HD74HC688 8-bit Magnitude Comparator REJ03D0643–0200 (Previous ADE-205-529) Rev.2.00 Mar 30, 2006 Description The HD74HC688 compares bit for bit two 8-bit words and indicates whether or not they are equal. The P=Q output indicates equality when it is low. A single active low enable is provided to facilitate cascading of several packages and enable comparison of words greater than 8-bits. This device is useful in memory block decoding applications, where memory block enable signals must be generated from computer address information. Features • • • • • • High Speed Operation: tpd (P or Q to Output) = 17 ns typ (CL = 50 pF) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 µA max Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C) Ordering Information Part Name Package Type Package Code (Previous Code) Package Abbreviation Taping Abbreviation (Quantity) HD74HC688P DILP-20 pin (JEDEC) PRDP0020AC-B (DP-20NEV) P — HD74HC688FPEL SOP-20 pin (JEITA) PRSP0020DD-B (FP-20DAV) FP EL (2,000 pcs/reel) HD74HC688RPEL SOP-20 pin (JEDEC) PRSP0020DC-A (FP-20DBV) RP EL (1,000 pcs/reel) Function Table Input H : L : X : Data P, Q P=Q P>Q P<Q X high level low level irrelevant Rev.2.00, Mar 30, 2006 page 1 of 7 Enable G L L L H Output P=Q L H H H HD74HC688 Pin Arrangement G 1 20 VCC P0 2 19 P=Q Q0 3 18 Q7 P1 4 17 P7 Q1 5 16 Q6 P2 6 15 P6 Q2 7 14 Q5 P3 8 13 P5 Q3 9 12 Q4 GND 10 11 P4 (Top view) Rev.2.00, Mar 30, 2006 page 2 of 7 HD74HC688 Logic Diagram P0 Q0 P1 Q1 P2 Q2 P3 Q3 P4 P=Q Q4 P5 Q5 P6 Q6 P7 Q7 G Absolute Maximum Ratings Item Supply voltage range Input / Output voltage Input / Output diode current Output current VCC, GND current Power dissipation Storage temperature Symbol VCC VIN, VOUT IIK, IOK IOUT ICC or IGND PT Tstg Ratings –0.5 to 7.0 –0.5 to VCC +0.5 ±20 ±25 ±50 500 –65 to +150 Unit V V mA mA mA mW °C Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Rev.2.00, Mar 30, 2006 page 3 of 7 HD74HC688 Recommended Operating Conditions Item Supply voltage Input / Output voltage Operating temperature Input rise / fall time*1 Symbol VCC VIN, VOUT Ta tr, tf Ratings 2 to 6 0 to VCC –40 to 85 0 to 1000 0 to 500 0 to 400 Unit V V °C ns Conditions VCC = 2.0 V VCC = 4.5 V VCC = 6.0 V Notes: 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. Electrical Characteristics Item Input voltage Output voltage Symbol VCC (V) VIH 2.0 4.5 6.0 VIL 2.0 VOH VOL Input current Iin Quiescent supply current ICC Min 1.5 3.15 4.2 Ta = 25°C Typ Max — — — — — — Ta = –40 to+85°C Min Max Unit 1.5 — V 3.15 — 4.2 — — — — — — — 0.5 1.35 1.8 — — — 0.5 1.35 1.8 V 4.5 6.0 2.0 4.5 6.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 6.0 6.0 1.9 4.4 5.9 4.18 5.68 — — — — — — — 2.0 4.5 6.0 — — 0.0 0.0 0.0 — — — — — — — — — 0.1 0.1 0.1 0.26 0.26 ±0.1 4.0 1.9 4.4 5.9 4.13 5.63 — — — — — — — — — — — — 0.1 0.1 0.1 0.33 0.33 ±1.0 40 V Test Conditions Vin = VIH or VIL IOH = –20 µA IOH = –4 mA IOH = –5.2 mA IOL = 20 µA V Vin = VIH or VIL µA µA IOL = 4 mA IOL = 5.2 mA Vin = VCC or GND Vin = VCC or GND, Iout = 0 µA Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns) Item Propagation delay time Symbol VCC (V) Min Ta = 25°C Typ Max Ta = –40 to +85°C Min Max tPLH tPHL 2.0 4.5 — — — 17 210 42 — — 265 53 tPLH tPHL 6.0 2.0 4.5 — — — — — 9 36 120 24 — — — Output rise/fall time tTLH tTHL 6.0 2.0 4.5 — — — — — 5 20 75 15 Input capacitance Cin 6.0 — — — — 5 13 10 Rev.2.00, Mar 30, 2006 page 4 of 7 Unit Test Conditions ns P or Q to output 45 150 30 ns Enable to P=Q — — — 26 95 19 ns — — 16 10 pF HD74HC688 Test Circuit VCC See Function Table VCC Input Pulse Generator Zout = 50 Ω G Output P1 P=Q P7 CL = 50 pF Q0 Q7 Note : 1. CL includes probe and jig capacitance. Waveforms • Waveform – 1 tr tf 90% 50% 10% P or Q VCC 90% 50% 10% 0V tw tPHL tPLH 90% 50% P=Q 50% 10% G tr tf 90% 50% VCC 90% 50% 10% 10% tPHL 0V tPLH 90% P=Q VOL tTHL tTLH • Waveform – 2 VOH 90% 90% 50% 10% tTHL 50% 10% tTLH Note : 1. Input waveform : PRR ≤ 1 MHz, duty cycle 50%, tr ≤ 6 ns, tf ≤ 6 ns Rev.2.00, Mar 30, 2006 page 5 of 7 VOH VOL HD74HC688 Package Dimensions JEITA Package Code P-DIP20-6.3x24.5-2.54 RENESAS Code PRDP0020AC-B Previous Code DP-20NEV MASS[Typ.] 1.26g D 11 E 20 1 10 b3 0.89 A1 A Z Reference Symbol L e1 D E A A1 bp b3 c θ e Z L θ bp e c e1 ( Ni/Pd/Au plating ) JEITA Package Code P-SOP20-7.5x12.8-1.27 RENESAS Code PRSP0020DC-A *1 Previous Code FP-20DBV Dimension in Millimeters Min Nom Max 7.62 24.50 25.40 6.30 7.00 5.08 0.51 0.40 0.48 0.56 1.30 0.19 0.25 0.31 0° 15° 2.29 2.54 2.79 1.27 2.54 MASS[Typ.] 0.52g D F 20 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" @ DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT @ INCLUDE TRIM OFFSET. 11 HE c *2 E bp Index mark Terminal cross section ( Ni/Pd/Au plating ) 1 e *3 bp x M L1 A Z Reference Dimension in Millimeters Symbol 10 A1 θ L y Detail F Rev.2.00, Mar 30, 2006 page 6 of 7 D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Min Nom Max 12.80 13.2 7.50 0.10 0.20 0.30 2.65 0.34 0.40 0.46 0.20 0.25 0.30 0° 8° 10.00 10.40 10.65 1.27 0.12 0.15 0.935 0.40 0.70 1.27 1.45 HD74HC688 JEITA Package Code P-SOP20-5.5x12.6-1.27 RENESAS Code PRSP0020DD-B *1 Previous Code FP-20DAV MASS[Typ.] 0.31g D NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. F 20 11 c HE *2 E bp Index mark Terminal cross section ( Ni/Pd/Au plating ) 1 Z 10 e *3 bp x Reference Dimension in Millimeters Symbol M A L1 A1 θ y L Detail F Rev.2.00, Mar 30, 2006 page 7 of 7 D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Min Nom Max 12.60 13.0 5.50 0.00 0.10 0.20 2.20 0.34 0.40 0.46 0.15 0.20 0.25 0° 8° 7.50 7.80 8.00 1.27 0.12 0.15 0.80 0.50 0.70 0.90 1.15 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2006. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .6.0