Microminiature Slide Switches Actuating button provides contact seat ACTUAL SIZE • Housing Terminal board Contact spring maintains high contact force Terminal Current carrying contact "shoe" Design Features: •Volume and circuit board area less than 20% of most conventional sized slide switches of similar circuitry • Plug-in (PC board) or ear (panel) mounting • One and two pole • Two and three position • Detented or spring return • Reliable, yet moderately priced • Low contact resistance CW microminiature switches are designed to meet industry demand for tiny, yet reliable components at a moderate price. The extended linear motion of the moving contact over the relative closely spaced stationary contacts causes a full wiping and cleaning action of the contacts at each switch actuation. This helps maintain the reliability of the switch even in hostile environments. Where area and volume is limited... computers, thermostats, electronic controls and instruments, games and communication equipment... and reliability is essential... these switches are ideal. The switches are made in CW's modern facilities... stamping, molding, machining, plating, and assembly. They are tested and retested in CW's laboratories to mechanical and electrical performance standards consistent with those described herein. CW maintains full control of all processes of conversion of raw material to finished product. ISO 9001:2000 REGISTERED INDUSTRIES Catalog S2120-IV/06 130 James Way, Southampton, PA 18966-3838 • Tel. 215-355-7080 • Fax 215-355-1088 • www.cwind.com TERMINAL OPTIONS TERMINAL IDAHO Five terminal styles are available as shown. Choose P terminal that best suits your application from charts. ROUND FLAT DIMENSION/ STYLE G-20-55 G-20-57 G-20-58 G-20-74 G-20-29 G-20-104 G-20-139 G-20-140 G-20-32 A .133 ±.010 .093 ±.010 .200 ±.010 .178+ .010 .359 ±.010 .284 ±.010 .520 ±.010 .349 ±.010 .143 ±.010 (3.38 ± .25) (2.36 ± .25) (5.08 ± .25) (4.52 ± .25) (9.12±.25) (7.21 ± .25) (13.21 ±.25) (8.86 ± .25) (3.63 ± .25) .050 .050 .050 .050 .050 .050 .050 .050 (1.27) (1.27) (1.27) (1.27) 1.27 (1.27) (1.27) (1.27) .043 ± .003 (1.09 ±.08) C — — — — — — — — .021 ± .005 D - - - - - - - - - Style No. 1 1 2 2 2 2 2 2 3 B (.53 ±.13) GS-115 GS-115-PC 0.5 A at 125 Vac/Vdc 7i9.9o°5) • 0.5 A at 125 Vac/Vdc ' .040 l.02) y _.593 *— (15.06) H .1201 005 TYp ;3.051.0«)"K 1 .2201.00 '(,-, (5.591.25) \\<r [ H j l t w| tfSS&T >-(-p||,DIA.2 HOLES l__j .125 ^(3.18) Cfr *.1251.ois n3.l81.») " i jjj Lj y .1201.010 T p . (3.051.2S)TVR i T u - i .125 ^13.18) n t (5.081-25) (U.89)REF- '; [ |^3yj| Tj .1431.010 (3.631-25) L.043TVD " '-(1.09)"" Terminal options are available from styles 3,4, and 5. "Button height and style shown are standard. Other heights available are .140" (3.56 mm) and .210" (5.33 mm). For additional styles and heights, see page 4. GS-111 GS-111-1 0.5 A at 125 Vac/Vdc 1.0 A ac, 0.5 A at 125 Vdc GS-111 -PC 0.5 A at 125 Vac/Vdc j .762 (19.35) n j .562 14.27) .05|jr)0,A.5HOLESA 1 *IT> -~ 7.921.25) & U v .pJWj^ OK& fRAVE .016 (.41) t .1201-010 TYP _ (3.051.2»TYR ~f .3121.010 (7.92*.'5) 41 .260 u_ ^ (6.60) p T "Button height and style shown are standard. For additional heights and styles, see page 4. 41 rt" n lf|fgi -*-4 2"54)D'A'2HOLES *I874.0I5 T4.751.5") .228^-010 .090 T12.29) I .548 ,,EF T L____JL____i L.I331X)io (3.381.25) JL.020TV[, "^(.Sl)'"5 Terminal options are available from styles 1 and 2. 'Button height and style shown are standard. Other heights available are .342" (8.69 mm) and .500" (12.7 mm). *Button height and style shown are standard. Other heights available are .342" (8.69 mm) and .500" (12.7 mm). DIMENSION/ STYLE A G-20-47 .046 ±.010 (1.1 7 ±75) .043 ± .003 (1.09 ±.08) .025 ± .005 (.64 ±.13) B C 0 — Style No. 4 GI-116 G-20-49 .052 ±.010 (1.32 ±.25) .043 ± .003 (1.09 ±.08) .022 ± .005 (.56 ±.13) .054 ± .005 (1.37 ±.13) G-20-52 .100 ±.010 (2.54 ± .25) .043 ± .003 (1.09 ±.08) .021 ± .005 (.53 ±.13) 5 3 0.5 A at 125 Vac/Vdc — GS-100 G-20-61 .052 ±.010 (1.32 ±.25) .044 ± .003 (1.1 2 ±.08) .030 ± .005 (.76 ±.13) .054 ±.010 (1.37 + 0.25) G-20.62 .087 ±.010 (2.21 ± .25) .043 ± .003 (1.09 ±.08) .022 ± .005 (.56 ±.13) .100 ±.010 (2.54 ± .25) G-20-128 .162 ±.010 (4.11 ±.25) .032 ± .003 (.81 ± .08) .020 ± .005 (.51 ±.13) 5 5 4 — 0.5 A at 125 Vac/Vdc .2051 (5.211 I *I201.0IO r(3.05t.2») 9PK+.000 •"O-.OOB 99J+.000 •2Z5-,008 (5.72_' I 9 ) 15.7 2*^20) L.05 .050 (1.2 .27) .020 (.51) *Button height and style shown are standard. .183" (4.65 mm) also available. GS-113 Mp, .016 (.4 in n : , tJU L .380 0.5 A at 125 Vac/Vdc _*187t.oi5 (4.75±.3») iTi: L L GS-113-PC 0.5 A at 125 Vac/Vdc m I431.0IO 13.63L") , „IS^EF. ul IE IP i 1 i Terminal options are available from styles 3, 4, and 5. 'Button height and style shown are standard. Other heights available are .125" (3.18 mm), .250" (6.35 mm), and .377" (9.58 mm) INDUSTRIES "Button height and style shown are standard. Other heights available are .125" (3.18 mm), .250" (6.35 mm), and .377" (9.58 mm) 130 James Way, Southampton, PA 18966-3838 • Tel. 215-355-7080 • Fax 215-355-1088 • www.cwind.com DIMENSION/ G-20-63 STYLE A .052 + .010 (1.32 ±.25) .044 ± .033 (1.1 2 ±.08) .030 ± .005 (.76 ±.13) .08 ±.010 (2.03 ± .25) B C D Style No. GS-118 G-20-64 .077 ±.010 (1.96 ±.25) .043 ± .003 (1.09 ±.08) .025 ± .005 (.64 ±.13) — 5 G-20-73 .052 ±.010 (1.32 ±.25) .044 ± .003 (1.1 2 ±.08) .030 ± .005 (.76 ±.13) .125 ±.005 (3.1 8 ±.13) G-20-78 .031 ±.010 (.79 ± .25) .043 ± .003 (1.09 ±.08) .022 ± .005 (.56 ±.13) .066 ± .005 (1.68 ±.13) G-20-85 .243 ±.010 (6.1 7 ±.25) .043 ± .003 (1.09 ±.08) .021 ± .005 (.53 ±.13) 5 5 3 4 0.5 A at 125 Vac/Vdc — GS-118-PC G-20-90 .200 ±.010 (5.08 ± .25) .044 ± .003 (1.1 2 ±.08) .030 ± .005 (.76 ±.13) .080 ± .005 (2.03 ±.13) G-20-95 .286 ±.010 (7.26 ± .25) .043 ± .003 (1.09 ±.08) .022 ± .005 (.56 ±.13) .054 ± .005 (1.37 ±.13) G-20-102 .145 ±.010 (3.68 ± .25) .043 ± .003 (1.09 ±.08) .025 ± .005 (.64 ±.13) 5 5 4 0.5 A at 125 Vac/Vdc .020T (.51) Terminal options are available from styles 1 and 2. "Button height and style shown are standard. Other heights available are .140" (3.56 mm) and .210" (5.33 mm). For additional styles and heights, see below. "Button height and style shown are standard. Other heights available are .125" (3.18 mm) and .140" (3.56 mm). For additional styles and heights, see below. Button options... for switches charted only Available Button Part No. "A" Dimension GS-115 G-02-239 G-02-284 G-02-372 for use with topper G-02-383 G-02-239 .125, .140 .169 .197 .147 — X X X G-02-284 GS-1 15GS-1 180073 GS-1 18 0008 X X X X X X X X X G-02-372 For material specifications, accessories, and how to order, see back page. SELECTION GUIDE Model No. Ratings m.m GS-115 0.5 A at 125Vac/Vdc spdtwith detent r~~r— -, 0.5 A at 125VacA/dc spdtwith detent 5— £ 0.5Aat125Vac/Vdc LOAac 0.5Aat125Vdc spdtwith detent 0.5 A at 125Vac/Vdc Standard Terminals Actuation Pin TOP PC board Pin TOP (F™^--^ Panel Flat TOP spelt with x""t. — a PC board Pin TOP 0.5 A at 125Vac/Vdc spdtwith detent gzzzz£-=i PC board Flat SIDE =j 0.5 A at 125Vac/Vdc spdtwith detent T-^T—L PC board etched on one side Flat TOP j GS-113 0.5 A at 125Vac/Vdc dpdtwith detent &*"&—!> 3""A--^) Panel Pin TOP 0.5 A at 125Vac/Vdc dpdt with detent «"~fr— * ffF1^ PC board Pin TOP 0.5 A at 125Vac/Vdc sp-3-pos fW0^—^ with detent Panel Flat TOP 0.5 A at 125Vac/Vdc sp-3-pos with detent ^ PC board Flat TOP x GS-115-PC fill " ^Jfe^GS-nr iHpl GS-111-1* JL ^ff Gs-m-pc* ir ^S Mounting Panel ^|^^^^^^^^P GS-100 1 Circuit ^^f GS-113-PC j I 1 , ' GS-118 GS-1 18-0008 I "Recognized under the Component Recognition Program of Underwriter Laboratories, Inc. (UL File No. E9556) and certified by Canadian Standards Association (CSA File No. LR20985) PERFORMANCE STANDARDS+ cj\N switches are designed and manufactured to >erform when subjected to the following F c onditions: Operating temperature - 104°C £imbient maximum. FRelative humidity - After 1 00 hours in an citmosphere having 95% relative humidity and a t emperature of 50°C, switches will be operative cind insulation resistance will be greater than 100 megohms between contacts and housing, Life cycling (no load) - Switches will be operative after 10,000 (minimum) cycles at the rate of 10 cycles per minute at rated load, High-voltage breakdown - Minimum of 1000 volts rms 60 Hz for one minute between parts of opposite polarity, Contact resistance - Less than 0.01 ohms at 20 mAdc. il + Performance specifications and materials described herein are general specifications that vary depending on the switch construction specified and end application. Consult factory for specifications for specific models. Specifications subject to change without notice. J : v^ allowed tO drV for 5°C a Deriod Of One hOUr at (rOOm temperature). MATERIALS OF CONSTRUCTION CARE IN USE OF SWITCHES Actuator - Type 6/6 black nylon, other colors available CW switches will perform properly if they are installed and used properly. Causes for failure often encountered in the field that are the responsibility of the user are: 1. Removal of factory applied lubricants from switch contacts and moving parts. 2. Introduction of foreign material into switching mechanism... flux, solder, cleaning materials, and potting compounds. 3. Restriction of movement of switch button. 4. Excessive heat often introduced while soldering. 5. Switching loads in excess of rating. Housing - Cold-rolled steel, plated Housing plating - Panel: zinc, PC board: Electro-tin Terminal board - N.E.M.A. Grade XP Phenolic Laminate Terminals - Copper, silver-plated Moving contact - Copper alloys, silver-plated Contact spring - Beryllium copper or phosphor bronze """Materials described herein are general specifications that vary depending on the switch construction specified and end application. Consult factory for specifications for specific models. Specifications subject to change without notice. Toppers - Shown below is the "Topper" that can change your panel appearance and product styling. Fits onto button. Users are cautioned to avoid misusing switches and to test and approve switches for acceptability in end application. CW has no knowledge of and makes no representation with respect to the usefulness and/or merchantability of any product that is made to buyer's special engineering specifications. Hot Stamping - Functional or decorative marking of your choice can be imprinted on "Topper" surface with CW's "inhouse" facilities. HOW TO ORDER ACCESSORIES Colors - CW stores molding powders in many colors. "Toppers" and buttons are available in a variety of colors if your quantity is sufficient. Specify CW part number by referencing drawing that shows switch of your choice. If switch you require differs from drawing, specify differences from options available. Contact CW for information on the following CW products: .290 ? 7) _.500_ (12.70) < "Topper" Option G-02-373 (See button chart, page 4) Switches Standard Slide Switches: • One through four poles • Two through four positions • 3A through 13A@ 125V AC Miniature Slide Switches: • One through four poles • Two through four positions • 3A through 13A@ 125V AC » (5.13) » —» .185 .167 _J« » (4.24) .200 "(4.70) (5.08)~~ .150 _ (3.81) «—» -TOP OF SWITCH 1 ^ ---fi- ^ " 1 ^ -L .030_ ~' v - .020_ (.51) MicroMiniature Slide Switches: • One and two poles • Two and three positions •.5AO12VAC • One pole Fully Enclosed Microminiature Slide Switches: • One or two position «.5A@12VAC CW PATENTS CW Engineers are constantly trying to upgrade the quality and cost effectiveness of our switches. Often this results in new inventions. Switch products shown in this catalog may be covered by one or more of the following U.S. Patents: Rocker and Power Slide Switches: 3,270,149 3,311,719 IDC: 3,993,881 4,128,745 3,271,535 3,461,252 Other patent applications are pending. 4,404,437 4,410,232 • One and two poles • One & two positions & center-off • Miniature and standard sized • 8A through 16A@125V AC Connectors CW Industries also manufacturers a comprehensive product line of insulation displacement connectors, including Socket, Header, D-Subminiature, Card Edge, DIP, and PCB connectors. Available in commercial and military grades. Custom designed switches and connectors to meet special requirements are also available; consult factory. INDUSTRIES 130 James Way, Southampton, PA 18966-3838 • Tel. 215-355-7080 • Fax 215-355-1088 • www.cwind.com Printed in U.S.A.