Series 171 thru 173 Flat Pin-Staked Flex Jumpers FEATURES • Combination of Thin, Flexible, Solid Cu Conductors Embedded between layers of Tough, Flexible, Flameretardant Insulation GENERAL SPECIFICATIONS • STANDARD CABLE INSULATION: white UL VW-1, Style 2643 flame-retardant Polyester (Mylar) adhesive • HIGH-TEMP FLAME-RETARDANT CABLE INSULATION: Polyimide (Kapton®) with Acrylic Adhesive • CABLE CONDUCTORS: solid Cu with cross-sectional area equivalent to 26-gauge AWG • FEMALE HOUSING: black UL 94V-0 glass-filled Stanyl® 4/6 Nylon • CRIMP-ON PINS: spring-tempered Cu 510 • PIN PLATING: 100µ [2.54µ] min. matte Sn per ASTM B545-97(2004)e1 over 50µ [1.27µ] min. Ni per SAE AMS-QQ-N-290; –OR– 100µ [2.54µ] min. Sn/Pb per SAE AMS-P-81728 over ORDERING INFORMATION 50µ [1.27µ] min. Ni per SAE AMS-QQ-N-290B XX-XXXXX-17X X XX XX • CABLE CURRENT RATING: 3 amps • CABLE VOLTAGE RATING: 300V Optional Insulation • CABLE DIELECTRIC STRENGTH: 2500V/mil, min. (standard) 4000V/mil, min. HT = High-temp (high-temp) Optional Plating • CABLE INSULATION RESISTANCE: 1000 MΩ min. (standard) 100,000 mΩ TL = Sn/Pb (high-temp) Optional Stripe • STD OPERATING TEMPERATURE: -67 to 221°F [-55 to 105°C] P = Polarization Stripe • HT OPERATING TEMPERATURE: -67 to 257°F [-55 to 125°C] (along one edge of cable)* • FEMALE HOUSING ACCEPTS LEADS: 0.024-0.030 [0.61-0.76] square, 0.150 Jumper Series [3.81] long min. 171 = Male Sn, both ends 172 = Male/Female, both Sn 173 = Female Sn, both ends MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.032 ±0.002 [0.81 ±0.05] dia. Cable Length “L” (inches) 2.00" = 002 (min) 2.50"=002.5 2.25"=002.25 2.125"=002.125 Etc. No. of Conductors 4 thru 40 * Aries reserves the right to ship with or without unless specified by customer. NOTE:Please contact the factory for price and availability of any high-temp (HT) cable larger than 20 conductors. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR CABLE LENGTHS UNDER 2.000 [50.80], CONSULT FACTORY FOR 90° PIN STAKED FLEX JUMPERS, SEE DATA SHEET 11019 FOR RoHS APPLICATIONS, USE HT CABLE CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 11005 Rev. 10.5 1 of 2 Series 171 thru 173 Flat Pin-Staked Flex Jumpers ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR CABLE LENGTHS UNDER 2.000 [50.80], CONSULT FACTORY FOR 90° PIN STAKED FLEX JUMPERS, SEE DATA SHEET 11019 FOR RoHS APPLICATIONS, USE HT CABLE CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 11005 Rev. 10.5 2 of 2