HD74HC131 3-to-8-line Decoder/Demultiplexer with Edge-Triggered Address Registers REJ03D0566-0200 (Previous ADE-205-440) Rev.2.00 Oct 11, 2005 Description The HD74HC131 is 3-to-8 linedecoder. It has Address select inputs (A, B, C) and D type register. Address select data store to D type registers, during the positive going transition of the clock pulse. Output control (G1, G2) are independent of select input and CLK input, and when G1 is low or G2 = High, all outputs is high. Features • • • • • • High Speed Operation: tpd (CLK to Y) = 20 ns typ (CL = 50 pF) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 V to 6 V Low Input Current: 1 µA max Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C) Ordering Information Part Name Package Type HD74HC131P DILP-16 pin HD74HC131FPEL SOP-16 pin (JEITA) HD74HC131RPEL SOP-16 pin (JEDEC) Package Code (Previous Code) PRDP0016AE-B (DP-16FV) PRSP0016DH-B (FP-16DAV) PRSP0016DG-A (FP-16DNV) Package Abbreviation P — FP EL (2,000 pcs/reel) RP EL (2,500 pcs/reel) Note: Please consult the sales office for the above package availability. Rev.2.00, Oct 11, 2005 page 1 of 8 Taping Abbreviation (Quantity) HD74HC131 Function Table Inputs CLK X X L H: L: X: Enable G1 X L H H H H H H H H H High level Low level Irrelevant G2 C Select B H X L L L L L L L L L X X L L L L H H H H X X X L L H H L L H H X Outputs A Y0 X X L H L H L H L H X H H L H H H H H H H Y1 Y2 Y3 Pin Arrangement A 1 16 VCC B 2 15 Y0 C 3 14 Y1 CLK 4 13 Y2 G2 5 12 Y3 G1 6 11 Y4 Y7 7 10 Y5 GND 8 9 Y6 (Top view) Rev.2.00, Oct 11, 2005 page 2 of 8 Y4 Y5 Y6 H H H H H H H H H H H H H H H H H H L H H H H H H L H H H H H H L H H H H H H L H H H H H H L H H H H H H L H H H H H H Outputs corresponding to stored address, L; all others H Y7 H H H H H H H H H L HD74HC131 Logic Diagram Y0 A Y1 Y2 B Y3 C Y4 Y5 CLK Y6 G2 Y7 G1 Absolute Maximum Ratings Item Supply voltage range Input voltage Output voltage Output current DC current drain per VCC, GND DC input diode current DC output diode current Power dissipation per package Storage temperature Symbol Rating Unit VCC VIN VOUT IOUT ICC, IGND IIK IOK PT Tstg –0.5 to +7.0 –0.5 to VCC + 0.5 –0.5 to VCC + 0.5 ±25 ±50 ±20 ±20 500 –65 to +150 V V V mA mA mA mA mW °C Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Rev.2.00, Oct 11, 2005 page 3 of 8 HD74HC131 Recommended Operating Conditions Symbol Ratings Unit Supply voltage Input / Output voltage Item VCC VIN, VOUT 2 to 6 0 to VCC V V Operating temperature Ta –40 to 85 0 to 1000 °C 0 to 500 0 to 400 ns Input rise / fall time Note: *1 tr , tf Conditions VCC = 2.0 V VCC = 4.5 V VCC = 6.0 V 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. Electrical Characteristics Ta = 25°C Item Input voltage Symbol VCC (V) VIH VIL Output voltage VOH VOL Ta = –40 to+85°C 2.0 Min 1.5 Typ — Max — Min 1.5 Max — 4.5 6.0 3.15 4.2 — — — — 3.15 4.2 — — 2.0 4.5 — — — — 0.5 1.35 — — 0.5 1.35 6.0 2.0 — 1.9 — 2.0 1.8 — — 1.9 1.8 — 4.5 6.0 4.4 5.9 4.5 6.0 — — 4.4 5.9 — — 4.5 6.0 4.18 5.68 — — — — 4.13 5.63 — — 2.0 4.5 — — 0.0 0.0 0.1 0.1 — — 0.1 0.1 6.0 4.5 — — 0.0 — 0.1 0.26 — — 0.1 0.33 Unit Test Conditions V V V Vin = VIH or VIL IOH = –20 µA IOH = –4 mA IOH = –5.2 mA V Vin = VIH