S1A THRU S1M R Surface Mount Glass Passivated Rectifier Reverse Voltage - 50 to 1000 Volts Forward Current -1.0Ampere S E M I C O N D U C T O R FEATURES SMA(DO-214AC) Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique For surface mounted applications Built-in strain relief, ideal for automated placement 。 High temperature soldering guaranteed:260 C/10 seconds at terminals Component in accordance to RoHS 200/95/EC and WEEE 200/96/EC 0.114(2.9) 0.100(2.54) 0.065(1.65) 0.049(1.25) 0.181(4.60) 0.157(3.99) MECHANICAL DATA 0.012(0.305) 0.006(0.152) 0.096(2.44) 0.078(1.98) Case: JEDEC DO-214AC molded plastic over glass passivated chip Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Polarity: Color band denotes cathode end Weight: 0.002 oz., 0.064 g 0.008(0.203) MAX 0.060(1.52) 0.030(0.76) 0.22(5.6) 0.189(4.80) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave 60Hz,,resistive or inductive load. For capacitive load, derate by 20%.) Symbols S1A S1B S1D S1G S1J S1K S1M Units 50 100 200 400 600 800 1000 35 70 140 280 420 560 700 Maximum DC Blocking Voltage VRRM VRMS VDC 50 100 200 400 600 800 1000 Volts Volts Volts Maximum average Forward Rectified Current 0.375"(9.5mm) lead length see Fig.1 I(AV) 1.0 Amp Peak Forward Surge Current (8.3ms half sinewave superimposed on rated load (JEDEC method) TA=75 C IFSM 30.0 Amps VF 1.1 Volts Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum Instantaneous Forward Voltage at 1.0 A Maximum Reverse current at rated DC Blocking Voltage TA =25°C TA =125°C Typical Thermal resistance (Note 2) 5.0 IR R R A 250.0 JA 75 JL 27 C/W Typical Junction Capacitance(Note 1) CJ 12 PF Maximum reverse recovery time(Note3) trr 2000 ns Operating and Storage temperature Range TJ,TSTG C -55 to+150 Note: 1.Measured at 1MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm)lead length, P.C.B. Mounted 3.Test conditions: IF=0.5A,IR=1.0A,IRR=0.25A. JINAN JINGHENG ELECTRONICS CO., LTD. 2-1 HTTP://WWW.JINGHENGGROUP.COM REV:A DATE:2014-01-14 SILICON RECTIFIER RATINGS AND CHARACTERISTIC CURVES S1A THRU S1M FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.0 0.8 INSTANTANEOUS FORWARD CURRENT( AMPERES) AVERAGE FORWARD CURRENT (AMPERES) FIG.1-FORWARD CURRENT DERATING CURVE 0.6 0.4 .20IN(5.0mm) 0.5mil inches(0.013mm) Thick Copper Pad Areas 0.2 0 20 0 40 60 80 100 120 140 160 LEAD TEMPERATURE ( C) FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 100 10 1 TJ=25°C PULSE WIDTH=300 S 1% DUTY CYCLE 0.1 0.01 0.4 1.0 0.8 1.2 1.4 1.6 1.8 2.0 2.2 8.3ms Single Half Sine Wave Tj=Tj max 20 FIG.4-TYPICAL REVERSE CHARACTERISTICS 10 5 2 0 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE(pF) 0.6 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 50 INSTANTANEOUS REVERSE CURRENT ( A) PEAK FORWARD SURGE CURRENT(AMPERES) 100 100 10 TJ=125 C 1 0.1 TJ=75 C TJ=25 C TJ=25 C 0.01 10 0.001 0 1 0.1 1 10 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE % 100 REVERSE VOLTAGE. (VOLTS) JINAN JINGHENG ELECTRONICS CO., LTD. 2-2 HTTP://WWW.JINGHENGGROUP.COM REV:A DATE:2014-01-14 140