10.7MHz CERAMIC FILTER AFC10.7M Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)). FEATURES: • Small size, Light weight • Low loss/High attenuation option available • Low cost thru hole pacakge RoHS Compliant 7.0 x 4.0 x 7.0 mm | | | | | | | | | | | | | | | APPLICATIONS: • FM receivers • Digital transmission systems • Communications applications STANDARD SPECIFICATIONS: MAXIMUM RATINGS Item Withstanding Voltage(V) Insulation Resistance Ri (MΩ) min. Operating temperature Storage temperature Requirement 50(DC, 1min) 100(10V, 1min) -40°C ~ +85°C -40°C ~ +85°C ELECTRICAL CHARACTERISTICS 3dB 20 dB Insertion Spurious Input/Output Special Bandwidth Bandwidth Loss Attenuation Impedance design (kHz) (kHz) max. (dB)max 9-12MHz dB min (Ω) AFC10.7MA 280 ± 50 650 6 30 330 AFC10.7MS 230 ± 50 600 6 40 330 AFC10.7MC 180 ± 40 520 7 40 330 AFC10.7MJ 150 ± 40 400 10 38 330 AFC10.7MA25 280 ± 50 590 2.5±2.0 30 330 AFC10.7MS30 230 ± 50 520 3.0±2.0 35 330 AFC10.7MC35 180 ± 40 470 3.5±1.5 35 330 AFC10.7MJ45 150 ± 40 360 4.5±2.0 35 330 AFC10.7MW330 330 ± 50 680 4.0±2.0 30 330 Wide/ Narrow AFC10.7MW110 110 ± 30 350 7.0±2.0 30 330 Bandwidth Part Number STD Low-Loss TEST CIRCUIT Test conditions: Parts shall be tested under the condition (Temp.: 20 ± 15°C, Humidity: 65±20% R.H.) unless the standard condition (Temp.: 25±2°C, Humidity: 65±5% R.H.) is regulated to measure Rg+R1=R2= Input/Output Impedance (Ω) C=10pF (Including stray capacitance and capacitance of RF voltagemeter) ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.20.09 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 10.7MHz CERAMIC FILTER AFC10.7M RoHS Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)). Compliant 7.0 x 4.0 x 7.0 mm | | | | | | | | | | | | | | | OPTIONS AND PART IDENTIFICATION (Left blank if standard) AFC10.7M Packaging Blank Bulk AMMO A packing Part Number See table in Section 2.2 OUTLINE DIMENTSIONS: * * Leand length: 5mm is for bulk parts; 13.5mm is for ammo packaging NOTE: Abracon manufactured products are intended for general commercial and industrial use. For applications requiring high reliability and/or presenting extreme operating environment, written consent & authorization from Abracon is required. ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.20.09 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com