Series 181 thru 183 90° Pin-Staked Flex Jumper FEATURES • Combination of Thin, Flexible, Solid Cu Conductors embedded between layers of Tough, Flexible, Flameretardant Insulation GENERAL SPECIFICATIONS • STANDARD CABLE INSULATION: White UL VW-1, Style 2643 Flame-retardant Polyester (Mylar) adhesive • HT CABLE INSULATION: High-temp, Flame-retardant Polyimide (Kapton) with acrylic adhesive • CABLE CONDUCTORS: Solid Cu with a cross-sectional area equivalent to that of 26-gauge AWG • FEMALE HOUSING: Black UL 94V-0 glass-filled Stanyl 4/6 Nylon ORDERING INFORMATION • CRIMP-ON PINS: Spring-tempered Cu 510 XX-XXXX-18X X X XX XX • PIN PLATING: 100µ [2.54µ] min. matte Sn per ASTM B54597(2004)e1 over 50µ min. Ni per ASTM AMS-QQ-N-290 –OR– Insulation Option 100µ [2.54µ] min. 93/7 Sn/Pb per SAE AMS-P-81728 over 50µ HT = High-temp cable insulation [1.27µ] min. Ni per SAE AMS-QQ-N-290B Plating Option • CABLE CURRENT RATING: 3 amps TL = Sn/Pb • CABLE VOLTAGE RATING: 300V Polarization Option • CABLE DIELECTRIC STRENGTH: 2500V/mil, min. (standard) P = Polarization stripe 4000V/mil, min. (high-temp) Bend Option • CABLE INSULATION RESISTANCE: 1000 MΩ min. (standard) A = Both ends bent 90°, same direction 100,000 mΩ (high-temp) B = One male end bent 90° • CONDUCTOR/CONTACT RESISTANCE (avg.): 20 mΩ initial (max. C = Both ends bent 90°, opposite direction 20 mΩ increase) based on a 2" cable at 20°C D = One female end bent 90° • STD OPERATING TEMPERATURE: -67 to 221°F [-55 to 105°C] Series • HT OPERATING TEMPERATURE: -67 to 257°F [-55 to 125°C] 181 = Male, both ends • ACCEPTS LEADS (female housing): 0.024-0.030 [0.61-0.76] 182 = Male/Female (Sn) 183 = Female, both ends (Sn) square, 0.150 [3.81] long min. Cable Length “L” (inches) 2" = 002 (min) 2.5" = 002.5 2.25" = 002.25 2.125" = 002.125 MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.033 ±0.002 [0.86 ±0.05] dia. No. of Conductors (4 thru 40) NOTE:Please contact the factory for price and availability of any high-temp (HT) cable larger than 20 conductors. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED MAY SHIP WITH OR WITHOUT POLARIZATION STRIPE UNLESS SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 11019 Rev. 11.4 1 of 2 Series 181 thru 183 90° Pin-Staked Flex Jumper ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED MAY SHIP WITH OR WITHOUT POLARIZATION STRIPE UNLESS SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 11019 Rev. 11.4 2 of 2