Series 8 Elevator Socket w/Bifurcated Contacts & Solder Pin Tails FEATURES • Ideal for Elevating Devices (Displays, Switches, etc.) to Desired Level with 0.260 to 1.250 [6.60 to 31.75] Height Extension GENERAL SPECIFICATIONS • STANDARD SOCKET BODY & SPACER: black UL 94V-0 glass-filled 4/6 Nylon • BIFURCATED CONTACTS: Grade A spring-tempered Phosphor Bronze per QQ-B-750 • CONTACT PLATING: 50-130µ [1.27-3.30µ] matte Sn per ASTM B545-97(2004)e1 over 50µ [1.27µ] Ni per SAE AMS-QQ-N-290B; –OR– 50-130µ [1.27-3.30µ] 90/10 Sn/Pb per MIL-T-10727 Type 1 over 50µ [1.27µ] Ni per SAE AMS-QQ-N-290B; –OR– 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ] Ni per SAE AMS-QQ-N-290B. (Consult factory for availability) ORDERING INFORMATION • CONTACT CURRENT RATING: 1 amp • INSERTION FORCE: 110g/pin average XX-X8 XXXX-1XXX XX • WITHDRAWAL FORCE: 75g/pin average Optional Rails • OPERATING TEMPERATURE: -67°F to 221°F [-55°C to 105°C] Sn and Sn/Pb WR = Without Rails plating; -67°F to 257°F [-55°C to 125°C] Au plating Plating • ACCEPTS: flat leads up to 0.014 thick x 0.020 wide [0.36-0.51], round leads up 10 = Sn to 0.020 [0.51] dia. 10TL = Sn/Pb • SOCKET ACCEPTS: lead lengths from seating plane 0.075-0.160 [1.91-4.06] 11 = Au (Consult Factory) Seating Plane Height (See Table, Dim “C”) Row-to-Row Spacing 8 = 0.300 [7.62] centers (14- & 16-pin) 28 = 0.200 [5.08] centers (10-pin only) No. of Pins (10, 14, 16) MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.035 ±0.002 [0.89 ±0.05] dia. Part No. 10-28440-10 14-8260-10 14-8350-10 14-8400-10 14-8435-10 14-8470-10 14-8510-10 14-8620-10 14-8770-10 14-8870-10 14-81000-10 14-81100-10 14-81187-10 14-81250-10 16-8430-10 16-8480-10 16-8700-10 16-8810-10 16-81250-10 Dim. "C" 0.440 [11.18] 0.260 [6.60] 0.350 [8.89] 0.400 [10.16] 0.440 [11.18] 0.470 [11.94] 0.510 [12.95] 0.620 [15.75] 0.770 [19.56] 0.870 [22.10] 1.000 [24.40] 1.100 [27.94] 1.180 [29.97] 1.250 [31.75] 0.430 [10.92] 0.480 [12.19] 0.700 [17.78] 0.810 [20.57] 1.250 [31.75] ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR COLLET CONTACTS ON 0.200 [5.08] CENTERS, SEE DATA SHEET 13007 FOR COLLET CONTACTS ON 0.300 [7.62] CENTERS, SEE DATA SHEET 13008 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 13006 Rev. 1.2 1 of 1