HD74HC4066 Quad Analog Switches/Quad Multiplexers REJ03D0651-0200 (Previous ADE-205-538) Rev.2.00 Mar 30, 2006 Description This switch has low “on” resistance and low “off” leakage. It is a bidirectional switch, thus any analog input may be used as an output and vice-versa. Also the HD74HC4066 switch contains linearization circuitry which lowers the “on” resistance and increases switch linearity. The HD74HC4066 device allows control of up to 12 V (peak) analog signals with digital control signals of the same range. Each switch has its own control input which disables each switch when low. Features • High Speed Operation • Wide Operating Voltage: VCC = 2 to 6 V • Low Quiescent Supply Current: ICC (static) = 1 µA max (Ta = 25°C) • Ordering Information Part Name Package Type HD74HC4066P DILP-14 pin HD74HC4066FPEL SOP-14 pin (JEITA) HD74HC4066RPEL SOP-14 pin (JEDEC) HD74HC4066TELL TSSOP-14 pin Package Code (Previous Code) PRDP0014AB-B (DP-14AV) PRSP0014DF-B (FP-14DAV) PRSP0014DE-A (FP-14DNV) PTSP0014JA-B (TTP-14DV) Package Abbreviation Taping Abbreviation (Quantity) P — FP EL (2,000 pcs/reel) RP EL (2,500 pcs/reel) T ELL (2,000 pcs/reel) Note: Please consult the sales office for the above package availability. Function Table Control Switch L H OFF ON GND ≤ Vin ≤ VCC GND ≤ Vout ≤ VCC Rev.2.00 Mar 30, 2006 page 1 of 9 HD74HC4066 Pin Arrangement In 1 1 Out 1 2 Out 2 3 14 VCC In C 13 Control 1 Out 12 Control 4 In In 2 4 Control 2 5 Control 3 6 GND 7 Out C 11 In 4 C Out In C In 10 Out 4 9 Out 3 8 In 3 Out (Top view) Logic Diagram In/Out Out/In Control Absolute Maximum Ratings Item Symbol Rating Unit VCC VC –0.5 to +7.0 – 0.5 to VCC + 0.5 V V VIN/OUT ICC – 0.5 to VCC + 0.5 +50 V mA Switch I/O current (per pin) IGND IIN/OUT –50 ±25 mA mA Control input diode current Switch I/O diode current IIK IIOK ±20 ±20 mA mA Power dissipation Storage temperature range PT Tstg 500 –65 to +150 mW °C Supply voltage Control input voltage Switch I/O voltage Supply current (VCC) (GND) Rev.2.00 Mar 30, 2006 page 2 of 9 HD74HC4066 Recommended Operating Conditions Item Supply voltage Control input voltage Switch I/O voltage Operating temperature Input rise/fall time VCC = 2.0 V VCC = 4.5 V Symbol Min Typ Max Unit VCC VC 2 0 — — 6 VCC V V VIN/OUT Topr 0 –40 — — VCC +85 V °C tr , tf 0 0 — — 1000 500 ns ns 0 — 400 ns VCC = 6.0 V Electrical Characteristics Ta = 25°C Item Control input voltage Symbol VCC (V) VIH VIL “ON” resistance RON Ta = –40 to+85°C 2.0 Min 1.5 Typ — Max — Min 1.5 Max — 4.5 6.0 3.15 4.2 — — — — 3.15 4.2 — — 2.0 4.5 — — — — 0.5 1.35 — — 0.5 1.35 6.0 2.0 — — — 2000 1.8 5000 — — 1.8 6250 4.5 6.0 — — 100 60 200 170 — — 250 210 2.0 4.5 — — 50 3 — — — — — — — — 2 — — ±0.1 — — Unit Test Conditions V V Ω VC = VIH Vin = 0 to VCC Iin/out = 1 mA Ω — ±1.0 VC = VIH, Iin/out = 1 mA between any two channels µA VC = VIL VIN = VCC, Vout = GND or, Vin = GND, Vout = VCC µA VC = VIH Vin = VCC or GND ∆ON resistance between any two channels ∆RON OFF channel leakage current (switch off) IS (OFF) 6.0 6.0 OFF channel leakage current (switch on) Control input current IS (ON) 6.0 — — ±0.1 — ±1.0 Iin 6.0 — — ±0.1 — ±1.0 µA Vin = VCC or GND ICC 6.0 — — 1.0 — 10.0 µA Vin = VCC or GND Quiescent supply current Rev.2.00 Mar 30, 2006 page 3 of 9 HD74HC4066 Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns, VEE = GND) Ta = 25°C Item Symbol VCC (V) Ta = –40 to +85°C Unit 2.0 Min — Typ 25 Max 60 Min — Max 75 4.5 6.0 — — 6 5 12 10 — — 15 13 2.0 4.5 — — 25 6 60 12 — — 75 15 6.0 2.0 — — 5 — 10 50 — — 13 65 4.5 6.0 — — 4 — 10 9 — — 13 11 2.0 4.5 — — — 10 115 23 — — 145 29 6.0 2.0 — — — — 20 115 — — 25 145 4.5 6.0 — — 14 — 23 20 — — 29 25 Sine wave distortion 4.5 — 0.05 — — — Band width (–3 dB) 4.5 — 30 — — — Feed through attenuation Cross talk between control input to signal I/O 4.5 — –50 — — — dB 2.0 — 25 — — — mA 4.5 6.0 — — 60 75 — — — — — — 4.5 — –50 — — — 2.0 — 20 — — — 4.5 6.0 — — 30 30 — — — — — — Cin — 5 10 — 10 pF Cin/out — 6 — — — pF Cin/out — 0.5 — — — pF CPD — 13 — — — pF Propagation delay time tPLH tPHL Propagation delay time tPLH tPHT Output enable time tZH Output disable time tLZ tHZ Cross talk between any two switches Maximum control frequency Control input capacitance Switch I/O capacitance Feed through capacitance Power dissipation capacitance Rev.2.00 Mar 30, 2006 page 4 of 9 ns Test Conditions RL = 10 kΩ Switch input to switch output ns ns RL = 10 kΩ ns RL = 1 kΩ ns RL = 1 kΩ % RL = 10 kΩ, CL = 50 pF, fIN = 1 kHz MHz RL = 600 Ω, CL = 50 pF, 20 log10Vout/Vin = –3dB RL = 600 Ω, CL = 50 pF, fIN = 1 MHz RL = 600 Ω, CL = 50 pF, fIN = 1 MHz RL = 600 Ω, CL = 50 pF, fIN = 1 MHz MHz RL = 1 kΩ, CL = 15 pF, Vout = 1/2 (VCC) dB HD74HC4066 Test Circuit Maximum Control Frequency VCC VCC VC VC 0V VCC Vout Vin = VCC GND RL = 1 kΩ CL = 15 pF Vout Vcc/2 Cross talk (Control Input to Switch Output) VC tf tr VCC VCC VCC Vin Rin = 600 Ω RL = 600 Ω GND VCC/2 90% VC Vout 10% GND CL = 50 pF 10% (f = 1 MHz) VCC/2 tr = tr = 6 ns Feed through Attenuation VCC VC = GND Vin (Sine Wave) 0.1 µF Vin fin Rin = 600 Ω VCC (OFF) Vout RL = 600 Ω GND VCC/2 (Vin = 0 dBm, f = 1 MHz) CL = 50 pF VCC/2 Sine Wave Distortion VC = VCC VCC Vin (Sine Wave) fin Vin 10 µF VCC (ON) GND Vout RL = 10 kΩ VCC/2 Rev.2.00 Mar 30, 2006 page 5 of 9 CL = 50 pF (Vin = 4 Vp-p, f = 1 kHz) HD74HC4066 Cin, Cout, Cin–out (Input, Output, and Feed through Capacitance) Cin-out 5V VC = GND VCC Signal Input Pin Commom Pin (OFF) GND Cin Cout Switch Frequency Response Band Width (-3dB) VCC VC = VCC Vin (Sine Wave) 0.1 µF fin Vin Rin = 600 Ω VCC (ON) Vout VCC/2 (Vin = 0 dBm, f = 1 MHz) RL = 600 Ω GND CL = 50 pF VCC/2 RON: ON Resistance VC = VIH Vin VCC VCC I/O O/I (ON) Vout GND V Vin-out