or VIL IOL = 20 µA IOL = 4 mA Input current Iin 6.0 6.0 — — — — 0.26 ±0.1 — — 0.33 ±1.0 IOL = 5.2 mA µA Vin = VCC or GND Quiescent supply current ICC 6.0 — — 4.0 — 40 µA Vin = VCC or GND, Iout = 0 µA Rev.2.00, Oct 11, 2005 page 4 of 8 HD74HC131 Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns) Ta = 25°C Item Propagation delay time Symbol VCC (V) tPLH, tPHL tPLH, tPHL Pulse width tw Setup time tsu Hold time th Output rise/fall time Input capacitance tTLH, tTHL Cin Ta = –40 to +85°C Typ — 20 — — 15 — Max 210 42 36 140 28 24 Min — — — — — — Max 265 53 45 175 35 30 Unit 2.0 4.5 6.0 2.0 4.5 6.0 Min — — — — — — 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 — 80 16 14 50 10 9 5 5 5 — — — — — 5 — — 2 — — –1 — — 5 — 5 — — — — — — — — — 75 15 13 10 100 20 17 65 13 11 5 5 5 — — — — — — — — — — — — — 95 19 16 10 ns ns CLK to Y ns G1 or G2 to Y ns ns ns pF Test Circuit Measurement point CL* Note: CL includes the probe and fig capacitance. Rev.2.00, Oct 11, 2005 page 5 of 8 Test Conditions HD74HC131 Waveforms VCC Select 50% 50% tsu th 0V tf tW CLK 50% tW 50% 10% VCC 90% 50% 10% tr 90% 50% 10% G1 0V tr tf VCC 90% 50% 10% tr 0V tf VCC 90% 50% G2 10% tPLH Y 50% 10% tPHL 50% tPLH 50% 10% tPHL 90% 50% tTLH tPLH 0V tPHL VOH 50% 10% 50% 50% VOL tTHL Notes: 1. Input waveform: PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 6 ns, tf ≤ 6 ns 2. The output are measured one at a time with one transition per measurement. Rev.2.00, Oct 11, 2005 page 6 of 8 HD74HC131 Package Dimensions JEITA Package Code P-DIP16-6.3x19.2-2.54 RENESAS Code PRDP0016AE-B Previous Code DP-16FV MASS[Typ.] 1.05g D 9 E 16 1 8 b3 0.89 Z A1 A Reference Symbol L e Nom c e1 D 19.2 E 6.3 JEITA Package Code P-SOP16-3.95x9.9-1.27 RENESAS Code PRSP0016DG-A *1 Previous Code FP-16DNV 7.4 A1 0.51 b p 0.40 b 3 0.48 0.56 1.30 c 0.19 θ 0° e 2.29 0.25 0.31 2.54 2.79 15° 1.12 L 2.54 MASS[Typ.] 0.15g D NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. F 16 20.32 5.06 Z ( Ni/Pd/Au plating ) Max 7.62 1 A θ bp e Dimension in Millimeters Min 9 c *2 Index mark HE E bp Reference Symbol Terminal cross section ( Ni/Pd/Au plating ) Dimension in Millimeters Min Nom Max D 9.90 10.30 E 3.95 A2 1 Z 8 e *3 bp x A1 0.10 0.14 0.25 0.34 0.40 0.46 0.15 0.20 0.25 6.10 6.20 1.75 A M L1 bp b1 c A c A1 θ L y Detail F 1 θ 0° HE 5.80 1.27 e x 0.25 y 0.15 Z 0.635 0.40 L L Rev.2.00, Oct 11, 2005 page 7 of 8 8° 1 0.60 1.08 1.27 HD74HC131 JEITA Package Code P-SOP16-5.5x10.06-1.27 RENESAS Code PRSP0016DH-B *1 Previous Code FP-16DAV MASS[Typ.] 0.24g NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. D F 16 9 c HE *2 E bp Index mark Reference Symbol Terminal cross section ( Ni/Pd/Au plating ) 1 Z *3 bp Nom D 10.06 E 5.50 Max 10.5 A2 8 e Dimension in Millimeters Min x A1 M 0.00 0.10 0.20 0.34 0.40 0.46 0.15 0.20 0.25 7.80 8.00 2.20 A L1 bp b1 c A c A1 θ y L Detail F 1 θ 0° HE 7.50 1.27 e x 0.12 y 0.15 Z 0.80 0.50 L L Rev.2.00, Oct 11, 2005 page 8 of 8 8° 1 0.70 1.15 0.90 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> 2-796-3115, Fax: <82> 2-796-2145 Renesas Technology Malaysia Sdn. Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2005. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .3.0