32.768 kHz LOW FREQUENCY SMD CRYSTAL ABS25 Pb in High Tempe rature Solder (exempt per RoHS 2002/95/EC Annex (7)) RoHS 8.0 x 3.8 x 2.5 mm Compliant | | | | | | | | | | | | | | FEATURES: APPLICATIONS: • Plastic molded SMD • 2.5mm height ideal for high density circuit boards • Suitable for RoHS compliant reflow • Extended temperature -40°C to +85°C for industrial applications • Wide range in communication & measuring equipment • Commercial & Industrial applications • Computer clock STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Nominal Frequency ----- 32.768 ----- kHz Frequency Range Operating Temperature Turnover Temperature Storage Temperature 30 -40 +20 -55 -20 --------+25 --------- 100 +85 +30 +125 +20 kHz ºC ºC ºC -30 ----- +30 ---------0.040 --------- 450 425 to 800 -0.034 ----1.35 0.8 to 1.7 12.5 ----------------- ---------0.028 50 ----- Frequency Tolerance @+25°C Capacitance Ratio (C0/C1) Frequency Coefficient (ß) Equivalent series resistance (R1) Shunt capacitance (C0) Load capacitance (CL) Drive Level -----3 -5 500 Aging Insulation Resistance 1 +3 +5 ----- ppm ppm/T2 kΩ pF pF pF µW Notes 32.768kHz Other frequencies See options 32.768kHz Other frequencies 32.768kHz Other frequencies See options ppm @25°C±3°C First year MΩ @ 100Vdc ± 15V OPTIONS AND PART IDENTIFICATION: (Left blank if standard) ABS25 - Frequency in kHz Please specify the frequency in kHz. e.g. 32.768kHz - Load Capacitance (pF) Blank: 12.5pF Please specify load cap. in pF (ex. 6pF) if not standard - - Freq. Tolerance 1: ± 10 ppm 5: ± 15 ppm 2*: ± 20 ppm 3: ± 25 ppm 4**: ± 30 ppm Packaging Blank: Bulk T: Tape and Reel * STD for 32.768kHz. Please leave this blank if F is 32.768kHz. ** STD for other frequencies. Please leave this blank if F is not 32.768kHz. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 06.06.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | 32.768 kHz LOW FREQUENCY SMD CRYSTAL ABS25 Pb in High Tempe rature Solder (exempt per RoHS 2002/95/EC Annex (7)) RoHS Compliant 8.0 x 3.8 x 2.5 mm | | | | | | | | | | | | | | OUTLINE DRAWING: Electrade Arrangement Pin 2 and 3 are not connected to the GND (Floating) Dimensions: (inches) mm REFLOW PROFILE TAPE & REEL: T = Tape and reel 3,000pcs/reel Dimensions: mm ATTENTION:Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Revised: 06.06.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com |