IS (OFF): OFF Channel Leakage Current (Switch OFF) VC = VIL Vin = VCC or GND I/O A VCC VCC (OFF) GND Rev.2.00 Mar 30, 2006 page 6 of 9 Vout = VSS or VCC HD74HC4066 IS (ON): OFF Channel Leakage Current (Switch ON) VC = VIH I/O A Vin = VCC or GND VCC VCC Vout (ON) OPEN GND tPLH, tPHL: Propagation Delay Time (Switch Input to Switch Output) VC = VIH tr tf VCC VCC VCC (ON) Vin 90% Vin Vout GND RL = 10 kΩ 50% CL = 50 pF 50% tPLH 10% GND 10% tPHL VOH 50% Vout 50% VOL tZH, tZL/tHZ, tLZ: Output Enable and Disable Time tf VCC VCC VC = Vin VINH Vin 90% 90% 50% 50% 10% GND VCC Vout GND VCC tr RL = 1 kΩ tZH GND 90% 50% VOL VCC VOH tZL tLZ 50% Vout VOL Rev.2.00 Mar 30, 2006 page 7 of 9 tHZ VOH CL = 50 pF Vout GND 10% 10% HD74HC4066 Package Dimensions JEITA Package Code P-DIP14-6.3x19.2-2.54 RENESAS Code PRDP0014AB-B Previous Code DP-14AV MASS[Typ.] 0.97g D 8 E 14 7 1 b3 A Z A1 Reference Symbol L e1 D E A A1 bp b3 c θ e Z L θ bp e c e1 ( Ni/Pd/Au plating ) JEITA Package Code P-SOP14-5.5x10.06-1.27 RENESAS Code PRSP0014DF-B *1 Previous Code FP-14DAV Dimension in Millimeters Min Nom Max 7.62 19.2 20.32 6.3 7.4 5.06 0.51 0.40 0.48 0.56 1.30 0.19 0.25 0.31 0° 15° 2.29 2.54 2.79 2.39 2.54 MASS[Typ.] 0.23g D F 14 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. 8 c HE *2 E bp Index mark Terminal cross section ( Ni/Pd/Au plating ) 1 Z 7 e *3 bp x Reference Symbol M A L1 A1 θ y L Detail F Rev.2.00 Mar 30, 2006 page 8 of 9 D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Dimension in Millimeters Min Nom Max 10.06 10.5 5.50 0.00 0.10 0.20 2.20 0.34 0.40 0.46 0.15 0.20 0.25 0° 8° 7.50 7.80 8.00 1.27 0.12 0.15 1.42 0.50 0.70 0.90 1.15 HD74HC4066 JEITA Package Code P-SOP14-3.95x8.65-1.27 RENESAS Code PRSP0014DE-A *1 Previous Code FP-14DNV MASS[Typ.] 0.13g NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. F D 14 8 c *2 Index mark HE E bp Terminal cross section ( Ni/Pd/Au plating ) Reference Symbol 1 7 *3 e Z bp x M A L1 A1 θ L y Detail F JEITA Package Code P-TSSOP14-4.4x5-0.65 RENESAS Code PTSP0014JA-B *1 Previous Code TTP-14DV D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Dimension in Millimeters Min Nom Max 8.65 9.05 3.95 0.10 0.14 0.25 1.75 0.34 0.40 0.46 0.15 0.20 0.25 0° 8° 5.80 6.10 6.20 1.27 0.25 0.15 0.635 0.40 0.60 1.27 1.08 MASS[Typ.] 0.05g D F 14 8 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. HE c *2 E bp Index mark Terminal cross section ( Ni/Pd/Au plating ) 1 Reference Symbol 7 *3 Z bp x M L1 A e A1 θ L y Detail F Rev.2.00 Mar 30, 2006 page 9 of 9 D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Dimension in Millimeters Min Nom Max 5.00 5.30 4.40 0.03 0.07 0.10 1.10 0.15 0.20 0.25 0.10 0.15 0.20 0° 8° 6.20 6.40 6.60 0.65 0.13 0.10 0.83 0.4 0.5 0.6 1.0 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2006. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .6.0