HIGH FREQUENCY CYLINDRICAL TYPE MICROPROCESSOR CRYSTAL L AB308 Pb RoHS/RoHS II Compliant FEATURES: 8.0 x Ø3.0mm APPLICATIONS: • Suitable for wide range of application • Clocks for microprocessor • Consumer electronics • Test equipment • Computer peripherals • High stability by tight vacuum sealing • Miniature high frequency cylinder type crystal STANDARD SPECIFICATIONS: Parameters Frequency Range Operation Mode Operating Temperature Storage Temperature Frequency Tolerance @+25°C Frequency Stability over the Operating Temperature ( ref. to +25°C) Minimum Typical 4.000 Maximum 40.000 40.001 70.000 rd Fundamental or 3 Overtone -10 +60 -40 +85 -30 +30 -50 +50 Units MHz ºC ºC ppm 80 60 50 Ω 40 30 80 Shunt capacitance (C0) Load capacita nce (CL) Dr iv e Level Aging@25°C±3°C Insulation Resistance ABRACON IS ISO9001:2008 CE RTIFIED 5 16 -5 500 1 00 +5 Fundamental 3rd Overtone See options See options ppm 150 Equivalent series resistance (R1) Notes pF pF µW ppm MΩ 4.000 – 5.999MHz Fundamental 6.000 – 9.999MHz Fundamental 10.000 – 10.999MHz Fundamental 11.000 – 19.999 MHz Fundamental 20.000 –29.999 MHz Fundamental 30.000 –40.000 MHz Fundamental 40.001 – 70.000 MHz 3rd OT See options First year @ 100Vdc ± 15V Revised: 08.07.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com HIGH FREQUENCY CYLINDRICAL TYPE MICROPROCESSOR CRYSTAL L AB308 Pb RoHS/RoHS II Compliant 8.0 x Ø3.0mm OPTIONS AND PART IDENTIFICATION: (Left blank if standard) AB308 - MHz - - - Frequency in MHz Please specify the frequency in MHz. e.g. 14.31818MHz Freq. Tolerance Blank: ± 30 ppm 5: ± 50 ppm Load Capacitance (pF) Please specify CL in pF or S for series (10pF min.) Operating Temp. Blank: -10°C ~ +60°C E: 0°C ~ +70°C Please contact Abracon for values under 10pF Custom ESR if other than STD R□ □: Specify a value in Ω (e.g.: R40) OUTLINE DRAWING: Dimensions: mm Packaging = Bulk, 1000pcs/bag ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 08.07.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com