CERAMIC SMD ULTRA MINIATURE QUARTZ CRYSTAL ABM10 Moisture Sensitivity Level (MSL) – This product is Hermetically Pb RoHS/RoHS II Compliant Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: 2.5 x 2.0 x 0.5 mm | | | | | | | | | | | | | | | APPLICATIONS: • 2.5 x 2.0 x 0.5mm ultra miniature package • Suitable for RoHS reflow profile • Tight stability available ±10ppm over -10 to +60ºC • Seam sealed ceramic package assures high precision and reliability • Blue-tooth, Wireless applications • High density applications • Computers, Modems, Microprocessors • PCMCIA • Portable radios and MP3 players • Communication, Test equipment STANDARD SPECIFICATIONS: Parameters Minimum Frequency Range Typical Maximum Units Notes 55.000 MH z Fundamental See options 12.000 Operation Mode Fundamental Operating Temperature -10 +60 ºC S t o r a g e Te m p e r a t u r e -40 +125 ºC ±20 ppm See options ±30 ppm See options 7 pF Frequency Tolerance @+25°C Frequency Stability over the Operating Temperature ( ref. to +25°C) Equivalent series resistance (R1) See table 1 below Shunt capacitance (C0) Load capacita nce (CL) 10 Drive Level Aging@25°C±3°C 10 Insulation Resistance Ω pF Standard (See options if other than STD) 100 µW ±5 ppm First year MΩ @ 100Vdc ± 15V 500 Table 1 – standard ESR Frequency (MHz) ESR(Ω) max. 12.000 – 15.999 250 16.000 – 19.999 150 20.000 – 29.999 100 30.000 – 55.000 70 OPTIONS & PART IDENTIFICATION: (Left blank if standard) ABM10 - MHz - - - - Packaging Blank: Bulk T: 1000pcs/reel T3: 3000pcs/reel Frequency in MHz Please specify the frequency in MHz. e.g. 16.000MHz Load Capacitance (pF) Please specify CL in pF or S for series (8pF min.) Freq. Tolerance 1: ± 10 ppm 7: ± 15 ppm 3: ± 25 ppm 4: ± 30 ppm Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) ± 10 ppm ± 15 ppm ± 20 ppm ± 30 ppm Operating Temp. I10 I15 I20 I30 0°C ~ +50°C A10 A15 A20 STD* -10°C ~ +60°C E10 E15 E20 E30 -20°C ~ +70°C C10 C15 C20 C30 -30°C ~ +70°C N10 N15 N20 N30 -30°C ~ +85°C X X D20 D30 -40°C ~ +85°C X X X X -40°C ~ +105°C X X X X -40°C ~ +125°C * Please leave blank, as this is the standard/default spec. Contact Abracon for tighter frequency stability ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED LLC ± 50 ppm I50 A50 E50 C50 N50 D50 J50 K50 ± 100 ppm I100 A100 E100 C100 N100 D100 J100 K100 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.21.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale CERAMIC SMD ULTRA MINIATURE QUARTZ CRYSTAL ABM10 Pb RoHS/RoHS II Compliant 2.5 x 2.0 x 0.5 mm | | | | | | | | | | | | | | | OUTLINE DRAWING: Note: From the top view (marking side), pin #1 is always located at the bottom left corner of the package. This is regardless of the location of the Chamfer, since due to material availability, the Chamfer could be located on pin#1, 2 or 4. Be advised that the Chamfer location has no impact on the electrical performance of the device. Dimensions: inches (mm) TAPE & REEL: REFLOW PROFILE: T: 1000pcs/reel T3: 3000pcs/reel Dimensions: mm Need a test socket for the ABM10 Series? To view compatible PRECISION TEST & BURN-IN SOCKETS for these parts, click here. P/N: AXS-2520-04-10 ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.21.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale