6.0 x 3.0 x 1.9mm OUTLINE DIMENSION: 0.008 ±0.004 0.20 ±0.10 0.236 ±0.008 6.00 ±0.20 0.209 TYPE. 5.30 0.075 TYP. 1.90 0.012 ±0.008 0.30 ±0.20 0.039 MAX. 1.00 Recommended Land Pattern 0.047 1.20 0.091 ±0.008 2.30 ±0.20 0.118 ±0.008 3.00 ±0.20 0.055 TYP. 1.40 0.260 ±0.020 6.60 ±0.50 0.118 3.00 TYPE 0.079 2.00 MIN 0.118 3.00 TYPE 0.012 ±0.008 0.30 ±0.20 Actual Size Comparison 0.083 ±0.008 2.10 ±0.20 0.083 ±0.008 2.10 ±0.20 ABLS6M 0.094 ±0.004 2.40 ±0.1 11.4 x 4.7 x 4.2 mm 0.024 ±0.001 0.60 ±0.02 0.118 MAX. 3.00 ABLS 6.0 x 3.0 x 1.9 mm Dimension: inches [mm] REFLOW PROFILE: ABRACON IS ISO9001:2008 CE RTIFIED 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 01.29.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale SMD MICROPROCESSOR CRYSTAL ABLS6M Pb RoHS / RoHS II Compliant 6.0 x 3.0 x 1.9mm TAPE & REEL: T = tape and reel (3000pcs/reel) No. A C D T F G H No. J K L M N P Q R S Dimensions (mm) 100 ± 1.0 330 ± 2.0 16.4 ± 1.0 20.4 ± 0.5 13.0 ± 0.2 20.2 min. 1.5 min. Dimensions (mm) Ø1.5 4.0 ± 0.1 16.0 ± 0.3 7.5 ± 0.1 8.8 ± 0.1 2.2 ± 0.1 0.3 ± 0.05 8.0 ± 0.1 3.4 ± 0.1 Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 01.29.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale