11001

Series 152FB
Fusion-Bonded Cable Jumpers
FEATURES
• Flexible Fusion-bonded Jumpers Plug Directly into PC Boards or Sockets
• Stranded Wire Conductors Fusion-bonded with an Overcoat of Sn for Easy Soldering or Socketing
• Jumpers Shipped with Protective Tabs on Ends to Maintaining Proper Conductor Spacing
GENERAL SPECIFICATIONS
• INSULATION: UL VW-1, Style 2651 Polyvinyl Chloride (PVC) with optional Polarization Stripe on one side
• NOMINAL INSULATION THICKNESS: 0.009 [0.23]
• CONDUCTORS: 26-gauge, 7-strand Cu with Sn fusion-bonded overcoat
• OPERATING TEMPERATURE: -4°F to 221°F [-20°C to 105°C]
• VOLTAGE RATING: 300Vrms
• DIELECTRIC WITHSTANDING VOLTAGE: 1500Vrms
• INSULATION RESISTANCE: 10,000 MΩ per 10 feet [3.05 meters]
• RESISTANCE: 40.3Ω per 1000 feet [304.8 meters]
• PROPAGATION DELAY: 1.3ns/ft.
ORDERING INFORMATION
XX-XXXXX-152FB X
Option
P = Polarization Strip, along
one edge of cable*
Jumper Series
Cable Length “L” (inches)
2.00"=002
2.50"=002.5
2.25"=002.25
2.125"=002.125
Etc.
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE: 0.033 ±0.002 [0.84 ±0.05] dia.
No. of Conductors
4 thru 22
* Aries reserves the right to ship with or without unless
specified by customer.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
ALL CABLES SHIP WITH Pb-FREE MATERIAL UNLESS CUSTOMER SPECIFIED
WHEN ORDERING
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
# Conductors
Min. Insulation Length
4 thru 8
1.000 [25.40]
9 and 10
1.250 [31.75]
11 thru 22
1.500 [38.10]
CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION.
SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE
FURNISHED, DEPENDING ON QUANTITY.
ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS
WITHOUT NOTICE
PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE
CONSIDERED UNCONTROLLED
2609 Bartram Road • Bristol, PA 19007-6810 USA
TEL 215-781-9956 • FAX 215-781-9845
WWW.ARIESELEC.COM • [email protected]
11001
Rev. 1.5
1 of 1